Equipment ↠ Caterpillar ↠ Compact Track Loaders ↠ THIS Caterpillar 297C

Caterpillar 297C For Sale in Aurora, CO

Name: Caterpillar 297C
Brand: Caterpillar
Price: 36000 USD
Availability: InStock

❮

❯

For Sale: $36,000.00 USD

Apply for Financing

Wagner Equipment Co.

Wagner Equipment Co. Dealer Info

Wagner Equipment Co. Website

Click here to email Wagner Equipment Co..

Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:	1598
Serial Number:	GCP00570
Machine Location:	AURORA, CO
More Information:	https://catused.com/cu/10128582

Description:

1597 BW 6/4/24, 2007 CATERPILLAR 297C CT LOADER, AS IS / AS RECEIVED, BATTERY 880CCA,12V/90A SYSTEM, BLOCK HEATER, COUNTERWEIGHT,, BUCKET-GP, BOCE 80", DOME LIGHT, TRAVEL ALARM,, ENGINE, TIER II COMPLIANT, ENGINE,C3.4,91HP, TIER 2, GRAB IRONS, SKYLIGHT, FLOOR MAT,, HYDRAULICS, PROPORTIONAL, HYDRAULICS, STANDARD FLOW, LIGHTING,HALOGEN WORK & SIGNAL, Online Owner's Manual , PACKAGE, PERFORMANCE, (M2), PILOT-JOYSTICK CONTROLS, QUICK COUPLER, MANUAL, ROPS, OPEN (C1), SEAT BELT, 2" SUSPENSION,VINYL, SELF LEVELING, STD DISPLAY W/EMS, TRACKS,RIBBER,18"@26MM DEPTH, TRANSPORT TIE DOWNS POINTS

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
S.O.S. Taken	No
SAFETY ITEMS
ROPS	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Back Up Alarm	Yes
Current O&MM	Yes
Current Parts Manual	No
Current Safety Manual	Yes
ROPS Certification Plate	Yes
ENGINE
Blow By	No
Compression in Radiator	No
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
TANDEMS/GEARS/BEARINGS/CHAINS
Front Torsion Bars	Good
Lines / Linkages	Good
Operating Condition	Good
Rear Torsion Bars	Good
Torsion Axles	Good
Travel Controls	Good
Travel Motors	Good
Travel Pumps	Good
HYDRAULICS
Leaks - HYDRAULICS	No
BUCKET
Leaks - HYDRAULICS	.62 cyd
Leaks - HYDRAULICS	Needs grease
UNDERCARRIAGE
Leaks - HYDRAULICS	18” measuring 26 mm depth
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICS	3 May 2024 - 1,597 hours
Leaks - HYDRAULICS	For the age of the machine it’s in good shape. Clean, service and sell as is.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Cab
FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position	7.8 in ( 20 cm )
Bucket Pin Height - Maximum Lift	10.8 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	14.9 in ( 38 cm )
Clearance at Max Lift and Dump	8.2 ft ( 3 m )
Clearance at Maximum Lift and Dump	97.9 in ( 249 cm )
Departure Angle	35 deg
Ground Clearance	8.8 in ( 22 cm )
Height - Top of Cab	7.0 ft ( 2 m )
Length - Track on Ground	71.2 in ( 181 cm )
Length - with Bucket	12.6 ft ( 4 m )
Length - With Bucket on Ground	150.9 in ( 383 cm )
Maximum Dump Angle	51 deg
Maximum Overall Height	162.0 in ( 411 cm )
Maximum Reach - With Arms Parallel	50.1 in ( 127 cm )
Overall Length - Track	90.0 in ( 229 cm )
Rack Back Angle - Maximum Height	83 deg
Reach at Max Lift and Dump	2.6 ft ( 1 m )
Reach at Maximum Lift/Dump	30.2 in ( 77 cm )
Turn Radius from Center - Bucket	91.8 in ( 233 cm )
Turn Radius from Center - Coupler	58.5 in ( 149 cm )
Turn Radius from Center - Rear	69.3 in ( 176 cm )
Turning Radius from Center - inc bucket	91.8 in ( 233 cm )
Turning Radius from Center - machine rear	69.3 in ( 176 cm )
Vehicle Width	78.0 in ( 198 cm )
Width Over Tracks	6.5 ft ( 2 m )
Engine
Bore	3.7 in ( 9 cm )
Displacement	201.0 cu in ( 3,294 cu cm )
Engine Model	Cat C3.4 DIT
Engine Power - ISO 14396	93.0 hp ( 69 kw )
Gross Power	94.0 hp ( 70 kw )
Gross Power - SAE J1995	94.0 hp ( 70 kw )
Net Power	90.0 hp ( 67 kw )
Net Power - EEC 80/1269	91.0 hp ( 68 kw )
Net Power - ISO 9249 EEC	91.0 hp ( 68 kw )
Net Power - SAE 1349	90.0 hp ( 67 kw )
Number of Cylinders	4.0
Power Measured @	2,500.0 rpm
Stroke	4.7 in ( 12 cm )
Hydraulic System
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.8 hp ( 32 kw )
Loader Hydraulic Flow	22.0 gpm ( 83 lpm )
Loader Hydraulic Pressure	3,335.0 psi
Maximum Loader Hydraulic Flow	33.0 gpm ( 125 lpm )
Maximum Loader Hydraulic Pressure	4,061.0 psi
Pump Flow	22.2 gpm ( 84 lpm )
Relief Valve Pressure	3,335.9 psi
Loader
Breakout Force	7,308.0 lbs ( 3,315 kg )
Bucket Capacity	0.6 cu yd ( 0 cu m )
Operating Load	4,561.0 lbs ( 2,069 kg )
Tipping Angle	8585 deg
Operating Specifications
Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,308.0 lbs ( 3,315 kg )
Cooling System Fluid Capacity	3.7 gal ( 14 l )
Engine Oil Capacity	2.7 gal ( 10 l )
Fuel Capacity	25.9 gal ( 98 l )
Ground Contact Area	2,542.0 cu in ( 41,656 cu cm )
Ground Pressure	4.0 psi
Hydraulic System Fluid Capacity	15.1 gal ( 57 l )
Max Speed - high range	9.3 mph ( 15 kph )
Max Speed - low range	5.6 mph ( 9 kph )
Operating Voltage	12.0 volts
Operating Weight	10,139.0 lbs ( 4,599 kg )
Rated Operating Capacities - 35% Tipping Load	3,005.0 lbs ( 1,363 kg )
Rated Operating Capacities - 50% Tipping Load	4,200.0 lbs ( 1,905 kg )
Rated Operating Capacity with Optional Counterweight	4,561.0 lbs ( 2,069 kg )
Tipping Load	8,585.0 lbs ( 3,894 kg )
Power Train
Travel Speed Forward	5.6 mph ( 9 kph )
Travel Speed Forward - 2-Speed Option	9.3 mph ( 15 kph )
Travel Speed Reverse	5.6 mph ( 9 kph )
Travel Speed Reverse - 2-Speed Option	9.3 mph ( 15 kph )
Service Refill Capacities
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	2.6 gal ( 10 l )
Fuel Tank	26.0 gal ( 98 l )
Hydraulic System	15.0 gal ( 57 l )
Hydraulic Tank	11.0 gal ( 42 l )
Undercarriage
Ground Contact Area	2,542.0 cu in ( 41,656 cu cm )
Ground Pressure	4.1 psi
Length of Track on Ground	6.0 ft ( 2 m )
Weights
Operating Weight	10,139.0 lbs ( 4,599 kg )

Dealer Contact Info:

Wagner Equipment Co.

Wagner Equipment Co. Dealer Info

Wagner Equipment Co. Website

Click here to email Wagner Equipment Co..

Contact: Equipment Manager

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon