Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $169,000.00 USD
Apply for FinancingMachine Location: | HOPEDALE, MA |
Supplied by HeavyEquipmentData.com →
Body Capacities | |
Heaped (SAE 2:1) | 23.0 cu yd ( 18 cu m ) |
Struck | 17.4 cu yd ( 13 cu m ) |
Tailgate Heaped SAE 2:1 | 24.6 cu yd ( 19 cu m ) |
Tailgate Struck | 18.2 cu yd ( 14 cu m ) |
Body Hoist | |
Lower Time | 8.0 seconds |
Raise Time | 12.0 seconds |
Body Plate | |
Body Plate Type | High Strength Brinell HB450 Wear Resistant Steel |
Dump | |
Capacity - Heaped | 23.0 cu yd ( 18 cu m ) |
Capacity - Struck | 17.4 cu yd ( 13 cu m ) |
Dump Angle | 45 deg |
Lower Time | 8.0 seconds |
Raise Time | 12.0 seconds |
Rated Payload | 62,000.0 lbs ( 28,123 kg ) |
Engine | |
Bore | 5.2 in ( 13 cm ) |
Displacement | 763.0 cu in ( 12,503 cu cm ) |
Engine Model | Cat C13 |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
Gross Power | 375.0 hp ( 280 kw ) |
Gross Power - SAE J1995 | 375.0 hp ( 280 kw ) |
Max Torque | 1,579.0 lbs ft ( 2,141 nm ) |
Net Power | 367.0 hp ( 274 kw ) |
Net Power - ISO 14396 | 370.0 hp ( 276 kw ) |
Net Power - SAE J1349 | 367.0 hp ( 274 kw ) |
No Engine De-rating Required Below | 12,500.0 ft ( 3,810 m ) |
Peak Engine Torque Gross (SAE J1995) | 1,579.0 lbs ft ( 2,141 nm ) |
Peak Engine Torque Net (ISO 14396) | 1,564.0 lbs ft ( 2,120 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
Stroke | 6.2 in ( 16 cm ) |
Torque Measured @ | 1,200.0 rpm |
Operating Specifications | |
Cooling System Fluid Capacity | 21.9 gal ( 83 l ) |
Fuel Capacity | 108.8 gal ( 412 l ) |
Hydraulic System Fluid Capacity | 29.1 gal ( 110 l ) |
Transmission Fluid Capacity | 9.2 gal ( 35 l ) |
Operating Weights | |
Center Axle - Empty | 10,384.0 lbs ( 4,710 kg ) |
Center Axle - Loaded | 37,633.0 lbs ( 17,070 kg ) |
Center Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
Front Axle - Empty | 33,091.0 lbs ( 15,010 kg ) |
Front Axle - Loaded | 40,322.0 lbs ( 18,290 kg ) |
Front Axle - Rated Load | 7,231.0 lbs ( 3,280 kg ) |
Rear Axle - Empty | 9,656.0 lbs ( 4,380 kg ) |
Rear Axle - Loaded | 36,905.0 lbs ( 16,740 kg ) |
Rear Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
Total - Empty | 53,131.0 lbs ( 24,100 kg ) |
Total - Loaded | 114,860.0 lbs ( 52,100 kg ) |
Total - Rated Load | 61,729.0 lbs ( 28,000 kg ) |
Service Refill Capacities | |
Cooling System | 21.9 gal ( 83 l ) |
DEF Tank (ISO 2224-1) | 5.3 gal ( 20 l ) |
Engine Crankcase | 10.5 gal ( 40 l ) |
Final Drives/Differential | 35.7 gal ( 135 l ) |
Fuel Tank | 108.8 gal ( 412 l ) |
Hydraulic System | 29.1 gal ( 110 l ) |
Output Transfer Gear Box | 6.3 gal ( 24 l ) |
Transmission | 9.2 gal ( 35 l ) |
Sound Levels | |
Interior Cab | 76 dB(A) |
Standards | |
Brakes | ISO 3450 - 2011 |
Cab - FOPS | ISO 3449 Level II - 2005 |
Cab - ROPS | ISO 3471 - 2008 |
Steering | ISO 5010 - 2007 |
Steering System | |
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 5.0 mph ( 8 kph ) |
Forward - 2 | 9.0 mph ( 14 kph ) |
Forward - 3 | 14.0 mph ( 23 kph ) |
Forward - 4 | 21.0 mph ( 34 kph ) |
Forward - 5 | 29.0 mph ( 47 kph ) |
Forward - 6 | 34.0 mph ( 55 kph ) |
Number of Forward Gears | 6.0 |
Number of Reverse Gears | 1.0 |
Reverse - 1 | 6.0 mph ( 10 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 210.0 in ( 533 cm ) |
Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
Turning Dimensions - Inside Radius | 153.0 in ( 389 cm ) |
Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
Turning Dimensions - Steer Angle - Left/Right | 45 deg |
Weights | |
Center Axle - empty | 10,384.0 lbs ( 4,710 kg ) |
Center Axle - loaded | 27,249.0 lbs ( 12,360 kg ) |
Front Axle - empty | 33,091.0 lbs ( 15,010 kg ) |
Front Axle - loaded | 7,231.0 lbs ( 3,280 kg ) |
Rear Axle - empty | 9,656.0 lbs ( 4,380 kg ) |
Rear Axle - loaded | 27,249.0 lbs ( 12,360 kg ) |
Total Empty | 53,131.0 lbs ( 24,100 kg ) |
Total Loaded | 61,729.0 lbs ( 28,000 kg ) |