2018 Caterpillar D6N XL For Sale in Turlock, CA
For Sale: $249,500.00 USD
Apply for Financing
This machine is available to rent.
| Daily | $1000 |
| Weekly | $3000 |
| Monthly | $9000 |
Machine Info:
| Serial Number: | NJN00355 |
| Stock Number: | DD6NXLNJN00355 |
| Machine Location: | TURLOCK, CA |
Description:
EROPS, A/C, 6 WAY DOZER, WIRED FOR TRIMBLE, NEW DIAMOND RIPPER WITH 3 SHANKS. JUST INSTALLED NEW CAT RAILS AND SPROCKETS. REMAINING U/C IS VERY GOOD!, REMAINING POWERTRAIN WARRANTY TILL 04/09/25 OR 2694 HOURS WHICHEVER COMES FIRST, THIS MACHINE IS "WORK READY" -CHECKED THROUGH OUR SHOP WITHIN SERVICE INTERVAL WITH NO LEAKS AND ALL GAUGES,LIGHTS, ETC WORKING PROPERLY
From the manufacturer:
Supplied by HeavyEquipmentData.com →
The latest in the line of Cat D6N dozers combines well-known
versatility with a range of technology features to give you more job
site productivity than ever before. A new transmission with lock-up
clutch torque converter delivers ease of operation, increased net
power, plus a 10-15 percent improvement in fuel efficiency. The D6N
has the weight and horsepower you want for dozing applications and
the balance and stability you need for finish grading – all in one easyto-transport machine.
| Dimensions |
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 23.5 in ( 60 cm ) |
| Ground Clearance | 1.4 ft ( 0 m ) |
| Height - Top of Cab | 10.2 ft ( 3 m ) |
| Length - Track on Ground | 100.4 in ( 255 cm ) |
| Length of Track on Ground | 8.5 ft ( 3 m ) |
| Length w/o Blade | 12.3 ft ( 4 m ) |
| Track Gauge | 6.3 ft ( 2 m ) |
| Width Over Tracks | 8.2 ft ( 3 m ) |
| Engine |
| Bore | 4.4 in ( 11 cm ) |
| Displacement | 439.0 cu in ( 7,194 cu cm ) |
| Engine Model | Cat 3126B DITAAC |
| Flywheel Power | 145.0 hp ( 108 kw ) |
| Make | Cat |
| Net Power - EU 80/1269 | 145.0 hp ( 108 kw ) |
| Net Power - ISO 9249 | 145.0 hp ( 108 kw ) |
| Net Power - SAE J1349 | 143.0 hp ( 107 kw ) |
| Number of Cylinders | 6.0 |
| Power Measured @ | 2,200.0 rpm |
| Stroke | 5.0 in ( 13 cm ) |
| General Specifications |
| ?Model | D6N XL WH (Tier 4F) |
| Category | Crawler Dozers Non LGP |
| Engine Power hp (kW) | 166 (124) |
| Engine Type | C7.1 ACERT |
| Weight lb. (kg) | 40,818 (18,515) |
| Operating Specifications |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 9.3 gal ( 35 l ) |
| Final Drives Fluid Capacity | 1.9 gal ( 7 l ) |
| Fuel Capacity | 79.0 gal ( 299 l ) |
| Hydraulic Fluid Capacity | 7.8 gal ( 30 l ) |
| Operating Voltage | 12.0 volts |
| Ripper |
| Beam Cross Section | 216x254 mm 8.5x10.0 in |
| Number of Pockets | 3.0 |
| Overall Beam Width | 86.7 in ( 220 cm ) |
| Ripper Type | Fixed Parallelogram |
| Weight - Each Additional Shank | 172.0 lbs ( 78 kg ) |
| Service Refill Capacities |
| Cooling System | 10.8 gal ( 41 l ) |
| Final Drive - Each | 1.8 gal ( 7 l ) |
| Fuel Tank | 79.0 gal ( 299 l ) |
| Hydraulic Tank | 7.8 gal ( 30 l ) |
| Standard Blade |
| Capacity | 4.2 cu yd ( 3 cu m ) |
| Height | 49.0 in ( 124 cm ) |
| Width | 10.8 ft ( 3 m ) |
| Transmission |
| 1 Forward | 2.1 mph ( 3 kph ) |
| 1 Reverse | 2.5 mph ( 4 kph ) |
| 2 Forward | 3.6 mph ( 6 kph ) |
| 2 Reverse | 4.3 mph ( 7 kph ) |
| 3 Forward | 6.3 mph ( 10 kph ) |
| 3 Reverse | 7.4 mph ( 12 kph ) |
| Max Speed - Forward | 6.3 mph ( 10 kph ) |
| Max Speed - Reverse | 7.5 mph ( 12 kph ) |
| Number of Forward Gears | 3.0 |
| Number of Reverse Gears | 3.0 |
| Transmission Type | powershift |
| Undercarriage |
| Ground Contact Area | 4,882.0 cu in ( 80,002 cu cm ) |
| Ground Pressure | 7.4 psi |
| Grouser Height | 2.3 in ( 6 cm ) |
| Number of Shoes per Side | 40.0 |
| Number of Track Rollers per Side | 7.0 |
| Standard Shoe Size | 24.1 in ( 61 cm ) |
| Track Gauge | 6.3 ft ( 2 m ) |
| Winch |
| Drum Diameter | 10.0 in ( 25 cm ) |
| Drum Width | 12.4 in ( 32 cm ) |
| Flange Diameter | 19.8 in ( 50 cm ) |
| Oil Capacity | 19.6 gal ( 74 l ) |
| Weight | 2,814.0 lbs ( 1,276 kg ) |
| Winch and Bracket Length | 45.1 in ( 115 cm ) |
| Winch Case - Width | 38.4 in ( 98 cm ) |
