Equipment ↠ Caterpillar ↠ Skid Steer Loaders ↠ THIS Caterpillar 262C

Caterpillar 262C For Sale in Harrisburg, PA

Name: Caterpillar 262C
Brand: Caterpillar
Price: 25000 USD
Availability: InStock

❮

❯

For Sale: $25,000.00 USD

Apply for Financing

Cleveland Brothers

Cleveland Brothers Dealer Info

Cleveland Brothers Website

Click here to email Cleveland Brothers.

Contact: Erin Westbrook

Click for Phone Number

Machine Info:

Hours:	1659
Serial Number:	MST04656
Machine Location:	HARRISBURG, PA
More Information:	https://catused.com/cu/10132150

Description:

4 TIRES/WHEELS 12X16.5 INCLUDED, 42IN FORKS, INCLUDED, 78IN BUCKET, INCLUDED, AIR CONDITIONING, CAT 262C SKID STEER LOADER, HEATER/DEFROSTER, Lighting, Online Owner's Manual , Pilot Control, ROPS - Enclosed, Self Leveling, STANDARD FLOW HYD

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
SAFETY ITEMS
ROPS Certification Plate	Yes
Safety Decals In Place	No
Safety Decals Legible	No
OPERATOR STATION
Current O&MM	Yes
Current Parts Manual	No
Current Safety Manual	No
ENGINE
Blow By	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	No
Ether Aid	No
TANDEMS/GEARS/BEARINGS/CHAINS
Front Axle	Good
Lines / Linkages	Good
Operating Condition - TANDEMS/GEARS/BEARINGS/CHAINS	Good
Rear Axle	Good
Travel Controls	Good
Travel Motors	Good
Travel Pumps	Good
HYDRAULICS
Leaks - HYDRAULICS	No
ATTACHMENTS / WORK TOOLS
Angle Broom	No
Auger	No
Cold Planer	No
Grapple Bucket	No
Hammer	No
Lanscape Tiller	No
Pick-up Broom	No
Stump Grinder	No
Trencher	No
Wheel Saw	No
BUCKET
Wheel Saw	78 inch
TIRES
Floatation Chains / Tracks	No
Spare	Yes
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Spare	No active or logged codes. Hours match ECM.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Cab
FOPS	SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81, ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position	7.8 in ( 20 cm )
Bucket Pin Height - Maximum Lift	10.6 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	14.7 in ( 37 cm )
Bumper Overhang - Rear Axle	42.8 in ( 109 cm )
Clearance at Max Lift and Dump	8.1 ft ( 2 m )
Clearance at Maximum Lift and Dump	96.4 in ( 245 cm )
Departure Angle	26 deg
Ground Clearance	8.8 in ( 22 cm )
Height - Top of Cab	6.9 ft ( 2 m )
Length - With Bucket on Ground	145.0 in ( 368 cm )
Length - Without Bucket	117.0 in ( 297 cm )
Length w/o Bucket	10.3 ft ( 3 m )
Length with Bucket	12.1 ft ( 4 m )
Maximum Dump Angle	50 deg
Maximum Overall Height	160.4 in ( 407 cm )
Maximum Reach - With Arms Parallel	50.5 in ( 128 cm )
Rack Back Angle - Maximum Height	85 deg
Reach - Maximum Lift/Dump	30.7 in ( 78 cm )
Reach at Max Lift and Dump	30.7 in ( 78 cm )
Turn Radius from Center - Bucket	85.3 in ( 217 cm )
Turn Radius from Center - Coupler	54.6 in ( 139 cm )
Turn Radius from Center - Rear	68.1 in ( 173 cm )
Turning Radius from Center - inc bucket	97.8 in ( 248 cm )
Turning Radius from Center - machine rear	56.8 in ( 144 cm )
Vehicle Width over Tires	66.0 in ( 168 cm )
Wheel Base	4.1 ft ( 1 m )
Wheelbase	4.1 ft ( 1 m )
Width Over Tires	5.5 ft ( 2 m )
Engine
Bore	3.7 in ( 9 cm )
Displacement	201.0 cu in ( 3,294 cu cm )
Engine Make	Caterpillar
Engine Model	Cat C3.4 DIT
Engine Power - ISO 14396	83.0 hp ( 62 kw )
Gross Power - SAE J1995	84.0 hp ( 63 kw )
Net Flywheel Power	82.0 hp ( 61 kw )
Net Power - EEC 80/1269	83.0 hp ( 62 kw )
Net Power - ISO 9249 EEC	83.0 hp ( 62 kw )
Net Power - SAE 1349	82.0 hp ( 61 kw )
Number of Cylinders	4.0
Power Measured @	2,500.0 rpm
Stroke	4.7 in ( 12 cm )
Hydraulic System
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.8 hp ( 32 kw )
Loader Hydraulic Flow	22.0 gpm ( 83 lpm )
Loader Hydraulic Pressure	3,335.0 psi
Maximum Loader Hydraulic Flow	33.0 gpm ( 125 lpm )
Maximum Loader Hydraulic Pressure	4,061.0 psi
Pump Flow Capacity	22.0 gpm ( 83 lpm )
Relief Valve Pressure	3,335.0 psi
Loader
Breakout Force	7,315.0 psi
Bucket Capacity	0.6 cu yd ( 0 cu m )
Operating Load Rating	2,700.0 lbs ( 1,225 kg )
Operating Width	66.0 in ( 168 cm )
Tipping Angle	5400 deg
Operating Specifications
Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,315.0 lbs ( 3,318 kg )
Chain Box Fluid Capacity - each side	2.6 gal ( 10 l )
Cooling System Fluid Capacity	3.7 gal ( 14 l )
Engine Oil Fluid Capacity	2.6 gal ( 10 l )
Fuel Capacity	26.0 gal ( 98 l )
Hydraulic System Fluid Capacity	15.0 gal ( 57 l )
Max Speed	7.7 mph ( 12 kph )
Operating Voltage	12.0 volts
Operational Weight	7,968.0 lbs ( 3,614 kg )
Rated Operating Capacity	2,700.0 lbs ( 1,225 kg )
Rated Operating Capacity with Optional Counterweight	2,945.0 lbs ( 1,336 kg )
Tipping Load	5,400.0 lbs ( 2,449 kg )
Power Train
Travel Speed Forward	7.7 mph ( 12 kph )
Travel Speed Forward - 2-Speed Option	12.0 mph ( 19 kph )
Travel Speed Reverse	7.7 mph ( 12 kph )
Travel Speed Reverse - 2-Speed Option	12.0 mph ( 19 kph )
Service Refill Capacities
Chain Box - Each Side	2.6 gal ( 10 l )
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	2.6 gal ( 10 l )
Fuel Tank	26.0 gal ( 98 l )
Hydraulic System	15.0 gal ( 57 l )
Hydraulic Tank	11.0 gal ( 42 l )
Weights
Operating Weight	7,968.0 lbs ( 3,614 kg )

Dealer Contact Info:

Cleveland Brothers

Cleveland Brothers Dealer Info

Cleveland Brothers Website

Click here to email Cleveland Brothers.

Fax: 717-564-6931

Contact: Erin Westbrook

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon