The Aggre-Dry Washer — GreyStone Inc.’s sand dewatering unit — combines a fine material screw and dewatering screen to produce sand and gravel products with a moisture content as low as 8 to 13 percent, by weight, while using only 30 hp (22 kW) to wash and dewater up to 100 tons (90.7 t) per hour.

Here’s how the Aggre-Dry Washer washes and dewaters aggregate material: a standard GreyStone inclined single-spiral fine material washer (FMW) initially dewaters the material, doing the bulk of the work. At the same time, the rotation of the dewatering screw scrubs the material to help remove surface dirt. The action of the screw flights sends the sand up the inclined tub, and ensures that the dewatering screen located at the top of the flights will be evenly fed. The vibratory dewatering screen further removes moisture from the sand. This combined process produces a caked, dry sand product that neither an inclined dewatering screw nor a vibratory screen can separately achieve.

The GreyStone dewatering screen, curved around the spiral flights on the Aggre-Dry Washer, has several features. A 0.25-mm screen opening reduces the amount of material that can fall through the screen. The feed from the screw allows the material to build to a bed depth of 14 in. (36 cm) on the screen, squeezing additional moisture from the sand as the vibratory motors move it along the length of the screen cloth, further reducing moisture content.

The GreyStone unit re-introduces the throughs from the screen back into the screw’s washing process, where the screw portion of the unit again pushes it to the unit’s dewatering screen, increasing the amount of salable product. This process eliminates the need for costly pumps and cyclone sand separation systems — along with the additional horsepower this equipment requires, according to the manufacturer.

GreyStone also states that the Aggre-Dry Washer should use less than half of the horsepower required to process the same tonnage of spec product on a traditional screen/cyclone system. In addition, GreyStone has increased the water handling capacity of these units, making the Aggre-Dry even more versatile for aggregate producers.

As production of these units increases, GreyStone will offer them in all of the company’s standard fine material washer sizes, from 36 in. by 28 ft. (91.4 cm by 8.5 m) to 84 in. by 38 ft. (213.4 cm by 11.6 m).

GreyStone manufactures a complete line of portable and semi-portable washing/screening plants, sand classification tanks and systems, single and twin fine material dewatering screws, single and twin coarse material washers, log washers, computer control systems, portable sand plants, water clarifiers, rotary and vibrating screens, portable conveyors and radial stackers, blade mills, portable screening plants, twin jets, cutter heads and aggregate reclaiming systems.

For more information, call 888/346-9274 or visit www.greystoneinc.com.

Today's top stories

Louisville Pump Station Receives $230M Update

Amtrak Secures $112M in Federal Funds to Upgrade 13 Projects in Northeast Corridor

Hitachi Construction Machinery Wins Silver in 2024 Anthem Award

Turner Construction Leads $675M Concourse Project

Bobcat Celebrates Season of Giving With Volunteerism, Hurricane Relief, Philanthropic Support

MassDOT Plans to Replace Cape Cod's Sagamore Bridge With Two, Three-Lane Spans

HIPOWER Unveils T4F Mobile Power Models

Illinois DOT Celebrates Completion of I-55 Interchange Near Joliet, Shorewood