Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $27,000.00 USD
Apply for FinancingHours: | 3589 |
Serial Number: | SDH01858 |
Machine Location: | GARCHING BEI, MUNICH, GERMANY |
More Information: | https://catused.com/cu/10125464 |
Supplied by HeavyEquipmentData.com →
Bucket | |
Bucket Capacities | 1 - 2 cu yd ( 1 cu m ) |
Bucket Capacity - heaped | 1.2 cu yd ( 1 cu m ) |
Bucket Width | 6.2 ft ( 2 m ) |
Dump Clearance at Max Raise | 7.9 ft ( 2 m ) |
Cab | |
FOPS | SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471-1994 |
Dimensions | |
Ground Clearance | 1.0 ft ( 0 m ) |
Height - Top of Cab | 8.1 ft ( 2 m ) |
Hinge Pin - Max Height | 10.6 ft ( 3 m ) |
Length with Bucket on Ground | 18.4 ft ( 6 m ) |
Reach at Max Lift and Dump | 2.7 ft ( 1 m ) |
Wheel Base | 7.1 ft ( 2 m ) |
Wheelbase | 7.2 ft ( 2 m ) |
Width Over Tires | 6.1 ft ( 2 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
EEC 80/1269 Rating | 71.0 hp ( 53 kw ) |
Engine Model | C3.4 |
Gross Power | 74.0 hp ( 55 kw ) |
ISO 9249 Rating | 71.0 hp ( 53 kw ) |
Make | Cat |
Model | C3.4 |
Net Power | 70.0 hp ( 52 kw ) |
Power Measured @ | 2,500.0 rpm |
SAE J1349 Rating | 70.0 hp ( 52 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Dump Time | 2.0 seconds |
Lower Time | 4.0 seconds |
Main Relief | 3,400.0 psi |
Pump Flow Capacity | 22.0 gpm ( 83 lpm ) |
Raise Time | 5.0 seconds |
Relief Valve Setting | 3,400.0 psi |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Breakout Force | 9,442.0 lbs ( 4,283 kg ) |
Cooling System Fluid Capacity | 6.4 gal ( 24 l ) |
Engine Oil Fluid Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 13.8 gal ( 52 l ) |
Full Turn Static Tipping Load - Bucket | 6,967.0 lbs ( 3,160 kg ) |
Hydraulic System Fluid Capacity | 22.2 gal ( 84 l ) |
Operating Voltage | 12.0 volts |
Operating Weight | 12,412.1 lbs ( 5,630 kg ) |
Rack Back - Transport Position | 52 deg |
Rated Bucket Capacity | 1.2 cu yd ( 1 cu m ) |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center, Transport 100 mm (4 in) Above Ground) | 5,997.0 lbs ( 2,720 kg ) |
Static Tipping Weight | 8,785.5 lbs ( 3,985 kg ) |
Straight Tipping Load - Bucket | 8,785.0 lbs ( 3,985 kg ) |
Tire Size | 405/70 R18 |
Turning Radius | 7.3 ft ( 2 m ) |
Service Refill Capacities | |
Cooling System | 6.3 gal ( 24 l ) |
Engine Oil | 2.6 gal ( 10 l ) |
Fuel Tank | 13.7 gal ( 52 l ) |
Hydraulic System | 22.2 gal ( 84 l ) |
Transmission | |
Max Speed - Forward | 12.5 mph ( 20 kph ) |
Max Speed - Reverse | 12.5 mph ( 20 kph ) |
Number of Forward Gears | 2.0 |
Number of Reverse Gears | 2.0 |
Transmission Type | Hydrostatic |
Travel Speed 1 | 4.3 mph ( 7 kph ) |
Travel Speed 2 | 12.4 mph ( 20 kph ) |
Weights | |
Operating Weight | 12,412.0 lbs ( 5,630 kg ) |
Operational Weight | 12,412.0 lbs ( 5,630 kg ) |