List Your Equipment For Free  /  Seller Login

2005 Case 885 For Sale in Lena, WI



For Sale: $64,800.00 USD

Apply for Financing

Machine Info:

Stock Number:7411
Machine Location:LENA, WI

Description:

Nice low houred grader 5,500 Hrs, 14' Moldboard, A/C and New Tires. Runs out very good. Front straight knock down blade.,, Ask about Our Warrantied Equipment., Financing available to qualified buyers through AgDirect., If you don’t see what you’re looking for visit dbequip. com and click on our ‘want to buy search’. All of our machines are located in our yard in Lena, WI 54139. Each piece of equipment is test run then is serviced in our shop by quality technicians. D&B Construction Equipment Inc has been selling and servicing used construction equipment for over 40 years. We have a full staff of salesmen and technicians with over 100 years of combined experience. Our experience gives us what we need to help you.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Blades
Maximum Shoulder Reach Outside of Tires - Left6.6 in  ( 17 cm )
Maximum Shoulder Reach Outside of Tires - Right7.3 in  ( 19 cm )
Moldboard Sideshift - Left21.0 in  ( 53 cm )
Moldboard Sideshift - Right27.0 in  ( 69 cm )
Circle
Diameter69.0 in  ( 175 cm )
Max Lift Above Ground17.5 in  ( 44 cm )
Rotation360 deg
Dimensions
Blade Base8.5 ft  ( 3 m )
Front Ground Clearance2.1 ft  ( 1 m )
Height to Top of Isomount Cab11.0 ft  ( 3 m )
Overall Length28.0 ft  ( 9 m )
Rear Ground Clearance1.3 ft  ( 0 m )
Tandem Axle Wheelbase5.3 ft  ( 2 m )
Wheelbase20.5 ft  ( 6 m )
Width Over Tires8.7 ft  ( 3 m )
Engine
AspirationTurbocharged and Aftercooled
Base Power (1st Gear) - Net205.0 hp  ( 153 kw )
Displacement411.0 cu in  ( 6,735 cu cm )
Engine ModelQSB 6.7 Tier III certified electronic control
Max Power205.0 hp  ( 153 kw )
Net Power Gears 7-8205.0 hp  ( 153 kw )
Net Torque Gears 7-8650.0 lbs ft  ( 881 nm )
Number of Cylinders6.0
Power Measured @2,200.0 rpm
Torque Measured @1,500.0 rpm
Front Axle
Ground Clearance2.1 ft  ( 1 m )
Oscillation - Total38 deg
Wheel Lean17.5 deg
Hydraulic System
Pump Flow37.9 gpm  ( 143 lpm )
Pump TypePiston
Relief Valve Pressure6,092.0 psi
Moldboard
Max Depth of Cut28.0 in  ( 71 cm )
Moldboard Height23.6 in  ( 60 cm )
Moldboard Length14.0 ft  ( 4 m )
Moldboard Thickness0.9 in  ( 2 cm )
Moldboard Width14.0 ft  ( 4 m )
Side Shift Left21.0 in  ( 53 cm )
Side Shift Right27.1 in  ( 69 cm )
Operating Specifications
Alternator Supplied Amperage80 amps
Circle Gearbox Fluid Capacity0.8 gal  ( 3 l )
Cooling System Fluid Capacity10.5 gal  ( 40 l )
Fuel Capacity90.0 gal  ( 341 l )
Hydraulic System Fluid Capacity50.2 gal  ( 190 l )
Oil System Fluid Capacity4.7 gal  ( 18 l )
Operating Voltage24.0 volts
Operating Weight37,950.0 lbs  ( 17,214 kg )
Rear Diff/Final Drive Fluid Capacity3.2 gal  ( 12 l )
Std Operation Weight - Front Axle11,227.0 lbs  ( 5,092 kg )
Std Operation Weight - Rear Axle26,723.0 lbs  ( 12,121 kg )
Std Operation Weight - Total37,950.0 lbs  ( 17,214 kg )
Tandem Case Fluid Capacity (each)6.0 gal  ( 23 l )
Tire Size14.0 x 24 12PR TL G2 Firestone
Transmission Fluid Capacity5.0 gal  ( 19 l )
Steering System
Articulation Angle25 deg
Turning Radius23,914.1 ft  ( 7,289 m )
Transmission
Max Speed - Forward26.7 mph  ( 43 kph )
Max Speed - Reverse19.0 mph  ( 31 kph )
Number of Gears - Forward8.0
Number of Gears - Reverse4.0
Transmission TypePower Shift

Dealer Contact Info:

D&B Construction Equipment




Contact: Sales Department

Click for Phone Number


veritread button





39.95234 \\ -75.16379 \\ Fort Washington \\ PA