Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: Call for Price
Hours: | 2121 |
Serial Number: | HMT00688 |
Machine Location: | MILFORD, MA |
More Information: | https://catused.com/cu/10061237 |
Supplied by HeavyEquipmentData.com →
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.5 in ( 19 cm ) |
Bucket Pin Height - Maximum Lift | 10.5 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 15.4 in ( 39 cm ) |
Clearance at Maximum Lift and Dump | 94.0 in ( 239 cm ) |
Departure Angle | 38 deg |
Ground Clearance | 0.8 ft ( 0 m ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - Track on Ground | 71.1 in ( 181 cm ) |
Length - With Bucket on Ground | 146.2 in ( 371 cm ) |
Length - Without Bucket | 117.9 in ( 299 cm ) |
Maximum Dump Angle | 51 deg |
Maximum Overall Height | 158.1 in ( 402 cm ) |
Maximum Reach - With Arms Parallel to Ground | 50.9 in ( 129 cm ) |
Overall Length - Track | 90.0 in ( 229 cm ) |
Rack Back Angle - Maximum Height | 84 deg |
Reach - Maximum Lift/Dump | 30.8 in ( 78 cm ) |
Turning Radius from Center - Bucket | 92.0 in ( 234 cm ) |
Turning Radius from Center - Coupler | 58.8 in ( 149 cm ) |
Turning Radius from Center - Machine Rear | 67.4 in ( 171 cm ) |
Vehicle Width | 78.0 in ( 198 cm ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power - SAE J1995 | 74.3 hp ( 55 kw ) |
Net Power | 72.9 hp ( 54 kw ) |
Net Power - ISO 9249 | 73.7 hp ( 55 kw ) |
Net Power - SAE 1349 | 72.9 hp ( 54 kw ) |
Peak Torque - 1,500 rpm - SAE J1995 | 195.0 ft ( 59 m ) |
Stroke | 4.7 in ( 12 cm ) |
General Specifications | |
Category | Compact Track Loaders |
ENGINE POWER HP (KW) | 73 (54) |
MODEL | 287D |
OPERATING LOAD LBS. (KG) | 4,000 (1,814) |
OPERATING WIDTH IN. (CM) | 78 (198) |
Hydraulic System | |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76.0 hp ( 57 kw ) |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32.0 gpm ( 121 lpm ) |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4,061.0 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44.0 hp ( 33 kw ) |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23.0 gpm ( 87 lpm ) |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335.0 psi |
Loader | |
Operating Load Rating | 2,800.0 lbs ( 1,270 kg ) |
Operating Width | 78.0 in ( 198 cm ) |
Noise Level | |
Inside Cab* | 81 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 103 dB(A) |
Operating Specifications | |
Breakout Force - Tilt Cylinder | 7,291.0 lbs ( 3,307 kg ) |
Ground Contact Area | 2,561.0 cu in ( 41,967 cu cm ) |
Ground Pressure | 3.9 psi |
Rated Operating Capacities - 35% Tipping Load | 2,800.0 lbs ( 1,270 kg ) |
Rated Operating Capacities - 50% Tipping Load | 4,000.0 lbs ( 1,814 kg ) |
Rated Operating Capacity with Optional Counterweight | 4,250.0 lbs ( 1,928 kg ) |
Tipping Load | 8,000.0 lbs ( 3,629 kg ) |
Power Train | |
Travel Speed - Forward or Reverse - One Speed | 5.2 mph ( 8 kph ) |
Travel Speed - Forward or Reverse - Two Speed | 8.0 mph ( 13 kph ) |
Service Refill Capacities | |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 3.0 gal ( 11 l ) |
Fuel Tank | 24.8 gal ( 94 l ) |
Hydraulic System | 13.7 gal ( 52 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |