Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 1849 |
Serial Number: | CAT0248BJSCL00907 |
Machine Location: | REGINA, SK |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
FOPS Level II | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 10.0 in ( 25 cm ) |
Bucket Pin Height - Maximum Lift | 10.2 ft ( 3 m ) |
Bumper Overhang - Rear Axle | 41.0 in ( 104 cm ) |
Clearance at Max Lift and Dump | 7.9 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 94.0 in ( 239 cm ) |
Ground Clearance | 9.0 in ( 23 cm ) |
Length - With Bucket on Ground | 138.0 in ( 351 cm ) |
Length - Without Bucket | 110.0 in ( 279 cm ) |
Length w/o Bucket | 9.2 ft ( 3 m ) |
Length with Bucket | 11.6 ft ( 4 m ) |
Maximum Overall Height | 156.0 in ( 396 cm ) |
Maximum Reach - With Arms Parallel | 53.0 in ( 135 cm ) |
Reach - Maximum Lift/Dump | 21.0 in ( 53 cm ) |
Reach at Max Lift and Dump | 21.3 in ( 54 cm ) |
Turn Radius from Center - Bucket | 83.0 in ( 211 cm ) |
Turn Radius from Center - Coupler | 52.0 in ( 132 cm ) |
Turn Radius from Center - Rear | 64.0 in ( 163 cm ) |
Turning Radius from Center - inc bucket | 82.6 in ( 210 cm ) |
Turning Radius from Center - machine rear | 63.9 in ( 162 cm ) |
Vehicle Width over Tires | 66.0 in ( 168 cm ) |
Wheel Base | 3.8 ft ( 1 m ) |
Wheelbase | 3.8 ft ( 1 m ) |
Width Over Tires | 5.5 ft ( 2 m ) |
Engine | |
Aspiration | turbocharged |
Bore | 3.7 in ( 9 cm ) |
Engine Make | Caterpillar |
Engine Model | Cat 3044C DIT |
Engine Power - ISO 14396 | 80.0 hp ( 60 kw ) |
Gross Power | 76.5 hp ( 57 kw ) |
Gross Power - SAE J1995 | 82.0 hp ( 61 kw ) |
Net Flywheel Power | 76.0 hp ( 57 kw ) |
Net Power - EEC 80/1269 | 77.0 hp ( 57 kw ) |
Net Power - ISO 9249 EEC | 77.0 hp ( 57 kw ) |
Net Power - SAE 1349 | 76.0 hp ( 57 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow | High Flow XPS |
Hydraulic Power | 78.2 hp ( 58 kw ) |
Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Loader Hydraulic Pressure | 4,061.1 psi |
Maximum Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Maximum Loader Hydraulic Pressure | 4,060.0 psi |
Pump Flow Capacity | 33.1 gpm ( 125 lpm ) |
Relief Valve Pressure | 4,061.1 psi |
Loader | |
Breakout Force | 5,482.9 psi |
Operating Load Rating | 1,999.6 lbs ( 907 kg ) |
Tipping Angle | 3999.2 deg |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Lift Cylinder | 4,592.3 lbs ( 2,083 kg ) |
Breakout Force - Tilt Cylinder | 5,484.0 lbs ( 2,488 kg ) |
Chain Box Fluid Capacity - each side | 1.9 gal ( 7 l ) |
Cooling System Fluid Capacity | 2.7 gal ( 10 l ) |
Engine Oil Fluid Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 23.8 gal ( 90 l ) |
Hydraulic System Fluid Capacity | 13.8 gal ( 52 l ) |
Max Speed | 7.8 mph ( 13 kph ) |
Operating Voltage | 12.0 volts |
Operational Weight | 7,319.4 lbs ( 3,320 kg ) |
Rated Operating Capacity | 2,000.0 lbs ( 907 kg ) |
Rated Operating Capacity with Optional Counterweight | 2,100.0 lbs ( 953 kg ) |
Tipping Load | 4,188.0 lbs ( 1,900 kg ) |
Tire Size | 12x16.5 10PR |
Power Train | |
Travel Speed Forward | 7.7 mph ( 12 kph ) |
Travel Speed Forward - 2-Speed Option | 11.8 mph ( 19 kph ) |
Travel Speed Reverse | 7.7 mph ( 12 kph ) |
Travel Speed Reverse - 2-Speed Option | 11.8 mph ( 19 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 1.8 gal ( 7 l ) |
Cooling System | 2.6 gal ( 10 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 23.8 gal ( 90 l ) |
Hydraulic System | 13.7 gal ( 52 l ) |
Hydraulic Tank | 9.2 gal ( 35 l ) |
Weights | |
Operating Weight | 7,321.0 lbs ( 3,321 kg ) |