Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 16764 |
Serial Number: | CAT0904BEB4L00628 |
Machine Location: | LOS ANGELES, CA |
Supplied by HeavyEquipmentData.com →
Bucket | |
Breakout Force | 8,003.0 lbs ( 3,630 kg ) |
Breakout Force - Reference Bucket | 8,003.0 lbs ( 3,630 kg ) |
Bucket Capacity - heaped | 0.8 cu yd ( 1 cu m ) |
Bucket Width | 5.9 ft ( 2 m ) |
Dump Clearance at Max Raise | 7.8 ft ( 2 m ) |
Reference Bucket Capacity | 0.8 cu yd ( 1 cu m ) |
Type - Reference bucket | General purpose |
Cab | |
FOPS | meets the following criteria: SAEJ1231 JAN81 ISO3449:1992 |
ROPS | meets the following criteria: SAEJ1040 MAY94 ISO 3471-1:1986 |
Dimensions | |
Dump Clearance at Max Lift | 7.9 ft ( 2 m ) |
Height - Top of Cab | 7.9 ft ( 2 m ) |
Hinge Pin - Max Height | 10.3 ft ( 3 m ) |
Length w/ Bucket on Ground | 15.6 ft ( 5 m ) |
Length with out Forks on Ground | 17.5 ft ( 5 m ) |
Length with Bucket on Ground | 17.5 ft ( 5 m ) |
Max Lift Height | 10.1 ft ( 3 m ) |
Reach at Max Height and Dump | 2.2 ft ( 1 m ) |
Reach at Max Lift and Dump | 2.2 ft ( 1 m ) |
Tread Width | 52.4 in ( 133 cm ) |
Width Over Tires | 5.9 ft ( 2 m ) |
Engine | |
Aspiration | turbocharged |
Bore | 3.5 in ( 9 cm ) |
EEC 80/1269 Rating | 52.0 hp ( 39 kw ) |
Gross Power | 55.0 hp ( 41 kw ) |
ISO 9249 Rating | 52.0 hp ( 39 kw ) |
Net Power | 52.0 hp ( 39 kw ) |
Stroke | 4.0 in ( 10 cm ) |
Hydraulic System | |
3rd Valve Flow | 22.0 gpm ( 83 lpm ) |
Dump Time | 0.8 seconds |
Lower Time | 3.2 seconds |
Main Relief | 3,002.0 psi |
Pump Flow Capacity | 22.0 gpm ( 83 lpm ) |
Raise Time | 4.5 seconds |
Operating Specifications | |
Alternator Supplied Amperage | 75 amps |
Articulation | 42 deg |
Breakout Force | 8,003.0 lbs ( 3,630 kg ) |
Dump Height at Full Lift | 7.8 ft ( 2 m ) |
Engine Oil Capacity | 2.0 gal ( 8 l ) |
Engine Oil Fluid Capacity | 2.0 gal ( 8 l ) |
Fuel Capacity | 22.0 gal ( 83 l ) |
Full Turn Static Tipping Load - Bucket | 5,511.0 lbs ( 2,500 kg ) |
Full Turn Static Tipping Load - Forks | 4409 lb |
Hydraulic Lift Capacity | 7,464.0 lbs ( 3,386 kg ) |
Operating Voltage | 12.0 volts |
Oscillation +/- | 8 deg |
Rack Back - Transport Position | 45 deg |
Rated Bucket Capacity | 0.8 cu yd ( 1 cu m ) |
Rated Operating Load at Full Turn - Bucket | 2,756.0 lbs ( 1,250 kg ) |
Rated Operating Load at Full Turn - Forks | 3527 lb |
Reach - Without Teeth | 2.2 ft ( 1 m ) |
Static Tipping Load - Bucket | 6,568.0 lbs ( 2,979 kg ) |
Static Tipping Weight | 6,568.0 lbs ( 2,979 kg ) |
Straight Tipping Load - Bucket | 6,568.0 lbs ( 2,979 kg ) |
Transmission Fluid Capacity | 2.0 gal ( 8 l ) |
Power Train, Axles and Brakes | |
Axle and Final Drives | Fixed front axle and oscillating rear axle with conventional differential and planetary gear reduction final drives |
Brake Standards | Brake meets ISO 3450:1996 |
Maximum Travel Speeds - Forward and Reverse, High | 12.0 mph ( 19 kph ) |
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low | 4.0 mph ( 6 kph ) |
Service and Parking Brake | Service and Parking brake are combined in an oil immersed drop box |
Transmission Type | Closed-loop two-speed hydrostatic single-path transmission. |
Service Refill Capacities | |
Cooling System | 2.0 gal ( 8 l ) |
Engine Oil | 2.0 gal ( 8 l ) |
Fuel Tank | 22.0 gal ( 83 l ) |
Hydraulic System | 11.0 gal ( 42 l ) |
Transmission | |
Max Speed - Forward | 12.0 mph ( 19 kph ) |
Max Speed - Reverse | 12.0 mph ( 19 kph ) |
Max Speed Forward | 12.5 mph ( 20 kph ) |
Max Speed Reverse | 12.5 mph ( 20 kph ) |
Number of Forward Gears | 2.0 |
Number of Reverse Gears | 2.0 |
Weights | |
Operating Weight | 9,810.0 lbs ( 4,450 kg ) |