Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $39,000.00 USD
Apply for FinancingHours: | 3963 |
Machine Location: | SHERBROOKE, QC |
More Information: | https://excelko.com/inventory/skid+steers/2013-cat-259b+3-sherbrooke-qc-67327cfe002ef0b5880101f7/ |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 8.0 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.0 ft ( 3 m ) |
Clearance at Max Lift and Dump | 7.4 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 88.0 in ( 224 cm ) |
Departure Angle | 35 deg |
Ground Clearance | 9.0 in ( 23 cm ) |
Length - Track on Ground | 59.0 in ( 150 cm ) |
Length - with Bucket | 11.3 ft ( 3 m ) |
Length - With Bucket on Ground | 135.0 in ( 343 cm ) |
Maximum Dump Angle | 49.5 deg |
Maximum Overall Height | 152.0 in ( 386 cm ) |
Maximum Reach - With Arms Parallel | 53.0 in ( 135 cm ) |
Overall Length - Track | 79.0 in ( 201 cm ) |
Rack Back Angle - Maximum Height | 87 deg |
Reach at Max Lift and Dump | 2.5 ft ( 1 m ) |
Reach at Maximum Lift/Dump | 29.0 in ( 74 cm ) |
Turn Radius from Center - Bucket | 86.0 in ( 218 cm ) |
Turn Radius from Center - Coupler | 55.0 in ( 140 cm ) |
Turn Radius from Center - Rear | 58.0 in ( 147 cm ) |
Turning Radius from Center - inc bucket | 85.6 in ( 217 cm ) |
Turning Radius from Center - machine rear | 58.0 in ( 147 cm ) |
Vehicle Width | 66.0 in ( 168 cm ) |
Width Over Tracks | 5.8 ft ( 2 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 201.0 cu in ( 3,294 cu cm ) |
Engine Model | Cat C3.4T |
Gross Power | 74.0 hp ( 55 kw ) |
Gross Power - SAE J1995 | 74.0 hp ( 55 kw ) |
Net Power | 71.0 hp ( 53 kw ) |
Net Power - SAE 1349 | 71.0 hp ( 53 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow |
Hydraulic Power | 42.8 hp ( 32 kw ) |
Hydraulic Power - Calculated | 60.3 hp ( 45 kw ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Pump Flow | 22.0 gpm ( 83 lpm ) |
Relief Valve Pressure | 3,335.0 psi |
Loader | |
Breakout Force | 4,508.5 lbs ( 2,045 kg ) |
Operating Load | 2,949.8 lbs ( 1,338 kg ) |
Tipping Angle | 5899.6 deg |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Tilt Cylinder | 4,508.0 lbs ( 2,045 kg ) |
Cooling System Fluid Capacity | 2.7 gal ( 10 l ) |
Engine Oil Capacity | 2.4 gal ( 9 l ) |
Fuel Capacity | 22.2 gal ( 84 l ) |
Ground Contact Area | 1,495.0 cu in ( 24,499 cu cm ) |
Ground Pressure | 6.0 psi |
Hydraulic System Fluid Capacity | 14.6 gal ( 55 l ) |
Max Speed - high range | 8.5 mph ( 14 kph ) |
Max Speed - low range | 5.9 mph ( 10 kph ) |
Operating Voltage | 12.0 volts |
Operating Weight | 9,226.4 lbs ( 4,185 kg ) |
Rated Operating Capacities - 35% Tipping Load | 2,065.0 lbs ( 937 kg ) |
Rated Operating Capacities - 50% Tipping Load | 2,950.0 lbs ( 1,338 kg ) |
Rated Operating Capacity with Optional Counterweight | 3,000.0 lbs ( 1,361 kg ) |
Tipping Load | 5,900.0 lbs ( 2,676 kg ) |
Power Train | |
Travel Speed Forward | 5.9 mph ( 10 kph ) |
Travel Speed Forward - 2-Speed | 8.5 mph ( 14 kph ) |
Travel Speed Reverse | 5.9 mph ( 10 kph ) |
Travel Speed Reverse - 2-Speed | 8.5 mph ( 14 kph ) |
Service Refill Capacities | |
Cooling System | 2.6 gal ( 10 l ) |
Engine Crankcase | 2.4 gal ( 9 l ) |
Fuel Tank | 22.2 gal ( 84 l ) |
Hydraulic System | 14.5 gal ( 55 l ) |
Hydraulic Tank | 9.2 gal ( 35 l ) |
Undercarriage | |
Ground Contact Area | 1,848.0 cu in ( 30,283 cu cm ) |
Ground Pressure | 5.0 psi |
Length of Track on Ground | 5.0 ft ( 2 m ) |
Width of Track | 15.8 in ( 40 cm ) |
Weights | |
Operating Weight | 8,934.0 lbs ( 4,052 kg ) |