Equipment ↠ Caterpillar ↠ Compact Track Loaders ↠ THIS Caterpillar 289C

Caterpillar 289C For Sale in Omaha, NE

Name: Caterpillar 289C
Brand: Caterpillar
Availability: InStock

❮

❯

For Sale: Call for Price

NMC CAT

NMC CAT Dealer Info

NMC CAT Website

Click here to email NMC CAT.

Contact: NMC Sales

Click for Phone Number

Machine Info:

Hours:	4553
Serial Number:	JMP00940
Machine Location:	OMAHA, NE
More Information:	https://catused.com/cu/10108648

Description:

2 Speed Travel, 289C COMPACT TRACK LOADER, Air Conditioner, Auxiliary Hydraulics Flow, BELT SEAT 2", CAROLINA CDC - - AVAILABILITY, Conversion Arrangement, Coupler Type - Hydraulic, DOOR CAB GLASS, ENGINE TIER 3 COMPLIANT, Hand and Foot Control, HEATER ENGINE COOLANT 120V, Heater / Defroster, HYDRAULICS PROPORTIONAL, HYDRAULICS STANDARD FLOW, INSTRUCTIONS ANSI NACD, INSTRUCTIONS ENGLISH, LANE 1 ORDER, Lighting, Online Owner's Manual , PACKAGE PERFORMANCE (TL2), QUICK COUPLER HYDRAULIC, Radio - AM FM Radio, ROPS ENCLOSED WITH A/C (C3), SEAT COMFORT AIR SUSPENSION, Self Leveling

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
S.O.S. Taken	No
SAFETY ITEMS
ROPS	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Back Up Alarm	Yes
Current O&MM	Yes
Current Parts Manual	Yes
Current Safety Manual	Yes
ROPS Certification Plate	Yes
ENGINE
Blow By	Yes
Compression in Radiator	No
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	Yes
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
Ether Aid	No
TANDEMS/GEARS/BEARINGS/CHAINS
Front Torsion Bars	Good
Lines / Linkages	Good
Operating Condition	Good
Rear Torsion Bars	Good
Torsion Axles	Good
Travel Controls	Good
Travel Motors	Good
Travel Pumps	Good
HYDRAULICS
Leaks - HYDRAULICS	No
BUCKET
Bucket Linkage	Good
Loader Frame	Good
Loader Pins & Bushings	Fair
Quick Coupler	Good
UNDERCARRIAGE
Leaks - HYDRAULICS	24/32
Leaks - HYDRAULICS	18"

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Cab
FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position	7.7 in ( 20 cm )
Bucket Pin Height - Maximum Lift	10.7 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	14.6 in ( 37 cm )
Clearance at Max Lift and Dump	8.1 ft ( 2 m )
Clearance at Maximum Lift and Dump	96.7 in ( 246 cm )
Departure Angle	44 deg
Ground Clearance	9.1 in ( 23 cm )
Height - Top of Cab	7.0 ft ( 2 m )
Length - Track on Ground	69.6 in ( 177 cm )
Length - with Bucket	12.1 ft ( 4 m )
Length - With Bucket on Ground	144.8 in ( 368 cm )
Maximum Dump Angle	50 deg
Maximum Overall Height	160.7 in ( 408 cm )
Maximum Reach - With Arms Parallel	50.5 in ( 128 cm )
Overall Length - Track	89.4 in ( 227 cm )
Rack Back Angle - Maximum Height	85 deg
Reach at Max Lift and Dump	2.6 ft ( 1 m )
Reach at Maximum Lift/Dump	30.7 in ( 78 cm )
Turn Radius from Center - Bucket	91.1 in ( 231 cm )
Turn Radius from Center - Coupler	57.9 in ( 147 cm )
Turn Radius from Center - Rear	64.6 in ( 164 cm )
Turning Radius from Center - inc bucket	91.2 in ( 232 cm )
Turning Radius from Center - machine rear	64.6 in ( 164 cm )
Vehicle Width	78.0 in ( 198 cm )
Width Over Tracks	6.5 ft ( 2 m )
Engine
Aspiration	Turbocharged
Bore	3.7 in ( 9 cm )
Displacement	201.0 cu in ( 3,294 cu cm )
Engine Model	Cat C3.4T
Gross Power	84.0 hp ( 63 kw )
Gross Power - SAE J1995	84.0 hp ( 63 kw )
Net Power	82.0 hp ( 61 kw )
Net Power - SAE 1349	82.0 hp ( 61 kw )
Number of Cylinders	4.0
Power Measured @	2,500.0 rpm
Stroke	4.7 in ( 12 cm )
Hydraulic System
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.8 hp ( 32 kw )
Loader Hydraulic Flow	22.0 gpm ( 83 lpm )
Loader Hydraulic Pressure	3,335.0 psi
Maximum Loader Hydraulic Flow	33.0 gpm ( 125 lpm )
Maximum Loader Hydraulic Pressure	4,061.0 psi
Pump Flow	22.2 gpm ( 84 lpm )
Relief Valve Pressure	3,335.0 psi
Loader
Breakout Force	7,308.0 lbs ( 3,315 kg )
Bucket Capacity	0.6 cu yd ( 0 cu m )
Operating Load	3,850.0 lbs ( 1,746 kg )
Tipping Angle	7721 deg
Operating Specifications
Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,308.0 lbs ( 3,315 kg )
Cooling System Fluid Capacity	3.7 gal ( 14 l )
Engine Oil Capacity	2.7 gal ( 10 l )
Fuel Capacity	25.9 gal ( 98 l )
Ground Contact Area	2,504.0 cu in ( 41,033 cu cm )
Ground Pressure	4.1 psi
Hydraulic System Fluid Capacity	15.1 gal ( 57 l )
Max Speed - high range	8.5 mph ( 14 kph )
Max Speed - low range	5.1 mph ( 8 kph )
Operating Voltage	12.0 volts
Operating Weight	10,365.0 lbs ( 4,701 kg )
Rated Operating Capacities - 35% Tipping Load	2,695.0 lbs ( 1,222 kg )
Rated Operating Capacities - 50% Tipping Load	3,850.0 lbs ( 1,746 kg )
Rated Operating Capacity with Optional Counterweight	4,101.0 lbs ( 1,860 kg )
Tipping Load	7,721.0 lbs ( 3,502 kg )
Power Train
Travel Speed Forward	5.0 mph ( 8 kph )
Travel Speed Forward - 2-Speed	8.5 mph ( 14 kph )
Travel Speed Reverse	5.0 mph ( 8 kph )
Travel Speed Reverse - 2-Speed	8.5 mph ( 14 kph )
Service Refill Capacities
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	2.6 gal ( 10 l )
Fuel Tank	26.0 gal ( 98 l )
Hydraulic System	15.0 gal ( 57 l )
Hydraulic Tank	11.0 gal ( 42 l )
Undercarriage
Ground Contact Area	2,504.0 cu in ( 41,033 cu cm )
Ground Pressure	4.1 psi
Length of Track on Ground	5.8 ft ( 2 m )
Weights
Operating Weight	10,365.0 lbs ( 4,701 kg )

Dealer Contact Info:

NMC CAT

NMC CAT Dealer Info

NMC CAT Website

Click here to email NMC CAT.

Contact: NMC Sales

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon