List Your Equipment For Free  /  Seller Login

Caterpillar 972H For Sale in Salem, VA



For Sale: $98,000.00 USD

Apply for Financing

Machine Info:

Hours:21504
Serial Number:A7D00434
Machine Location:SALEM, VA
More Information:https://catused.com/cu/10142785

Description:

972H WHEEL LOADER, BUCKET-MH, 5.75 CYD, CUTTING EDGE, BOLT ON, Engine, GUARD, POWERTRAIN, INSTRUCTION,NORTH AMERICA, ANSI, Online Owner's Manual , PACKAGE, VALUE (SW), RADIO, CB (READY), RECEPTACLE, STARTING, REMOTE, PRESSURE TAPS, RIDE CONTROL, 2 VALVE, RIMS ONLY, TIRES OMITTED, TC, TD, RETARDER, TRANSMISSION AND DRIVE LINE

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)No
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
Safety Decals In PlaceYes
Safety Decals LegibleNo
OPERATOR STATION
Safety Decals Legible50%
ENGINE
Apparent Other Engine DamageNo
Fuel LeaksNo
Oil LeaksYes
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
WiringGood
TRANSMISSION
Mag Screens CheckedNo
Transmission - NoisyNo
STEERING
Articulate P & BFair
Hand Metering UnitGood
PumpsGood
Steering CylinderFair
Steering LinkageGood
Steering Wheel Tilt / ExtendFair
BRAKE
Holds In ParkYes
HYDRAULICS
Leaks - HYDRAULICSYes
BUCKET
Bucket BottomFair
Bucket FloorFair
Bucket Linkage - BUCKETFair
Bucket P & BFair
Bucket SidesFair
Cutting EdgesPoor
Loader FrameFair
Loader Pins & BushingsFair
TIRES
SpareNo


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
FrontFixed front
Maximum Single-Wheel Rise and Fall19.8 in  ( 50 cm )
RearOscillating +/- 13?
Brakes
BrakesMeets required standards.
Bucket
Breakout Force51,750.0 lbs  ( 23,473 kg )
Bucket Capacities6.0 cu yd  ( 5 cu m )
Bucket Capacity - heaped6.0 cu yd  ( 5 cu m )
Bucket Capacity - struck5.3 cu yd  ( 4 cu m )
Bucket Width10.4 ft  ( 3 m )
Dump Clearance at Max Raise10.7 ft  ( 3 m )
Maximum Bucket Capacity6.0 cu yd  ( 5 cu m )
Cab
ROPS/FOPSMeets SAE and ISO standards.
Dimensions
B-Pin Height - Standard14.7 ft  ( 4 m )
Centerline of Rear Axle to Hitch68.0 in  ( 173 cm )
Centerline Rear Axle to Edge of Counterweight8.1 ft  ( 2 m )
Ground Clearance1.7 ft  ( 1 m )
Height - Top of Cab11.9 ft  ( 4 m )
Height - Top of Exhaust140.1 in  ( 356 cm )
Height - Top of Hood105.6 in  ( 268 cm )
Height - Top of ROPS/FOPS11.9 ft  ( 4 m )
Hinge Pin - Max Height14.7 ft  ( 4 m )
Length with Bucket on Ground30.0 ft  ( 9 m )
Reach at Max Lift and Dump4.3 ft  ( 1 m )
Wheel Base11.4 ft  ( 3 m )
Wheelbase11.4 ft  ( 3 m )
Width Over Tires9.7 ft  ( 3 m )
Engine
Bore5.2 in  ( 13 cm )
Displacement762.8 cu in  ( 12,500 cu cm )
Engine ModelCat C13 ACERT
Flywheel Power287.0 hp  ( 214 kw )
Gross Power311.0 hp  ( 232 kw )
Gross Power - SAE J1995311.0 hp  ( 232 kw )
MakeCat
ModelC13
Net Power287.0 hp  ( 214 kw )
Net Power - 80/1269/EEC287.0 hp  ( 214 kw )
Net Power - ISO 9249287.0 hp  ( 214 kw )
Net Power - SAE J1349284.0 hp  ( 212 kw )
Peak Torque - 1,400 rpm - Net983.0 lbs ft  ( 1,333 nm )
Power Measured @1,800.0 rpm
Stroke6.2 in  ( 16 cm )
Torque Measured @1,400.0 rpm
Hydraulic System
Bucket/Work Tool System - Pump Output80.6 gpm  ( 305 lpm )
Dump Time2.1 seconds
Hydraulic Cycle Time - Dump2.1 seconds
Hydraulic Cycle Time - Lower, Empty, Float Down2.4 seconds
Hydraulic Cycle Time - Raise5.9 seconds
Hydraulic Cycle Time - Total10.4 seconds
Lower Time2.4 seconds
Pump Flow Capacity80.6 gpm  ( 305 lpm )
Pump TypePiston
Raise Time5.9 seconds
Relief Valve Setting1,000.0 psi
Steering System - Pump TypePiston
Operating Specifications
Alternator Supplied Amperage80 amps
Breakout Force51,750.0 lbs  ( 23,473 kg )
Cooling System Fluid Capacity10.3 gal  ( 39 l )
Dump Clearance10,357.6 ft  ( 3,157 m )
Engine Oil Fluid Capacity9.3 gal  ( 35 l )
Front Axle/Diff Fluid Capacity16.9 gal  ( 64 l )
Fuel Capacity100.4 gal  ( 380 l )
Hydraulic System Fluid Capacity29.0 gal  ( 110 l )
Operating Voltage24.0 volts
Operating Weight55,451.0 lbs  ( 25,152 kg )
Rated Bucket Capacity6.0 cu yd  ( 5 cu m )
Rear Axle Oscillation26 deg
Rear Axle/Diff Fluid Capacity16.9 gal  ( 64 l )
Static Tipping Load - Full Turn37,271.0 lbs  ( 16,906 kg )
Static Tipping Weight42,043.0 lbs  ( 19,070 kg )
Tire Size26.5-25
Transmission Fluid Capacity9.3 gal  ( 35 l )
Turning Radius24.0 ft  ( 7 m )
Service Refill Capacities
Cooling System10.3 gal  ( 39 l )
Crankcase9.3 gal  ( 35 l )
Differential - Final Drives - Front16.9 gal  ( 64 l )
Differential - Final Drives - Rear16.9 gal  ( 64 l )
Fuel Tank - Standard100.4 gal  ( 380 l )
Hydraulic Tank29.0 gal  ( 110 l )
Transmission9.3 gal  ( 35 l )
Tires
TiresChoose from a variety of tires to match your application.
Transmission
Forward - 14.5 mph  ( 7 kph )
Forward - 27.8 mph  ( 13 kph )
Forward - 313.3 mph  ( 21 kph )
Forward - 422.9 mph  ( 37 kph )
Max Speed - Forward22.9 mph  ( 37 kph )
Max Speed - Reverse24.0 mph  ( 39 kph )
Number of Forward Gears4.0
Number of Reverse Gears4.0
Reverse - 15.1 mph  ( 8 kph )
Reverse - 28.8 mph  ( 14 kph )
Reverse - 315.1 mph  ( 24 kph )
Reverse - 424.0 mph  ( 39 kph )
Transmission TypePowershift
Weights
Operating Weight55,451.0 lbs  ( 25,152 kg )
Operational Weight54,908.0 lbs  ( 24,906 kg )

Dealer Contact Info:

Carter Machinery

Fax: 540-387-1692



Contact: Tim Eldridge

Click for Phone Number


veritread button





39.95234 \\ -75.16379 \\ Fort Washington \\ PA