Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 86 |
Serial Number: | CAT00906PMZ600364 |
Machine Location: | SACRAMENTO, CA |
Supplied by HeavyEquipmentData.com →
Bucket | |
Breakout Force | 10,340.0 lbs ( 4,690 kg ) |
Bucket Capacity - heaped | 0.8 cu yd ( 1 cu m ) |
Bucket Width | 6.2 ft ( 2 m ) |
Dump Clearance at Max Raise | 8.0 ft ( 2 m ) |
Cab | |
FOPS | meets the following criteria: SAE J231 JAN81 ISO 3449:1992 |
ROPS | meets the following criteria: SAE J1040 MAY94 ISO 3471-1:1986 |
Dimensions | |
Height - Top of Cab | 8.8 ft ( 3 m ) |
Hinge Pin - Max Height | 10.3 ft ( 3 m ) |
Length with Bucket on Ground | 16.6 ft ( 5 m ) |
Reach at Max Lift and Dump | 2.6 ft ( 1 m ) |
Tread Width | 55.0 in ( 140 cm ) |
Wheelbase | 6.5 ft ( 2 m ) |
Width Over Tires | 6.2 ft ( 2 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
EEC 80/1269 Rating | 71.0 hp ( 53 kw ) |
Engine Model | 3044C |
Gross Power | 75.0 hp ( 56 kw ) |
ISO 9249 Rating | 71.0 hp ( 53 kw ) |
Net Power | 68.0 hp ( 51 kw ) |
Power Measured @ | 2,600.0 rpm |
SAE J1349 Rating | 71.0 hp ( 53 kw ) |
Stroke | 4.8 in ( 12 cm ) |
General Specifications | |
?Model | 906.0 |
Breakout Force | 11,233.0 lbf |
Bucket Capacity | 2.Jan cu yd |
Bucket Capacity cu. yd. (cu m) | 1.0 - 1.5 (.80 - 1.15) |
Category | Wheel Loaders |
Engine | C2.8 |
Engine Power hp (kw) | 74 (56) |
Engine type | Cat C2.8 |
Full-Turn Tipping Load | 8,225.0 lbs ( 3,731 kg ) |
Net Power | 74.7 hp ( 56 kw ) |
Operating Weight | 12,628.0 lbs ( 5,728 kg ) |
Operating?Weight | 12,628 (5,730) |
Tip Load | 7,529 (3,415) |
Travel Speed (Fwd/Rev) | 25 / 19 mph |
Travel Speed | 25 / 12.5 mph |
Hydraulic System | |
3rd Valve Flow | 17.7 gpm ( 67 lpm ) |
Dump Time | 1.5 seconds |
Lower Time | 3.2 seconds |
Main Relief | 3,400.0 psi |
Pump Flow Capacity | 18.0 gpm ( 68 lpm ) |
Pump Type | Gear |
Raise Time | 4.5 seconds |
Relief Valve Setting | 3,408.4 psi |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Articulation | 40 deg |
Breakout Force | 10,340.0 lbs ( 4,690 kg ) |
Cooling System Fluid Capacity | 5.5 gal ( 21 l ) |
Dump Height at Full Lift | 8.0 ft ( 2 m ) |
Engine Oil Fluid Capacity | 2.6 gal ( 10 l ) |
Fuel Capacity | 19.6 gal ( 74 l ) |
Full Turn Static Tipping Load - Bucket | 6,666.0 lbs ( 3,024 kg ) |
Full Turn Static Tipping Load - Forks | 5500 lb |
Hydraulic Lift Capacity | 9,100.0 lbs ( 4,128 kg ) |
Hydraulic System Fluid Capacity | 17.5 gal ( 66 l ) |
Operating Voltage | 12.0 volts |
Operating Weight | 10,912.0 lbs ( 4,950 kg ) |
Oscillation +/- | 11 deg |
Rack Back - Transport Position | 53 deg |
Rated Bucket Capacity | 1.1 cu yd ( 1 cu m ) |
Rated Operating Load at Full Turn - Bucket | 3,333.0 lbs ( 1,512 kg ) |
Rated Operating Load at Full Turn - Forks | 4433 lb |
Reach - Without Teeth | 2.8 ft ( 1 m ) |
Rear Axle Oscillation | 22 deg |
Static Tipping Weight | 7,546.0 lbs ( 3,423 kg ) |
Straight Tipping Load - Bucket | 7,546.0 lbs ( 3,423 kg ) |
Tire Size | 12.5x18 |
Transmission Fluid Capacity | 2.6 gal ( 10 l ) |
Power Train, Axles and Brakes | |
Axle and Final Drives | fixed front axle with limited slip differential and planetary ge |
Brake Standards | Brake meets ISO 3450:1996 |
Maximum Travel Speeds - Forward and Reverse, High | 12.0 mph ( 19 kph ) |
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low | 4.0 mph ( 6 kph ) |
Service and Parking Brake | Are combined in a single dry-disc driveline brake |
Transmission Type | Closed-loop two-speed hydrostatic single-path transmission. |
Service Refill Capacities | |
Cooling System | 5.5 gal ( 21 l ) |
Engine Oil | 2.6 gal ( 10 l ) |
Fuel Tank | 19.6 gal ( 74 l ) |
Hydraulic System | 17.5 gal ( 66 l ) |
Transmission | |
Max Speed - Forward | 12.0 mph ( 19 kph ) |
Max Speed - Reverse | 12.0 mph ( 19 kph ) |
Number of Forward Gears | 2.0 |
Number of Reverse Gears | 2.0 |
Transmission Type | Hydrostatic |
Weights | |
Operating Weight | 10,912.0 lbs ( 4,950 kg ) |