Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS 2018 Caterpillar 745

2018 Caterpillar 745

Name: 2018 Caterpillar 745
Brand: Caterpillar
Price: 450000 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Stowers Machinery

Stowers Machinery Dealer Info

Stowers Machinery Website

Click here to email Stowers Machinery.

Contact: Todd Jakoby

Click for Phone Number

Machine Info:

Hours:	6247
Serial Number:	3T600725
Machine Location:	KNOXVILLE, TN
More Information:	https://catused.com/cu/10038666

Description:

Air Conditioner, Air Suspension Seat, Auto Lube, Bed Type - Standard, Customer Value Agreement (CVA) 24/1000 CFAS CVA PM FILTER PLAN, Cycle Counter, Emissions Level - EPA - EPA TIER 4f, Emissions Level - Japan - STEP 4 FINAL, Fast Fill Fuel, Lighting, Mirrors, Online Owner's Manual , Product Link, Protection REMAINING USED 48/4000 POWERTRAIN & HYDRAULIC EPP - UNTIL 3/1/2027 OR 9310 HOURS, Radio - Bluetooth, Rear View Camera, Retarder, ROPS - Enclosed, Ultra Low Sulfur Diesel Fuel

Machine Details:

GENERAL APPEARANCE
Cleaning Required	No
Cleaning Required	No
SAFETY ITEMS
ROPS	Yes
ROPS Certification Plate	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
ROPS	Yes
ROPS Certification Plate	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Current O&MM	Yes
Current Parts Manual	Yes
Current Safety Manual	Yes
Current O&MM	Yes
Current Parts Manual	Yes
Current Safety Manual	Yes
ENGINE
Blow By	No
Knocking	No
Oil Leaks	No
Water in Oil	No
Blow By	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
Compression in Radiator	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	No
Ether Aid	No
Block Heater	No
Ether Aid	No
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Hand Metering Unit	Good
Lines / Fittings - STEERING	Good
Steering Cylinder	Good
Steering Linkage	Good
Hand Metering Unit	Good
Lines / Fittings - STEERING	Good
Steering Cylinder	Good
Steering Linkage	Good
SUSPENSION
Suspension Cylinders	Good
Suspension Cylinders	Good
BRAKE
Leaks - BRAKE	No
Leaks - BRAKE	No
HYDRAULICS
Leaks - HYDRAULICS	No
Leaks - HYDRAULICS	No
TRUCK BODY
Bottom	Good
Hinge Pins & Brackets	Good
Operating Condition - TRUCK BODY	Good
Ribs and Stringers	Good
Spill Guard	Good
Bottom	Good
Hinge Pins & Brackets	Good
Operating Condition - TRUCK BODY	Good
Ribs and Stringers	Good
Spill Guard	Good
FINAL DRIVES
Center Axle	Good
Center Final Drives	Good
Front Axle - FINAL DRIVES	Good
Front Final Drives	Good
Rear Axle	Good
Rear Final Drives	Good
Universal Joints	Good
Wheel Lugs & Rims	Good
Center Axle	Good
Center Final Drives	Good
Front Axle - FINAL DRIVES	Good
Front Final Drives	Good
Rear Axle	Good
Rear Final Drives	Good
Universal Joints	Good
Wheel Lugs & Rims	Good
TIRES
Leaks - HYDRAULICS	29.5 R25
Leaks - HYDRAULICS	29.5 R25
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICS	Inspected 8-21-24 @ 5922 HRS.
Leaks - HYDRAULICS	Inspected 8-21-24 @ 5922 HRS.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Cat® 745 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.

BODY CAPACITIES
Heaped (SAE 2:1)	32.7 cu yd ( 25 cu m )
Struck	24.2 cu yd ( 19 cu m )
Tailgate Heaped SAE 2:1	34.7 cu yd ( 27 cu m )
Tailgate Struck	25.5 cu yd ( 20 cu m )
BODY HOIST
Lower (automatic)	10 s
Lower (manual)	10 s
Raise (automatic)	13 s
Raise (manual)	12 s
BODY PLATE
Base	0.6 in ( 1 cm )
Chute	0.6 in ( 1 cm )
Front	0.3 in ( 1 cm )
Side	0.4 in ( 1 cm )
Type	High Strength Brinell HB450 Wear Resistant Steel
ENGINE
Bore	5.7 in ( 14 cm )
Displacement	1,106.0 cu in ( 18,124 cu cm )
Emissions	Meets Tier 4 Final and Stage V standards
Engine Model	Cat C18
Engine Model - Regulations	Cat® C18 (U.S. EPA Tier 4 Final EU Stage V etc.)
Gross Power - SAE J1995	511.0 hp ( 381 kw )
Net Power - ISO 14396	504.0 hp ( 376 kw )
Net Power - SAE J1349	496.0 hp ( 370 kw )
Peak Engine Torque Gross (SAE J1995)	1,931.0 lbs ft ( 2,618 nm )
Peak Engine Torque Net (SAE J1349)	1,887.0 lbs ft ( 2,558 nm )
Peak Engine Torque Speed	1200 r/min
Stroke	7.2 in ( 18 cm )
NOTES ON ENGINE
Note (1)	Power ratings at 1700 rpm
Note (2)	Power at the flywheel with minimum equipment
Note (3)	Net power with fan at max is 348 kW (467 hp)
Note (4)	DEF must meet ISO 22241-1 standard
OPERATING WEIGHTS
Center Axle - Empty	15,309.0 lbs ( 6,944 kg )
Center Axle - Loaded	54,000.0 lbs ( 24,494 kg )
Center Axle - Rated Load	38,691.0 lbs ( 17,550 kg )
Front Axle - Empty	43,515.0 lbs ( 19,738 kg )
Front Axle - Loaded	56,522.0 lbs ( 25,638 kg )
Front Axle - Rated Load	13,007.0 lbs ( 5,900 kg )
Rear Axle - Empty	14,731.0 lbs ( 6,682 kg )
Rear Axle - Loaded	53,422.0 lbs ( 24,232 kg )
Rear Axle - Rated Load	38,691.0 lbs ( 17,550 kg )
Total - Empty	73,553.0 lbs ( 33,363 kg )
Total - Loaded	163,942.0 lbs ( 74,363 kg )
Total - Rated Load	90,390.0 lbs ( 41,000 kg )
SERVICE REFILL CAPACITIES
Axles - Each	15.8 gal ( 60 l )
Brake Cooling Tank	17.7 gal ( 67 l )
Cooling System	23.7 gal ( 90 l )
DEF Tank	5.3 gal ( 20 l )
Engine Crankcase	13.7 gal ( 52 l )
Final Drive - Each	1.3 gal ( 5 l )
Fuel Tank	145.3 gal ( 550 l )
Steering/Hoist Hydraulic System	36.9 gal ( 140 l )
Transmission - OTG	19.8 gal ( 75 l )
SOUND LEVELS
Interior Cab	72 dB(A)
Note (1)	Operator sound exposure Leq is 76 dB(A)
Note (2)	Hearing protection may be needed in certain settings
STANDARDS
Brakes	ISO 3450 – 2011
Cab - FOPS	ISO 3449 Level II – 2005
Cab - ROPS	ISO 3471 – 2008
Steering	ISO 5010 – 2007
STEERING
Lock to Lock	4.8 seconds @ 60 rpm
TRANSMISSION
Forward - 1	3.8 mph ( 6 kph )
Forward - 2	5.0 mph ( 8 kph )
Forward - 3	7.0 mph ( 11 kph )
Forward - 4	8.8 mph ( 14 kph )
Forward - 5	11.6 mph ( 19 kph )
Forward - 6	14.2 mph ( 23 kph )
Forward - 7	19.6 mph ( 32 kph )
Forward - 8	23.5 mph ( 38 kph )
Forward - 9	34.0 mph ( 55 kph )
Reverse - 1	4.0 mph ( 6 kph )
Reverse - 2	9.1 mph ( 15 kph )
TURNING CIRCLE
Note	Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Aisle Width	233.0 in ( 592 cm )
Turning Dimensions - Clearance Radius	359.0 in ( 912 cm )
Turning Dimensions - Inside Radius	174.0 in ( 442 cm )
Turning Dimensions - SAE Turning Radius	340.0 in ( 864 cm )
Turning Dimensions - Steer Angle - Left/Right	45°
WEIGHTS
Rated Payload	45.2 t ( 45,200 kg )

Dealer Contact Info: