Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $280,000.00 USD
Apply for FinancingSerial Number: | TFB736 |
Machine Location: | GRAND PRAIRIE, TX |
Supplied by HeavyEquipmentData.com →
Body Capacities | |
Heaped (SAE 2:1) | 19.6 cu yd ( 15 cu m ) |
Struck | 14.4 cu yd ( 11 cu m ) |
Tailgate Heaped SAE 2:1 | 20.4 cu yd ( 16 cu m ) |
Tailgate Struck | 14.5 cu yd ( 11 cu m ) |
Body Hoist | |
Lower Time | 8.0 seconds |
Raise Time | 10.0 seconds |
Body Plate | |
Body Plate Type | High Strength Brinell HB450 Wear Resistant Steel |
Dump | |
Capacity - Heaped | 20.4 cu yd ( 16 cu m ) |
Capacity - Struck | 14.4 cu yd ( 11 cu m ) |
Dump Angle | 45 deg |
Lower Time | 8.0 seconds |
Raise Time | 10.0 seconds |
Engine | |
Bore | 4.6 in ( 12 cm ) |
Displacement | 567.0 cu in ( 9,291 cu cm ) |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C9.3 ACERT |
Gross Power | 320.0 hp ( 239 kw ) |
Gross Power - SAE J1995 | 320.0 hp ( 239 kw ) |
Max Torque | 1,263.0 lbs ft ( 1,712 nm ) |
Net Power | 314.0 hp ( 234 kw ) |
Net Power - ISO 14396 | 316.0 hp ( 236 kw ) |
Net Power - SAE J1349 | 314.0 hp ( 234 kw ) |
No Engine De-rating Required Below | 8,400.0 ft ( 2,560 m ) |
Peak Engine Torque Gross (SAE J1995) | 1,275.0 lbs ft ( 1,729 nm ) |
Peak Engine Torque Net (ISO 14396) | 1,263.0 lbs ft ( 1,712 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
Stroke | 5.9 in ( 15 cm ) |
Torque Measured @ | 1,200.0 rpm |
Operating Specifications | |
Cooling System Fluid Capacity | 5.8 gal ( 22 l ) |
Engine Oil Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 28.6 gal ( 108 l ) |
Hydraulic System Fluid Capacity | 7.7 gal ( 29 l ) |
Transmission Fluid Capacity | 3.3 gal ( 12 l ) |
Operating Weights | |
Center Axle - Empty | 10,030.0 lbs ( 4,550 kg ) |
Center Axle - Loaded | 33,333.0 lbs ( 15,120 kg ) |
Center Axle - Rated Load | 23,303.0 lbs ( 10,570 kg ) |
Front Axle - Empty | 31,813.0 lbs ( 14,430 kg ) |
Front Axle - Loaded | 37,236.0 lbs ( 16,890 kg ) |
Front Axle - Rated Load | 5,423.0 lbs ( 2,460 kg ) |
Rear Axle - Empty | 9,348.0 lbs ( 4,240 kg ) |
Rear Axle - Loaded | 32,651.0 lbs ( 14,810 kg ) |
Rear Axle - Rated Load | 23,303.0 lbs ( 10,570 kg ) |
Total - Empty | 51,191.0 lbs ( 23,220 kg ) |
Total - Loaded | 103,220.0 lbs ( 46,820 kg ) |
Total - Rated Load | 52,029.0 lbs ( 23,600 kg ) |
Service Refill Capacities | |
Cooling System | 21.9 gal ( 83 l ) |
DEF Tank (ISO 2224-1) | 5.3 gal ( 20 l ) |
Engine Crankcase | 10.0 gal ( 38 l ) |
Final Drives/Differential | 35.7 gal ( 135 l ) |
Fuel Tank | 108.8 gal ( 412 l ) |
Hydraulic System | 29.1 gal ( 110 l ) |
Output Transfer Gear Box | 6.3 gal ( 24 l ) |
Transmission | 12.4 gal ( 47 l ) |
Sound Levels | |
Interior Cab | 76 dB(A) |
Standards | |
Brakes | ISO 3450 - 2011 |
Cab - FOPS | ISO 3449 Level II - 2005 |
Cab - ROPS | ISO 3471 - 2008 |
Steering | ISO 5010 - 2007 |
Steering System | |
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 5.0 mph ( 8 kph ) |
Forward - 2 | 9.0 mph ( 14 kph ) |
Forward - 3 | 14.0 mph ( 23 kph ) |
Forward - 4 | 21.0 mph ( 34 kph ) |
Forward - 5 | 30.0 mph ( 48 kph ) |
Forward - 6 | 35.0 mph ( 56 kph ) |
Number of Forward Gears | 6.0 |
Number of Reverse Gears | 1.0 |
Reverse - 1 | 6.0 mph ( 10 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 210.0 in ( 533 cm ) |
Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
Turning Dimensions - Inside Radius | 153.0 in ( 389 cm ) |
Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
Turning Dimensions - Steer Angle - Left/Right | 45 deg |
Weights | |
Center Axle - empty | 10,030.0 lbs ( 4,550 kg ) |
Center Axle - loaded | 23,303.0 lbs ( 10,570 kg ) |
Front Axle - empty | 31,813.0 lbs ( 14,430 kg ) |
Front Axle - loaded | 5,423.0 lbs ( 2,460 kg ) |
Rear Axle - empty | 9,348.0 lbs ( 4,240 kg ) |
Rear Axle - loaded | 23,303.0 lbs ( 10,570 kg ) |
Total Empty | 51,191.0 lbs ( 23,220 kg ) |
Total Loaded | 103,220.0 lbs ( 46,820 kg ) |