Mon September 28, 2015
Vögele MT 3000-2i Offers Increased Performance
The newly designed MT 3000-2i material transfer vehicle from Vögele offers increased performance in material transfer vehicles for asphalt paving. This machine is designed with the contractor in mind for enhanced productivity, low operating costs and maneuverability, according to the manufacturer....
Wirtgen - Wed March 11, 2015
Wirtgen TCM 1800 Texture Curing Machine Offers High Productivity
The TCM 1800 texture curing machine from Wirtgen America offers high productivity curing and texturing of portland cement concrete slabs. This self-propelled, track-mounted texture curing machine follows behind the slipform paver when placing concrete slabs, and is equipped with an automatic brooming and spraying system which adds pavement texture, and then a thin film of curing compound....
Kleemann - Tue February 24, 2015
The Mobirex MR 110 ZSi EVO 2 Builds on Proven Sucess
Kleemann's MR 110 ZSi EVO 2 impact crusher is the slightly smaller version of the MR 130 ZSi EVO 2. EVO 2 represents the continuing evolution of the successful EVO Contractor Line, with additional benefits in terms of economy and operational safety....
Wirtgen - Tue February 24, 2015
Wirtgen SP 90i Paver Series Permits Paving up to 30 ft. Wide
The Wirtgen SP 90i series of large slipform pavers — which permits paving from 6 to 30 ft. (1.8 to 9 m) — includes the two-track SP 92i, and the four-track SP 94i. The "i" in SP 90i designates these pavers as having "intelligent" power and emissions control systems, and both the SP 92i and SP 94i are Tier IV final emissions compliant....
Wirtgen - Tue February 24, 2015
Wirtgen SP 15i Offers a Great Variety of Setup Options
Wirtgen's SP 15i concrete slipform paver updates the existing SP 15 with Tier IV interim emissions technology, but both are true multipurpose machines that lay curb and gutter, barrier, sidewalk, V-ditch, special applications and slabs....
Mon November 03, 2014
W 250i Is Wirtgen’s Most Powerful Cold Mill
Wirtgen’s Tier IV interim-compliant W 250i offers high rates of productivity, maximum cost efficiency and fuel-efficient i-machine technology. This large cold mill can remove asphalt layers with a milling depth of up to 14 in....
Fri October 31, 2014
Full H i-series Line Available
Hamm’s “earthshaking” full line of technically advanced, Tier IV-interim emissions compliant H i-series of soil compactors is making waves in North America. Since its introduction, the 43,383-lb....
Mon August 25, 2014
Generation X Cutting Tools
Wirtgen America’s Generation X point-attack cutting tools are enhancing the performance and cost-efficiency of cold milling machines, resulting in higher productivity and better performance in the cut....
Mon August 25, 2014
Improved Rumble Strip Cutter Boasts Tier IV Interim Emissions Controls
Wirtgen America’s new high-performance rumble strip cutter, the W 50 DCi rumbler, is a standard W 50 DCi cold milling machine with an optional rumbler attachment installed, providing high-production, high-profitability cutting of milled rumble strips in the standard, preferred 16-in....
Mon August 25, 2014
Wirtgen 3800 CR Offers Wider Options for Cold-in-Place Recycling, Cold Milling
The 3800 CR from Wirtgen America Inc. offers the ability to cold-in-place recycle a full-lane of pavement in one pass, stabilizing with either foamed asphalt or any other stabilizing medium such as asphalt emulsion or lime or cement slurry, but with a twist: with a conveyor mounted, it also will serve as a full-lane cold mill....
