Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $14,900.00 USD
Apply for FinancingStock Number: | 44376 |
Machine Location: | MANHEIM, PA |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
FOPS Level II | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 8.4 in ( 21 cm ) |
Bucket Pin Height - Maximum Lift | 10.6 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 13.6 in ( 35 cm ) |
Bumper Overhang - Rear Axle | 41.0 in ( 104 cm ) |
Clearance at Max Lift and Dump | 8.0 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 95.0 in ( 241 cm ) |
Ground Clearance | 8.0 in ( 20 cm ) |
Length - With Bucket on Ground | 142.0 in ( 361 cm ) |
Length - Without Bucket | 114.0 in ( 290 cm ) |
Length w/o Bucket | 9.6 ft ( 3 m ) |
Length with Bucket | 11.9 ft ( 4 m ) |
Maximum Overall Height | 160.0 in ( 406 cm ) |
Maximum Reach - With Arms Parallel | 52.0 in ( 132 cm ) |
Reach - Maximum Lift/Dump | 33.0 in ( 84 cm ) |
Reach at Max Lift and Dump | 32.7 in ( 83 cm ) |
Turn Radius from Center - Bucket | 86.0 in ( 218 cm ) |
Turn Radius from Center - Coupler | 52.0 in ( 132 cm ) |
Turn Radius from Center - Rear | 67.0 in ( 170 cm ) |
Turning Radius from Center - inc bucket | 85.9 in ( 218 cm ) |
Turning Radius from Center - machine rear | 66.8 in ( 170 cm ) |
Vehicle Width over Tires | 72.0 in ( 183 cm ) |
Wheel Base | 4.0 ft ( 1 m ) |
Wheelbase | 4.1 ft ( 1 m ) |
Width Over Tires | 6.1 ft ( 2 m ) |
Engine | |
Aspiration | turbocharged |
Bore | 3.7 in ( 9 cm ) |
Engine Make | Caterpillar |
Engine Model | Cat 3044C DIT |
Engine Power - ISO 14396 | 80.0 hp ( 60 kw ) |
Gross Power - SAE J1995 | 82.0 hp ( 61 kw ) |
Net Flywheel Power | 76.0 hp ( 57 kw ) |
Net Power - EEC 80/1269 | 77.0 hp ( 57 kw ) |
Net Power - ISO 9249 EEC | 77.0 hp ( 57 kw ) |
Net Power - SAE 1349 | 76.0 hp ( 57 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow | High Flow XPS |
Hydraulic Power | 78.2 hp ( 58 kw ) |
Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Loader Hydraulic Pressure | 4,061.1 psi |
Maximum Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Maximum Loader Hydraulic Pressure | 4,060.0 psi |
Pump Flow Capacity | 33.1 gpm ( 125 lpm ) |
Relief Valve Pressure | 4,061.1 psi |
Loader | |
Breakout Force | 5,507.2 psi |
Operating Load Rating | 2,698.5 lbs ( 1,224 kg ) |
Tipping Angle | 5399.2 deg |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Lift Cylinder | 5,191.9 lbs ( 2,355 kg ) |
Breakout Force - Tilt Cylinder | 5,508.0 lbs ( 2,498 kg ) |
Chain Box Fluid Capacity - each side | 2.2 gal ( 8 l ) |
Cooling System Fluid Capacity | 2.7 gal ( 10 l ) |
Engine Oil Fluid Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 23.8 gal ( 90 l ) |
Hydraulic System Fluid Capacity | 14.1 gal ( 53 l ) |
Max Speed | 7.3 mph ( 12 kph ) |
Operating Voltage | 12.0 volts |
Operational Weight | 7,994.0 lbs ( 3,626 kg ) |
Rated Operating Capacity | 2,700.0 lbs ( 1,225 kg ) |
Rated Operating Capacity with Optional Counterweight | 2,750.0 lbs ( 1,247 kg ) |
Tipping Load | 5,613.0 lbs ( 2,546 kg ) |
Tire Size | 12x16.5 10PR |
Power Train | |
Travel Speed Forward | 7.2 mph ( 12 kph ) |
Travel Speed Forward - 2-Speed Option | 11.0 mph ( 18 kph ) |
Travel Speed Reverse | 7.2 mph ( 12 kph ) |
Travel Speed Reverse - 2-Speed Option | 11.0 mph ( 18 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 2.1 gal ( 8 l ) |
Cooling System | 2.6 gal ( 10 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 23.8 gal ( 90 l ) |
Hydraulic System | 14.0 gal ( 53 l ) |
Hydraulic Tank | 9.2 gal ( 35 l ) |
Weights | |
Operating Weight | 7,995.0 lbs ( 3,626 kg ) |