Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS Caterpillar 908-14

Caterpillar 908-14 For Sale in Raleigh, NC

Name: Caterpillar 908-14
Brand: Caterpillar
Price: 113000 USD
Availability: InStock

❮

❯

For Sale: $113,000.00 USD

Apply for Financing

Gregory Poole CAT

Gregory Poole CAT Dealer Info

Gregory Poole CAT Website

Click here to email Gregory Poole CAT.

Contact: McCrea Wallace

Click for Phone Number

Machine Info:

Hours:	70
Serial Number:	HZ800997
Machine Location:	RALEIGH, NC
More Information:	https://catused.com/cu/10155901

Description:

Air Conditioner, Auxiliary Hydraulics - 3rd Valve, Auxiliary Hydraulics Pressure - Medium Pressure, Beacon, Bucket, Combined Hydraulics - Two Way, Counterweight, Coupler - Quick, Coupler Type - Hydraulic, Engine Enclosures, Lift - Standard, Lighting, Mirrors, Online Owner's Manual , Radio - AM FM Radio, Ride Control, ROPS - Enclosed, Steering Type - Wheel, Ultra Low Sulfur Diesel Fuel

Machine Details:

GENERAL CONDITION
Machine Starts and is Operable	Yes
S.O.S. (All Compartments)	No
Tires are Aired Up and Drivable	Yes
GENERAL APPEARANCE
Cleaning Required	No
SAFETY ITEMS
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Safety Decals Legible	1/4 tank.
ENGINE
Blow By	No
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
Oil in Anti-Freeze	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	No
Ether Aid	No
TRANSMISSION
Transmission - Noisy	No
STEERING
Articulate P & B	Good
Hand Metering Unit	Good
Lines / Fittings - STEERING	Good
Steering Cylinder	Good
Steering Linkage	Good
Steering Valves / Pumps	Good
Steering Wheel Tilt / Extend	Good
Valves	Good
BRAKE
Holds In Park	Yes
Leaks - BRAKE	No
HYDRAULICS
Leaks - HYDRAULICS	No
BUCKET
Standard Lift	Yes
FINAL DRIVES
Leaks - FINAL DRIVES	No
TIRES
Spare	No
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Spare	Inspection done 12Sept24 @ 70 hours.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Breakout Force	13,710.0 lbs ( 6,219 kg )
Bucket Capacity - heaped	0.8 cu yd ( 1 cu m )
Dump Clearance at Max Raise	10.4 ft ( 3 m )
Cab
FOPS	meets the following criteria: SAE J231 JAN81 ISO 3449:1992
ROPS	meets the following criteria: SAE J1040 MAY94 ISO 3471-1:1986
Dimensions
Height - Top of Cab	9.1 ft ( 3 m )
Hinge Pin - Max Height	11.1 ft ( 3 m )
Length with Bucket on Ground	17.5 ft ( 5 m )
Tread Width	62.4 in ( 159 cm )
Wheelbase	7.3 ft ( 2 m )
Width Over Tires	6.5 ft ( 2 m )
Engine
Bore	3.7 in ( 9 cm )
EEC 80/1269 Rating	80.0 hp ( 60 kw )
Gross Power	84.0 hp ( 63 kw )
ISO 9249 Rating	80.0 hp ( 60 kw )
Net Power	76.0 hp ( 57 kw )
SAE J1349 Rating	80.0 hp ( 60 kw )
Stroke	4.8 in ( 12 cm )
General Specifications
?Model	908.0
Breakout Force	11,446.0 lbf
Bucket Capacity	2.Jan cu yd
Bucket Capacity cu. yd. (cu m)	1.0 - 1.5 (.80 - 1.15)
Category	Wheel Loaders
Engine	C2.8
Engine Power hp (kw)	74 (56)
Engine type	Cat C2.8
Full-Turn Tipping Load	8,895.0 lbs ( 4,035 kg )
Net Power	74.7 hp ( 56 kw )
Operating Weight	14,617.0 lbs ( 6,630 kg )
Operating?Weight	14,617 (6,632)
Tip Load	10,604 (4,812)
Travel Speed (Fwd/Rev)	25 / 19 mph
Travel Speed	25 / 12.5 mph
Hydraulic System
3rd Valve Flow	21.6 gpm ( 82 lpm )
Dump Time	2.4 seconds
Lower Time	3.2 seconds
Main Relief	3,400.0 psi
Pump Flow Capacity	15.9 gpm ( 60 lpm )
Pump Type	Gear
Raise Time	4.5 seconds
Relief Valve Setting	3,400.0 psi
Operating Specifications
Alternator Supplied Amperage	90 amps
Articulation	40 deg
Breakout Force	13,710.0 lbs ( 6,219 kg )
Cooling System Fluid Capacity	5.8 gal ( 22 l )
Dump Height at Full Lift	10.4 ft ( 3 m )
Engine Oil Fluid Capacity	2.6 gal ( 10 l )
Fuel Capacity	21.0 gal ( 79 l )
Full Turn Static Tipping Load - Bucket	8,270.0 lbs ( 3,751 kg )
Full Turn Static Tipping Load - Forks	6860 lb
Hydraulic Lift Capacity	9,900.0 lbs ( 4,491 kg )
Hydraulic System Fluid Capacity	17.0 gal ( 64 l )
Operating Voltage	12.0 volts
Operating Weight	13,288.0 lbs ( 6,027 kg )
Oscillation +/-	11 deg
Rack Back - Transport Position	56 deg
Rated Bucket Capacity	1.3 cu yd ( 1 cu m )
Rated Operating Load at Full Turn - Bucket	4,136.0 lbs ( 1,876 kg )
Rated Operating Load at Full Turn - Forks	5291 lb
Reach - Without Teeth	2.8 ft ( 1 m )
Rear Axle Oscillation	22 deg
Static Tipping Weight	9,636.0 lbs ( 4,371 kg )
Straight Tipping Load - Bucket	9,636.0 lbs ( 4,371 kg )
Tire Size	12.5-18
Transmission Fluid Capacity	2.6 gal ( 10 l )
Power Train, Axles and Brakes
Axle and Final Drives	fixed front axle with limited slip differential and planetary ge
Brake Standards	Brake meets ISO 3450:1996
Maximum Travel Speeds - Forward and Reverse, High	12.0 mph ( 19 kph )
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low	4.0 mph ( 6 kph )
Service and Parking Brake	Are combined in a single dry-disc driveline brake
Transmission Type	Closed-loop two-speed hydrostatic single-path transmission.
Service Refill Capacities
Cooling System	5.8 gal ( 22 l )
Engine Oil	2.6 gal ( 10 l )
Fuel Tank	21.0 gal ( 79 l )
Hydraulic System	17.0 gal ( 64 l )
Transmission
Max Speed - Forward	12.0 mph ( 19 kph )
Max Speed - Reverse	12.0 mph ( 19 kph )
Number of Forward Gears	2.0
Number of Reverse Gears	2.0
Transmission Type	Hydrostatic
Weights
Operating Weight	13,288.0 lbs ( 6,027 kg )

Dealer Contact Info:

Gregory Poole CAT

Gregory Poole CAT Dealer Info

Gregory Poole CAT Website

Click here to email Gregory Poole CAT.

Contact: McCrea Wallace

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon