List Your Equipment For Free  /  Seller Login

Small Army of Cranes Helps Construct Pritzker Military Archives Center in Wisconsin

Wed January 19, 2022 - Midwest Edition
ALL Family of Companies


In the first major phase of construction, Dawes sent six cranes to help lift and secure two 250-ft. steel trusses that form opposite sides of the structure. (Archives & Armory of PMML photo)
In the first major phase of construction, Dawes sent six cranes to help lift and secure two 250-ft. steel trusses that form opposite sides of the structure. (Archives & Armory of PMML photo)
In the first major phase of construction, Dawes sent six cranes to help lift and secure two 250-ft. steel trusses that form opposite sides of the structure. (Archives & Armory of PMML photo) Each truss was hinged to the bottom of the structure, with cranes rigged to the truss and lifting in unison to take the workpieces from horizontal on the ground to vertical. (Archives & Armory of PMML photo)

Construction of an ambitious archive dedicated to military history is under way in Somers, Wis.

The Pritzker Military Archives Center (PMAC) sits on the 288-acre Pritzker Military Archives & Memorial Park (PAMPC) development, featuring the archive center and 9,400-sq.ft. gallery.

Dawes Rigging & Crane Rental, a member of the ALL Family of Companies, has been involved in construction nearly from the beginning. Most recently, two separate battalions of cranes were deployed to help construct the project's centerpiece building.

In the first major phase of construction, Dawes sent six cranes to help lift and secure two 250-ft. steel trusses that form opposite sides of the structure.

Each truss was hinged to the bottom of the structure, with cranes rigged to the truss and lifting in unison to take the workpieces from horizontal on the ground to vertical. Trusses were erected by Area Erectors, Dawes' customer. Joint general contractors are Pepper/Riley Construction.

Dawes provided two Link-Belt HTC-8675, two Liebherr LTM 1130-5.1, and one each Liebherr LTM 1230-5.1 and Link-Belt ATC 3210.

"These two large trusses wing off the edge of the building," said Tyler Weiher, rental specialist with Dawes. "We set up three cranes on each side to stand up the trusses and hold the angle while an RT came in to tie the trusses into the building."

Seeing six cranes lifting in perfect unison is something to behold, and it took a lot of planning. First, Fast Track Engineering assessed the trusses and developed a plan for placing each crane, including precisely how much load each unit should carry during every phase of the lift. Once submitted, Dawes' in-house engineer reviewed the plan and signed off on it.

"We used dynamometers on each load point, which gave us the range each crane needed to stay within," said Weiher. "We used that information to spec the crane package for the lift."

Dawes' crane operators could then keep an eye on load cells during the lift to know they were within range.

The resulting lifts went off smoothly and both trusses were up and secured within the same 10-hour workday.

The teamwork wasn't over. Later in the project, Dawes delivered a separate five-crane package to lift and set two 85-ft. cantilevered trusses. To be set at the front of the structure, these will jut out on either side of the entrance courtyard.

Although these trusses were much smaller than those in the previous lift, this lift was actually more complicated because each truss had to be lifted, rotated and angled before being set. Plus, they were not already hinged to the building as the others had been.

The cranes Dawes supplied were two Link-Belt HTC-86100, two Link-Belt HTC-8675, and one Liebherr LTM 1130-5.1. The HTC-86100 and HTC-8675 hooked to each truss and performed the initial lift and rotation. Next, the Liebherr LTM 1130-5.1 dropped its hook down to the base and lifted to achieve the proper angle. Each piece was held in position for approximately four hours while ironworkers welded it into position.

Recently, Dawes delivered a Liebherr LTM 1450-8.1 to set two pedestrian bridges on the grounds. Work at the site is scheduled to be completed in phases over the next several years.

For more information, visit www.allcrane.com.

About Pritzker Archives & Memorial Park Center

The Pritzker Archives & Memorial Park Center supports the Pritzker Military Museum & Library's mission of preserving the past, present and future of the citizen soldier.

This archive center is a space to restore, preserve and provide storage for collections that include books, artifacts, and other historic materials. Other components of the project include a 9,687 sq.-ft. gallery that will display exhibits drawing from the Pritzker Military Museum & Library in Chicago; Commercial Archives, a facility specializing in firearms education and training; Cold War Veterans Memorial; and community green space.

For more information, visit www.pritzkerarchivespark.com.

This story also appears on Crane Equipment Guide.




Today's top stories

Webber Ahead of Plans On I-10 Widening in Texas

Progress Continues On $250M Columbus LOT Project

Volvo Holiday Lights, Fan Voting Begin

Work Continues On Largest Project in NYSDOT History

Case Introduces Limited Signature Edition Backhoe Loader for Iconic Presence On Job Site

VIDEO: Norwalk, Conn.'s Fire-Damaged I-95 Overpass Reopens Early, $3.2M Under Budget

Six Small Bridges in Plymouth, Vt., to Be Replaced Over Two Years Starting Next Summer

FAE's Expands Range With Its New SFL Multitask Head


 







39.95234 \\ -75.16379 \\ Fort Washington \\ PA