| Articulating/Rigid |
| Articulating/Rigid | Articulated |
| Body Capacities |
| Heaped (SAE 2:1) | 23.0 cu yd ( 18 cu m ) |
| Struck | 17.4 cu yd ( 13 cu m ) |
| Tailgate Heaped SAE 2:1 | 24.6 cu yd ( 19 cu m ) |
| Tailgate Struck | 18.2 cu yd ( 14 cu m ) |
| Body Hoist |
| Lower Time | 8.0 seconds |
| Raise Time | 12.0 seconds |
| Body Plate |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
| Base | 0.6 in ( 2 cm ) |
| Front | 0.4 in ( 1 cm ) |
| Scow | 0.6 in ( 2 cm ) |
| Side | 0.5 in ( 1 cm ) |
| Dimensions |
| Dump Ground Clearance | 1.9 ft ( 1 m ) |
| Dump Height | 21.4 ft ( 7 m ) |
| Ground Clearance | 1.7 ft ( 1 m ) |
| Overall Height | 11.3 ft ( 3 m ) |
| Overall Length | 32.6 ft ( 10 m ) |
| Overall Width | 9.5 ft ( 3 m ) |
| Wheelbase | 15.4 ft ( 5 m ) |
| DRIVE SYSTEM |
| Drive Config | 6x6 |
| Dump |
| Capacity - Heaped | 22.2 cu yd ( 17 cu m ) |
| Capacity - Struck | 17.2 cu yd ( 13 cu m ) |
| Lower Time | 12.0 seconds |
| Raise Time | 12.0 seconds |
| Rated Payload | 61,949.9 lbs ( 28,100 kg ) |
| Engine |
| Aspiration | Turbochaarged |
| Bore | 5.1 in ( 13 cm ) |
| Displacement | 762.8 cu in ( 12,500 cu cm ) |
| Engine Model | Cat C13 ACERT |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
| Gross Power | 329.0 hp ( 245 kw ) |
| Gross Power - SAE J1995 | 375.0 hp ( 280 kw ) |
| Make | Cat |
| Model | 3196C ATAAC |
| Net Power | 325.0 hp ( 242 kw ) |
| Net Power - EEC 80/1269 | 321.0 hp ( 239 kw ) |
| Net Power - ISO 14396 | 370.0 hp ( 276 kw ) |
| Net Power - ISO 9249 | 321.0 hp ( 239 kw ) |
| Net Power - SAE J1349 | 367.0 hp ( 274 kw ) |
| Number of Cylinders | 6.0 |
| Peak Engine Torque Gross (SAE J1995) | 1,579.0 lbs ft ( 2,141 nm ) |
| Peak Engine Torque Net (SAE J1349) | 1,564.0 lbs ft ( 2,120 nm ) |
| Peak Engine Torque Speed | 1,200.0 rpm |
| Stroke | 6.2 in ( 16 cm ) |
| General Specifications |
| Articulated/Rigid | A |
| Category | Trucks |
| Drive Configuration | 6WD |
| Engine Type | Cat C13 |
| Mfg. Model | 730.0 |
| Operating Weight Pounds (Kgs) | 52,690 (23,900) |
| Planetary Powershift Transmission | Powershift w/ lockup torque converter |
| Rated Payload Tons (Metric Tons) | 31 (28) |
| Operating Specifications |
| Cooling System Fluid Capacity | 22.5 gal ( 85 l ) |
| Engine Oil Capacity | 9.8 gal ( 37 l ) |
| Fuel Capacity | 95.2 gal ( 360 l ) |
| Hydraulic System Fluid Capacity | 27.0 gal ( 102 l ) |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 9.6 gal ( 36 l ) |
| Operating Weights |
| Center Axle - Empty | 10,053.0 lbs ( 4,560 kg ) |
| Center Axle - Loaded | 37,302.0 lbs ( 16,920 kg ) |
| Center Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
| Front Axle - Empty | 33,069.0 lbs ( 15,000 kg ) |
| Front Axle - Loaded | 40,300.0 lbs ( 18,280 kg ) |
| Front Axle - Rated Load | 7,231.0 lbs ( 3,280 kg ) |
| Rear Axle - Empty | 9,568.0 lbs ( 4,340 kg ) |
| Rear Axle - Loaded | 36,817.0 lbs ( 16,700 kg ) |
| Rear Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
| Total - Empty | 52,690.0 lbs ( 23,900 kg ) |
| Total - Loaded | 114,420.0 lbs ( 51,900 kg ) |
| Total - Rated Load | 61,729.0 lbs ( 28,000 kg ) |
| Service Refill Capacities |
| Cooling System | 21.9 gal ( 83 l ) |
| DEF Tank | 5.3 gal ( 20 l ) |
| Engine Crankcase | 10.0 gal ( 38 l ) |
| Final Drives/Differential | 33.0 gal ( 125 l ) |
| Fuel Tank | 108.8 gal ( 412 l ) |
| Hydraulic System | 29.1 gal ( 110 l ) |
| Output Transfer Gear Box | 6.3 gal ( 24 l ) |
| Transmission | 12.4 gal ( 47 l ) |
| Sound Levels |
| Interior Cab | 72 dB(A) |
| Standards |
| Brakes | ISO 3450 2011 |
| Cab - FOPS | ISO 3449 Level II 2005 |
| Cab - ROPS | ISO 3471 2008 |
| Steering | ISO 5010 2007 |
| Steering System |
| Lock to Lock | 4.75 seconds @ 60 rpm |
| Transmission |
| Forward - 1 | 5.0 mph ( 8 kph ) |
| Forward - 2 | 9.0 mph ( 14 kph ) |
| Forward - 3 | 14.0 mph ( 23 kph ) |
| Forward - 4 | 21.0 mph ( 34 kph ) |
| Forward - 5 | 29.0 mph ( 47 kph ) |
| Forward - 6 | 34.0 mph ( 55 kph ) |
| Max Speed | 34.4 mph ( 55 kph ) |
| Number of Forward Gears | 6.0 |
| Number of Reverse Gears | 1.0 |
| Reverse - 1 | 6.0 mph ( 10 kph ) |
| Turning Circle |
| Turning Dimensions - Aisle Width | 210.0 in ( 533 cm ) |
| Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
| Turning Dimensions - Inside Radius | 153.0 in ( 389 cm ) |
| Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
| Weights |
| Center Axle - empty | 11,023.2 lbs ( 5,000 kg ) |
| Center Axle - loaded | 39,021.9 lbs ( 17,700 kg ) |
| Front Axle - empty | 28,968.8 lbs ( 13,140 kg ) |
| Front Axle - loaded | 34,965.4 lbs ( 15,860 kg ) |
| Operating Weight | 109,600.0 lbs ( 49,714 kg ) |
| Rear Axle - empty | 10,383.8 lbs ( 4,710 kg ) |
| Rear Axle - loaded | 38,382.5 lbs ( 17,410 kg ) |
| Total Empty | 50,375.7 lbs ( 22,850 kg ) |
| Total Loaded | 112,369.7 lbs ( 50,970 kg ) |
