Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $35,000.00 USD
Apply for FinancingHours: | 1477 |
Serial Number: | BGZ04424 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10094694 |
Supplied by HeavyEquipmentData.com →
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.5 in ( 19 cm ) |
Bucket Pin Height - Maximum Lift | 10.3 ft ( 3 m ) |
Bumper Overhang - Behind Rear Axle | 40.2 in ( 102 cm ) |
Clearance at Max Lift and Dump | 7.8 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 92.9 in ( 236 cm ) |
Departure Angle | 26 deg |
Ground Clearance | 7.7 in ( 20 cm ) |
Height - Top of Cab | 6.9 ft ( 2 m ) |
Length - With Bucket on Ground | 137.3 in ( 349 cm ) |
Length - Without Bucket | 108.9 in ( 277 cm ) |
Length w/o Bucket | 9.1 ft ( 3 m ) |
Length with Bucket | 11.5 ft ( 4 m ) |
Maximum Dump Angle | 48 deg |
Maximum Overall Height | 156.6 in ( 398 cm ) |
Rack Back Angle - Maximum Height | 91 deg |
Reach - Maximum Lift/Dump | 16.0 in ( 41 cm ) |
Reach at Max Lift and Dump | 16.0 in ( 41 cm ) |
Turn Radius from Center - Bucket | 83.0 in ( 211 cm ) |
Turn Radius from Center - Coupler | 51.8 in ( 132 cm ) |
Turn Radius from Center - Machine Rear | 64.5 in ( 164 cm ) |
Turning Radius from Center - inc bucket | 85.3 in ( 217 cm ) |
Vehicle Width over Tires | 66.0 in ( 168 cm ) |
Wheel Base | 3.7 ft ( 1 m ) |
Wheelbase | 3.7 ft ( 1 m ) |
Width Over Tires | 5.5 ft ( 2 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
Engine Make | Caterpillar |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power | 74.3 hp ( 55 kw ) |
Gross Power - SAE J1995 | 74.3 hp ( 55 kw ) |
Net Flywheel Power | 73.2 hp ( 55 kw ) |
Net Power - SAE 1349 | 73.2 hp ( 55 kw ) |
Stroke | 4.7 in ( 12 cm ) |
General Specifications | |
Category | Skid Steer Loaders |
category | SKID STEERS |
ENGINE POWER HP (KW) | 66 (49) |
MODEL | 236D |
OPERATING LOAD LBS. (KG) | 1,800 (817) |
OPERATING WIDTH IN. (CM) | 66 (168) |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 1,800 (817) |
Hydraulic System | |
Pump Flow Capacity | 20.0 gpm ( 76 lpm ) |
Relief Valve Pressure | 3,335.0 psi |
Loader | |
Breakout Force | 5,074.0 psi |
Operating Load Rating | 1,800.0 lbs ( 816 kg ) |
Operating Width | 66.0 in ( 168 cm ) |
Tipping Angle | 3600 deg |
Operating Specifications | |
Breakout Force - Tilt Cylinder | 5,074.0 lbs ( 2,302 kg ) |
Chain Box Fluid Capacity - each side | 2.3 gal ( 9 l ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Fuel Capacity | 27.7 gal ( 105 l ) |
Hydraulic System Fluid Capacity | 13.2 gal ( 50 l ) |
Max Speed | 10.6 mph ( 17 kph ) |
Operating Speed | 7.0 mph ( 11 kph ) |
Operational Weight | 6,559.0 lbs ( 2,975 kg ) |
Rated Operating Capacity | 1,800.0 lbs ( 816 kg ) |
Rated Operating Capacity with Optional Counterweight | 2,000.0 lbs ( 907 kg ) |
Tipping Load | 3,600.0 lbs ( 1,633 kg ) |
Service Refill Capacities | |
Chain Box - Each Side | 2.3 gal ( 9 l ) |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 3.0 gal ( 11 l ) |
Fuel Tank | 27.7 gal ( 105 l ) |
Hydraulic System | 13.2 gal ( 50 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |
Weights | |
Operating Weight | 6,559.0 lbs ( 2,975 kg ) |