List Your Equipment For Free  /  Seller Login

Caterpillar 140G For Sale in Fargo, ND



For Sale: $87,750.00 USD

Apply for Financing

Machine Info:

Hours:8220
Serial Number:5MD03222
Machine Location:FARGO, ND
More Information:https://catused.com/cu/10165539

Description:

14' BLADE W/SS & TIP, 1995 CAT 140G, Air Dryer, CAMSO TLH732 @60%, DIFF LOCK, ENG COOLANT HEATER, HERCULES H-DR220 @70%, LOW TEMP START, Online Owner's Manual , REBUILT TRANS @ 6,713 HOURS, ROPS HP CAB W/AC AND HEATER, VHP

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)Yes
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
ROPS Certification PlateNo
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Safety Decals LegibleN/A
Safety Decals LegibleN/A
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksYes
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
Signal LightsYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Articulate P & BFair
King PinsGood
Steering CylinderFair
Steering LinkageGood
Tie Rods / Rod EndsPoor
Wheel Lean Cylinder - STEERINGGood
BRAKE
AccumulatorsGood
Brake LinkageGood
CompressorGood
LinesGood
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSYes
BLADE
Circle A FrameGood
Face / MoldboardGood
TIRES
Leaks - HYDRAULICS65
Leaks - HYDRAULICS14.00R24
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICSA/C does not blow cold. Steering cylinders have minor leakage. Engine has 2 minor oil leaks. Horn does not work. Cab and machine need cleaned


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Diameter60.3 in  ( 153 cm )
Max Lift Above Ground18.3 in  ( 46 cm )
Max Reach Outside Tires - Left77.2 in  ( 196 cm )
Max Reach Outside Tires - Right72.1 in  ( 183 cm )
Rotation360 deg
Shift Left25.6 in  ( 65 cm )
Shift Right20.5 in  ( 52 cm )
Dimensions
Blade Base8.5 ft  ( 3 m )
Height to Top of Isomount Cab11.1 ft  ( 3 m )
Overall Length27.3 ft  ( 8 m )
Tandem Axle Wheelbase5.0 ft  ( 2 m )
Wheelbase19.5 ft  ( 6 m )
Width Over Tires8.1 ft  ( 2 m )
Engine
Displacement638.0 cu in  ( 10,455 cu cm )
Max Power150.0 hp  ( 112 kw )
Net Power Gear 5-6150.0 hp  ( 112 kw )
Number of Cylinders6.0
Front Axle
Ground Clearance2.1 ft  ( 1 m )
Oscillation - Total32 deg
Wheel Lean18 deg
Hydraulic System
Pump Flow51.0 gpm  ( 193 lpm )
Pump Typeclosed-centre constant-presure system w/ variable displacement piston pump
Relief Valve Pressure2,150.0 psi
Moldboard
Max Depth of Cut17.3 in  ( 44 cm )
Moldboard Height24.1 in  ( 61 cm )
Moldboard Thickness0.9 in  ( 2 cm )
Moldboard Width12.1 ft  ( 4 m )
Side Shift Left26.0 in  ( 66 cm )
Side Shift Right26.0 in  ( 66 cm )
Operating Specifications
Alternator Supplied Amperage40 amps
Cooling System Fluid Capacity12.5 gal  ( 47 l )
Fuel Capacity75.1 gal  ( 284 l )
Hydraulic System Fluid Capacity18.0 gal  ( 68 l )
Oil System Fluid Capacity7.8 gal  ( 30 l )
Operating Voltage24.0 volts
Std Operation Weight - Total27,822.4 lbs  ( 12,620 kg )
Tire Size14x24 10PR
Steering System
Articulation Angle50 deg
Turning Radius24.0 ft  ( 7 m )
Transmission
Max Speed - Forward25.5 mph  ( 41 kph )
Max Speed - Reverse25.5 mph  ( 41 kph )
Number of Gears - Forward6.0
Number of Gears - Reverse6.0
Transmission Typedirect drive power shift

Dealer Contact Info:

Butler Machinery

Fax: 701-298-1810



Contact: Bill Bauer

Click for Phone Number


veritread button





39.95234 \\ -75.16379 \\ Fort Washington \\ PA