Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS Caterpillar 725C 2

Caterpillar 725C 2 For Sale in Casper, WY

Name: Caterpillar 725C 2
Brand: Caterpillar
Price: 387500 USD
Availability: InStock

❮

❯

For Sale: $387,500.00 USD

Apply for Financing

Wyoming Machinery Company

Wyoming Machinery Company Dealer Info

Wyoming Machinery Company Website

Click here to email Wyoming Machinery Company.

Click for Phone Number

Machine Info:

Hours:	8376
Serial Number:	2T300522
Machine Location:	CASPER, WY
More Information:	https://catused.com/cu/10039552

Description:

4 HYDRAULIC SPRAY HEADS, AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BERKELEY 5X4 HYD PUMP, BODY, STANDARD, CHASSIS, STANDARD, CMPD SOFTWARE, EXHAUST, STANDARD, FILM GROUP, ANSI, HAMILTON 5000 GALLON WATER TANK, LIGHTS, ROOF MOUNTED WORK, LUBRICATION, AUTOMATIC, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO TAILGATE, Online Owner's Manual , PRODUCT LINK, SATELLITE PL631, SEAT, STANDARD, TANK, STANDARD FUEL, TIRES, 23.5R25 MX ** XADN+ E-3, WIPER, REAR

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Body Capacities
Heaped (SAE 2:1)	19.6 cu yd ( 15 cu m )
Struck	14.4 cu yd ( 11 cu m )
Tailgate Heaped SAE 2:1	20.4 cu yd ( 16 cu m )
Tailgate Struck	14.5 cu yd ( 11 cu m )
Body Hoist
Lower Time	8.0 seconds
Raise Time	10.0 seconds
Body Plate
Body Plate Type	High strength Brinell HB450 wear resistant steel
Engine
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV	Cat C9.3 ACERT
Gross Power - SAE J1995	320.0 hp ( 239 kw )
Net Power - ISO 14396	316.0 hp ( 236 kw )
Net Power - SAE J1349	314.0 hp ( 234 kw )
No Engine De-rating Required Below	7,500.0 ft ( 2,286 m )
Peak Engine Torque Gross (SAE J1995)	1,275.0 lbs ft ( 1,729 nm )
Peak Engine Torque Net (ISO 14396)	1,262.0 lbs ft ( 1,711 nm )
Peak Engine Torque Net (SAE J1349)	1,262.0 lbs ft ( 1,711 nm )
Peak Engine Torque Speed	1,200.0 rpm
General Specifications
Articulated/Rigid	A
Category	Trucks
Drive Configuration	6WD
Engine Type	Cat C9.3 ACERT
Mfg. Model	725C2
Operating Weight Pounds (Kgs)	50,795 (23,040)
Planetary Powershift Transmission	Powershift w/ lockup torque converter
Rated Payload Tons (Metric Tons)	26.5 (24)
Operating Weights
Center Axle - Empty	9,755.0 lbs ( 4,425 kg )
Center Axle - Loaded	33,455.0 lbs ( 15,175 kg )
Center Axle - Rated Load	23,700.0 lbs ( 10,750 kg )
Front Axle - Empty	31,835.0 lbs ( 14,440 kg )
Front Axle - Loaded	37,374.0 lbs ( 16,953 kg )
Front Axle - Rated Load	5,512.0 lbs ( 2,500 kg )
Rear Axle - Empty	9,205.0 lbs ( 4,175 kg )
Rear Axle - Loaded	32,905.0 lbs ( 14,925 kg )
Rear Axle - Rated Load	23,700.0 lbs ( 10,750 kg )
Total - Empty	50,795.0 lbs ( 23,040 kg )
Total - Loaded	103,707.0 lbs ( 47,041 kg )
Total - Rated Load	52,912.0 lbs ( 24,001 kg )
Service Refill Capacities
Cooling System	21.9 gal ( 83 l )
DEF Tank	5.3 gal ( 20 l )
DEF Tank (ISO 2224-1)	5.2 gal ( 20 l )
Engine Crankcase	10.0 gal ( 38 l )
Final Drives/Differential	33.0 gal ( 125 l )
Fuel Tank	108.8 gal ( 412 l )
Hydraulic System	29.1 gal ( 110 l )
Output Transfer Gear Box	6.3 gal ( 24 l )
Transmission	12.4 gal ( 47 l )
Sound Levels
Interior Cab	76 dB(A)
Steering System
Lock to Lock	4.75 seconds @ 60 rpm
Transmission
Forward - 1	5.0 mph ( 8 kph )
Forward - 2	9.0 mph ( 14 kph )
Forward - 3	14.0 mph ( 23 kph )
Forward - 4	21.0 mph ( 34 kph )
Forward - 5	29.0 mph ( 47 kph )
Forward - 6	36.0 mph ( 58 kph )
Reverse - 1	6.0 mph ( 10 kph )
Turning Circle
Turning Dimensions - Aisle Width	210.0 in ( 533 cm )
Turning Dimensions - Clearance Radius	318.0 in ( 808 cm )
Turning Dimensions - Inside Radius	153.0 in ( 389 cm )
Turning Dimensions - SAE Turning Radius	294.0 in ( 747 cm )
Turning Dimensions - Steer Angle - Left/Right	45 deg
Wheel Base Length
Long Wheel Base	215.2 in ( 547 cm )
Standard Wheel Base	156.7 in ( 398 cm )

Dealer Contact Info:

Wyoming Machinery Company

Wyoming Machinery Company Dealer Info

Wyoming Machinery Company Website

Click here to email Wyoming Machinery Company.

Fax: 307-261-4486

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon