Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS 2008 Caterpillar 930H

2008 Caterpillar 930H For Sale in South Mills, NC

Name: 2008 Caterpillar 930H
Brand: Caterpillar
Price: 67500 USD
Availability: InStock

❮

❯

For Sale: $67,500.00 USD

Apply for Financing

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Machine Info:

Serial Number:	CEG-DHC00350
Stock Number:	CEG-13-8721
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat and air conditioning. Hydraulic quick coupler with forks and a 100” wide general purpose bucket in good condition with good cutting edges. The pre-emissions (no def) Cat diesel engine starts easily and burns clean exhaust. Single lever hydraulic & transmission control. Mid-matched 20.5R25 tires averaging 50%., The transmission shifts smoothly through all ranges. Center joint and steering cylinders are tight. Good brakes. Boom, bucket and linkage have no excessive play. Original factory paint with no major damage except some rust around bottom of cab. Inside cab clean & functional. Well maintained older loader with no known issues.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Bucket Capacity - struck	2.5 cu yd ( 2 cu m )
Bucket Width	8.4 ft ( 3 m )
Dump Clearance at Max Raise	9.6 ft ( 3 m )
Dimensions
Dump Clearance at Max Lift	9.3 ft ( 3 m )
Fork Tine Length	4.0 ft ( 1 m )
Ground Clearance	1.4 ft ( 0 m )
Height - Top of Cab	10.8 ft ( 3 m )
Hinge Pin - Max Height	13.4 ft ( 4 m )
Hinge Pin Max Height	13.3 ft ( 4 m )
Length w/ Bucket on Ground	25.0 ft ( 8 m )
Length with out Forks on Ground	25.8 ft ( 8 m )
Length with Bucket on Ground	24.8 ft ( 8 m )
Max Lift Height	12.8 ft ( 4 m )
Reach at Max Height and Dump	3.1 ft ( 1 m )
Reach at Max Lift and Dump	3.6 ft ( 1 m )
Wheelbase	9.6 ft ( 3 m )
Width Over Tires	8.5 ft ( 3 m )
Engine
Displacement	403.0 cu in ( 6,604 cu cm )
Engine Model	C6.6
Make	Cat
Max Torque	547.0 lbs ft ( 742 nm )
Model	C6.6
Number of Cylinders	6.0
Power Measured @	2,300.0 rpm
Hydraulic System
Dump Time	1.7 seconds
Lower Time	2.8 seconds
Pump Flow Capacity	58.0 gpm ( 220 lpm )
Pump Type	Impement Pump
Raise Time	5.0 seconds
Relief Valve Setting	3,755.0 psi
Operating Specifications
Cooling System Fluid Capacity	10.6 gal ( 40 l )
Engine Oil Capacity	4.0 gal ( 15 l )
Engine Oil Fluid Capacity	4.0 gal ( 15 l )
Front Axle/Diff Fluid Capacity	6.9 gal ( 26 l )
Front Diff Fluid Capacity	6.9 gal ( 26 l )
Operating Weight	28,725.0 lbs ( 13,029 kg )
Rated Bucket Capacity	3.2 cu yd ( 2 cu m )
Rear Axle/Diff Fluid Capacity	6.6 gal ( 25 l )
Rear Diff Fluid Capacity	6.7 gal ( 25 l )
Static Tipping Load - Bucket	19,933.0 lbs ( 9,041 kg )
Static Tipping Load - Forks	15,977.0 lbs ( 7,247 kg )
Static Tipping Weight	18,321.0 lbs ( 8,310 kg )
Tire Size	20.5R25 L3 XHA
Transmission
Max Speed - Forward	23.8 mph ( 38 kph )
Max Speed - Reverse	15.0 mph ( 24 kph )
Max Speed Forward	23.8 mph ( 38 kph )
Max Speed Reverse	15.0 mph ( 24 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Transmission Type	Standard Transmission max travel speed
Weights
Operational Weight	28,684.0 lbs ( 13,011 kg )

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon