List Your Equipment For Free  /  Seller Login
This machine has been sold or is not currently for sale.

2004 Caterpillar 730



MACHINE SOLD



Machine Info:

Serial Number:CEG-AGF01019
Stock Number:11-8837
Machine Location:SOUTH MILLS, NC

Description:

Enclosed cab with heat and cold air conditioning, The pre-emission (no DEF) starts easily and burns clean exhaust. The transmission shifts through all gears in both forward and reverse directions. The brakes are good, and the park brake holds. The steering and center joint are tight. Original factory paint with some damage. Inside the cab is clean with all controls functioning properly. 4 good tires 2 weak tires.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Articulating/Rigid
Articulating/Rigid Articulated
Body Capacities
Heaped (SAE 2:1)23.0 cu yd  ( 18 cu m )
Struck17.4 cu yd  ( 13 cu m )
Tailgate Heaped SAE 2:124.6 cu yd  ( 19 cu m )
Tailgate Struck18.2 cu yd  ( 14 cu m )
Body Hoist
Lower Time8.0 seconds
Raise Time12.0 seconds
Body Plate
Body Plate TypeHigh strength Brinell HB450 wear resistant steel
Body Plate Thickness
Base0.6 in  ( 2 cm )
Front0.4 in  ( 1 cm )
Scow0.6 in  ( 2 cm )
Side0.5 in  ( 1 cm )
Dimensions
Dump Ground Clearance1.9 ft  ( 1 m )
Dump Height21.4 ft  ( 7 m )
Ground Clearance1.7 ft  ( 1 m )
Overall Height11.3 ft  ( 3 m )
Overall Length32.6 ft  ( 10 m )
Overall Width9.5 ft  ( 3 m )
Wheelbase15.4 ft  ( 5 m )
DRIVE SYSTEM
Drive Config 6x6
Dump
Capacity - Heaped22.2 cu yd  ( 17 cu m )
Capacity - Struck17.2 cu yd  ( 13 cu m )
Lower Time12.0 seconds
Raise Time12.0 seconds
Rated Payload61,949.9 lbs  ( 28,100 kg )
Engine
AspirationTurbochaarged
Bore5.1 in  ( 13 cm )
Displacement762.8 cu in  ( 12,500 cu cm )
Engine ModelCat C13 ACERT
Engine Model - U.S. EPA Tier 4 Final/EU Stage IVCat C13 ACERT
Gross Power329.0 hp  ( 245 kw )
Gross Power - SAE J1995375.0 hp  ( 280 kw )
MakeCat
Model3196C ATAAC
Net Power325.0 hp  ( 242 kw )
Net Power - EEC 80/1269321.0 hp  ( 239 kw )
Net Power - ISO 14396370.0 hp  ( 276 kw )
Net Power - ISO 9249321.0 hp  ( 239 kw )
Net Power - SAE J1349367.0 hp  ( 274 kw )
Number of Cylinders6.0
Peak Engine Torque Gross (SAE J1995)1,579.0 lbs ft  ( 2,141 nm )
Peak Engine Torque Net (SAE J1349)1,564.0 lbs ft  ( 2,120 nm )
Peak Engine Torque Speed1,200.0 rpm
Stroke6.2 in  ( 16 cm )
Operating Specifications
Cooling System Fluid Capacity22.5 gal  ( 85 l )
Engine Oil Capacity9.8 gal  ( 37 l )
Fuel Capacity95.2 gal  ( 360 l )
Hydraulic System Fluid Capacity27.0 gal  ( 102 l )
Tire Size23.5R25
Transmission Fluid Capacity9.6 gal  ( 36 l )
Operating Weights
Center Axle - Empty10,053.0 lbs  ( 4,560 kg )
Center Axle - Loaded37,302.0 lbs  ( 16,920 kg )
Center Axle - Rated Load27,249.0 lbs  ( 12,360 kg )
Front Axle - Empty33,069.0 lbs  ( 15,000 kg )
Front Axle - Loaded40,300.0 lbs  ( 18,280 kg )
Front Axle - Rated Load7,231.0 lbs  ( 3,280 kg )
Rear Axle - Empty9,568.0 lbs  ( 4,340 kg )
Rear Axle - Loaded36,817.0 lbs  ( 16,700 kg )
Rear Axle - Rated Load27,249.0 lbs  ( 12,360 kg )
Total - Empty52,690.0 lbs  ( 23,900 kg )
Total - Loaded114,420.0 lbs  ( 51,900 kg )
Total - Rated Load61,729.0 lbs  ( 28,000 kg )
Service Refill Capacities
Cooling System21.9 gal  ( 83 l )
DEF Tank5.3 gal  ( 20 l )
Engine Crankcase10.0 gal  ( 38 l )
Final Drives/Differential33.0 gal  ( 125 l )
Fuel Tank108.8 gal  ( 412 l )
Hydraulic System29.1 gal  ( 110 l )
Output Transfer Gear Box6.3 gal  ( 24 l )
Transmission12.4 gal  ( 47 l )
Sound Levels
Interior Cab72 dB(A)
Standards
BrakesISO 3450 2011
Cab - FOPSISO 3449 Level II 2005
Cab - ROPSISO 3471 2008
SteeringISO 5010 2007
Steering System
Lock to Lock4.75 seconds @ 60 rpm
Transmission
Forward - 15.0 mph  ( 8 kph )
Forward - 29.0 mph  ( 14 kph )
Forward - 314.0 mph  ( 23 kph )
Forward - 421.0 mph  ( 34 kph )
Forward - 529.0 mph  ( 47 kph )
Forward - 634.0 mph  ( 55 kph )
Max Speed34.4 mph  ( 55 kph )
Number of Forward Gears6.0
Number of Reverse Gears1.0
Reverse - 16.0 mph  ( 10 kph )
Turning Circle
Turning Dimensions - Aisle Width210.0 in  ( 533 cm )
Turning Dimensions - Clearance Radius318.0 in  ( 808 cm )
Turning Dimensions - Inside Radius153.0 in  ( 389 cm )
Turning Dimensions - SAE Turning Radius294.0 in  ( 747 cm )
Weights
Center Axle - empty11,023.2 lbs  ( 5,000 kg )
Center Axle - loaded39,021.9 lbs  ( 17,700 kg )
Front Axle - empty28,968.8 lbs  ( 13,140 kg )
Front Axle - loaded34,965.4 lbs  ( 15,860 kg )
Operating Weight 109,600.0 lbs  ( 49,714 kg )
Rear Axle - empty10,383.8 lbs  ( 4,710 kg )
Rear Axle - loaded38,382.5 lbs  ( 17,410 kg )
Total Empty50,375.7 lbs  ( 22,850 kg )
Total Loaded112,369.7 lbs  ( 50,970 kg )

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)




Contact: Davis Mellott

Click for Phone Number


veritread button





39.95234 \\ -75.16379 \\ Fort Washington \\ PA