Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Click here to place a bidHours: | 36639 |
Serial Number: | XXT00825 |
Machine Location: | GRANDE PRAIRIE, AB |
Supplied by HeavyEquipmentData.com →
Bucket | |
Bucket Capacities | 6.5 cu yd ( 5 cu m ) |
Dump Clearance at Max Raise | 9.3 ft ( 3 m ) |
Cab | |
FOPS | SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471-1994 |
Dimensions | |
Bucket Pin Height - Maximum Lift | 13.0 ft ( 4 m ) |
Carry Height | 1.5 ft ( 0 m ) |
Centerline of Front Axle to Hitch | 5.0 ft ( 2 m ) |
Digging Depth | 3.9 in ( 10 cm ) |
Dump Angle at Maximum Lift | 49 deg |
Dump Clearance at Maximum Lift - 45 degrees | 9.3 ft ( 3 m ) |
Height - Center of Axle | 2.2 ft ( 1 m ) |
Height - Top of ROPS/FOPS | 10.9 ft ( 3 m ) |
Length - Rear Axle to Bumper | 6.4 ft ( 2 m ) |
Overall Height - Bucket Raised | 17.3 ft ( 5 m ) |
Overall Length | 25.1 ft ( 8 m ) |
Rack Back Angle - Carry | 45 deg |
Rack Back Angle - Maximum Lift | 54 deg |
Reach at Maximum Lift and 45 degrees Dump | 3.8 ft ( 1 m ) |
Wheel Base | 10.0 ft ( 3 m ) |
Wheel Base Length | 10.0 ft ( 3 m ) |
Engine | |
Bore | 4.0 in ( 10 cm ) |
Displacement | 402.0 cu in ( 6,588 cu cm ) |
EEC 80/1269 | 170.0 hp ( 127 kw ) |
Engine Model | C7.1 ACERT |
Gross Power | 175.0 hp ( 131 kw ) |
Model | C6.6 ACERT |
Net Power | 169.0 hp ( 126 kw ) |
Net Torque | 591.0 lbs ft ( 801 nm ) |
Number of Cylinders | 6.0 |
Rated Net Power | 169.0 hp ( 126 kw ) |
Stroke | 5.0 in ( 13 cm ) |
Torque Measured @ | 1,600.0 rpm |
Hydraulic System | |
Dump Time | 1.5 seconds |
Lower Time | 2.7 seconds |
Pump Flow Capacity | 50.0 gpm ( 189 lpm ) |
Raise Time | 6.2 seconds |
Relief Valve Setting | 4,061.0 psi |
Loader Hydraulic System | |
Bore (1) | 4.7 in ( 12 cm ) |
Bore (2) | 5.9 in ( 15 cm ) |
Dump | 1.5 seconds |
Hydraulic Cycle Time | 9.7 seconds |
Lower, Empty, Float Down | 2.7 seconds |
Pump Flow - Implement Pump | 50.0 gpm ( 189 lpm ) |
Raise | 5.5 seconds |
Stroke (1) | 31.1 in ( 79 cm ) |
Stroke (2) | 21.9 in ( 56 cm ) |
Total | 9.7 seconds |
Operating Specifications | |
Articulation Angle | 40 deg |
Cooling System Fluid Capacity | 8.5 gal ( 32 l ) |
Dump Clearance at Full Lift and 45 degrees Dump Angle | 9.3 ft ( 3 m ) |
Front Axle/Diff Fluid Capacity | 9.2 gal ( 35 l ) |
Fuel Capacity | 51.5 gal ( 195 l ) |
Hydraulic System Fluid Capacity | 23.8 gal ( 90 l ) |
Operating Weight | 34,129.0 lbs ( 15,481 kg ) |
Rated Bucket Capacity | 3 - 7 cu yd ( 3 cu m ) |
Reach - Full Lift and 45 degrees Dump | 3.8 ft ( 1 m ) |
Rear Axle/Diff Fluid Capacity | 9.2 gal ( 35 l ) |
Static Tipping Load - Full Turn | 20,997.0 lbs ( 9,524 kg ) |
Tire Size | 20.5 |
Transmission Fluid Capacity | 2.9 gal ( 11 l ) |
Service Refill Capacities | |
Cooling System | 7.9 gal ( 30 l ) |
Crankcase | 5.3 gal ( 20 l ) |
Front | 9.2 gal ( 35 l ) |
Fuel Tank | 51.5 gal ( 195 l ) |
Hydraulic Tank | 23.8 gal ( 90 l ) |
Rear | 9.2 gal ( 35 l ) |
Transmission | 2.9 gal ( 11 l ) |
Steering System | |
Maximum Working Pressure | 3,500.0 psi |
Steering Angle - Each Direction | 40 deg |
Steering Articulation | 40 deg |
Steering Cylinder, Two, Bore | 3.1 in ( 8 cm ) |
Tires | |
Size | 20.5 R25 radial (L-3) |
Transmission | |
2 Forward | 8.0 mph ( 13 kph ) |
3 Forward | 17.0 mph ( 27 kph ) |
4 Forward | 25.0 mph ( 40 kph ) |
Forward - 1 | 8.0 mph ( 13 kph ) |
Max Speed - Forward | 25.0 mph ( 40 kph ) |
Max Speed - Reverse | 25.0 mph ( 40 kph ) |
Number of Forward Gears | 4.0 |
Number of Reverse Gears | 4.0 |
Reverse - 1 | 8.0 mph ( 13 kph ) |
Weights | |
Operating Weight | 35,104.0 lbs ( 15,923 kg ) |
Operational Weight | 35,104.0 lbs ( 15,923 kg ) |