The TBA transportable asphalt mixing plant covers the performance ranges
176 to 352 ton (160 to 320 ton) per hour and is suitable for semi-mobile and stationary use.
Leading recycling technology from Benninghoven — recycling drum using counterflow action with hot-gas generator — is now also installed on the TBA.
The TBA transportable asphalt mixing plant covers the performance ranges
176 to 352 ton (160 to 320 ton) per hour and is suitable for semi-mobile and stationary use. The design of the main components in container format with plug-in wiring allows for ideal transport options and reduced set-up times for the modular system. The high level of flexibility, available options, recycling feed systems and continuous retrofitting options for the components turn the TBA into an impressive all-rounder, according to the manufacturer.
The large storage capacities on the hot bin section and mixed material loading silo offer real added value. The intermediate storage of the dried, heated and sorted virgin mineral is available in capacities of 66, 88 and 143 ton (60, 80 and 130 t) in five, six or seven bins. There is still the possibility of combining or separating sand and bypass, discharging oversize aggregate outside or collecting it in the final bin.
An integrated mixed material loading silo in dimensions of 46 to 570 ton (42 to 517 t) ensures a sufficient buffer while also providing storage capacity for up to seven asphalt types (recipes). Due to the modular system, this can be expanded or retrofitted at any time.
Asphalt Every 45 Seconds
The TBA 2000, 3000 and 4000 have a 2000, 3000 or 4000 kg mixer and ensure a mixing capacity of 176, 264 or 352 ton (160, 240 or 320 t) per hour. The systems of this type are particularly robust in structure. This enables the system to be installed even in earthquake zones and to withstand strong wind loads. However, every TBA can be easily transported and quickly erected in another location due to its modularity and pre-wiring.
Highlights of Transportable Benninghoven System (TBA)
- Modular system
- Wide performance range
- RAP system over 80 percent
- Large variety of options
- Rugged design, therefore resistant to earthquakes and strong wind load
- Easy transportability and short set-up time due to the design of the main components in container format with plug-in wiring ("Plug & Work")
- Storage capacity of loading silo up to 570 ton (517 t)
Leading Benninghoven Recycling Technologies
The mixing of recycled asphalt is a top priority when it comes to conserving natural resources. This is just one of many important reasons for the re-use of asphalt — national legislation, the reduction of emissions and increased cost efficiency are also key arguments for utilising the green technology from Benninghoven. The following technologies can be integrated in TBA plants:
Cold recycling feed systems:
- Mixer feed — for recycling quotas of up to 30 percent
- Multi-variable feed — for recycling quotas of up to 40 percent
Hot recycling feed systems:
- Parallel drum — for recycling quotas of up to 70 percent
- New: Recycling drum using counterflow action with hot-gas generator — for recycling quotas of up to 80 percent
Combination of hot and cold feed systems:
- The use of hot feed systems pays off in particular for large quantities and for high recycling feed quotas of up to 80 percent. An additionally installed cold feed system with a possible feed quota of up to 40 percent gives the customer the necessary flexibility. The cold feed system can be used for processing small quantities of up to 2.2 ton (2 t), while the hot feed system is used for processing large orders.
Proven System From the Major BA RPP Series Now Available On the TBA Series
In hot recycling, the challenge is to heat the recycling material to the optimum application temperature of 160C while keeping emissions in the standard range and not burning the contained bitumen — especially as ever stricter standards and limit values will apply in future.
Benninghoven has the answer to this apparent conflict of interests with the hot-gas generator — a solution that is environmentally friendly, future-proof and a secure investment. Here, the recycling material — in addition to the virgin mineral — is heated by an EVO JET burner. However, this takes place indirectly in a recycling drum using counterflow action. Depending on the quality of the recycled material used, even feed quantities of more than 90 percent are possible.
Energy-Efficient, Environmentally Friendly Mixing of Recycled Asphalt
Unlike conventional parallel drums used for recycling, these recycling drums use counterflow action for heating the gas indirectly. Here, the material is conveyed in the opposite direction to the heat source. As a result, the discharge temperature of 160C is the same as the application temperature, with the exhaust gas temperature only approximately 100C (though above the dew point). This procedure leads to key advantages for the operators of asphalt mixing plants. In classic recycling systems using the parallel flow principle, the temperature is limited to 130C by the resulting exhaust gas emissions. However, the exhaust gas temperatures physically exceed this, which leads to increased energy consumption and a greater load on the dust collection system. In order for the asphaltic mixture to reach a temperature of 160C, overheated virgin mineral must be conveyed.
The EVO JET burner can be supplied with different fuels as normal and supplies the thermal energy required for drying and heating the recycling materials. The generated hot air is mixed intensively with the circulating air, also using counterflow action. In doing so, the hydrocarbons (total C) in the exhaust air are almost completely eliminated.
The Benninghoven hot-gas generator thus makes an effective contribution to energy efficiency, cost efficiency and proactive environmental protection.
Highlights of the BENNINGHOVEN Hot-Gas Generator:
- Economical: The recycling feed quota can be significantly increased – depending on the quality to over 90 + X percent. This offers real added value.
- Energy efficient: Total energy required for operation of the plant is reduced.
- Environmentally friendly: Using a hot-gas generator means that emissions are significantly below the standard range (complies with TA Luft requirements).
Today's top stories
