The operational principles of the CR 1100 are based on high torque and a slow rotating crushing drum that is powered by two direct drive motors that produce a maximum cutting force of 172kN (38500 ft lbf).

All around the world the use of secondary materials is increasing, supporting the circular economy and the efficiency of material usage.

Remu's new crushing bucket, the CR 1100, is designed to decrease the volume of most common materials from demolition sites including tiles, concrete, drywall and asphalt, according to the manufacturer.

The operational principles of the CR 1100 are based on high torque and a slow rotating crushing drum that is powered by two direct drive motors that produce a maximum cutting force of 172kN (38500 ft lbf).

When material hardness is less than 25 Mpa, the performance of the crushing bucket with a rotating drum is higher than those with the technology of a jaw crusher, according to the manufacturer.

The CR 1100 crusher can be operated with a 25 to 40 ton excavator and will process one bucket load (1.1 cu. yd. [1 cu m]) of volume in approximately 1.5 minutes. This means the total processing capacity is 52 cu. yds. (40 cu m) per hour.

"According to our tests the bucket performs well with mixed demolition waste including regular concrete, steel, wood, plastic, etc. High-strength concrete and hard stones like granite are still out of our range," Jussi Saari, leading engineer of REMU, said.

For more information, visit www.remu.fi.

This story also appears on Aggregate Equipment Guide.

Today's top stories

Des Moines Airport Works With Weitz/Turner On Expansion

ROMCO Equipment Co., SMT Acquire Bee Equipment Sales

San Francisco County Transportation Authority Bridges Retrofit Addresses Seismic Safety

Year in Review: Bobcat's Major Moments of 2024

MassDOT to Use Drones for Infrastructure Projects; Amherst Exploring New Downtown Designs

Iowa DOT's I-35 Project Includes New Bridges

JM Wood Holds December Auction in Montgomery, Alabama

DEVELON Set to Exhibit at ARA Show 2025