Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $74,500.00 USD
Apply for FinancingHours: | 26294 |
Serial Number: | W7K00863 |
Machine Location: | ABILENE, TX |
More Information: | https://catused.com/cu/10152386 |
Supplied by HeavyEquipmentData.com →
Axles | |
Front | Fixed |
Maximum Single-Wheel Rise and Fall | 21.6 in ( 55 cm ) |
Rear | Oscillating ?13 deg |
Brakes | |
Brakes | Meet OSHA SAE J1473 OCT90 and ISO 3450-1985 required standards |
Bucket | |
Breakout Force | 61,425.0 lbs ( 27,862 kg ) |
Bucket Capacities | 5 - 16 cu yd ( 4 cu m ) |
Bucket Capacity - heaped | 5.5 cu yd ( 4 cu m ) |
Bucket Capacity - struck | 4.8 cu yd ( 4 cu m ) |
Bucket Width | 11.6 ft ( 4 m ) |
Dump Clearance at Max Raise | 10.9 ft ( 3 m ) |
Cab | |
ROPS/FOPS | Meets SAE and ISO standards |
Dimensions | |
Ground Clearance | 1.5 ft ( 0 m ) |
Height - Top of Cab | 12.4 ft ( 4 m ) |
Hinge Pin - Max Height | 14.8 ft ( 5 m ) |
Length with Bucket on Ground | 31.1 ft ( 9 m ) |
Reach at Max Lift and Dump | 5.1 ft ( 2 m ) |
Wheelbase | 12.2 ft ( 4 m ) |
Width Over Tires | 10.6 ft ( 3 m ) |
Engine | |
Bore | 5.1 in ( 13 cm ) |
Displacement | 762.8 cu in ( 12,500 cu cm ) |
Engine Model | Cat C13 ACERT |
Gross Power | 355.0 hp ( 265 kw ) |
Maximum Gross Power - ISO 14396 | 402.0 hp ( 300 kw ) |
Maximum Net Power - 1,800 rpm - EEC 80/1269 | 369.0 hp ( 275 kw ) |
Maximum Net Power - 1,800 rpm - EEC 80/1269 - Metric | 373.0 hp ( 278 kw ) |
Net Power | 369.0 hp ( 275 kw ) |
Net Power - ISO 9249 | 369.0 hp ( 275 kw ) |
Number of Cylinders | 6.0 |
Power Measured @ | 1,800.0 rpm |
Stroke | 6.2 in ( 16 cm ) |
Hydraulic System | |
Dump Time | 2.1 seconds |
Hydraulic Cycle Time - Dump, at Maximum Raise | 1.7 seconds |
Hydraulic Cycle Time - Lower, Empty, Float Down | 3.3 seconds |
Hydraulic Cycle Time - Raise from Carry Position | 6.4 seconds |
Hydraulic Cycle Time - Total | 11.4 seconds |
Implement System - Maximum Operating Pressure | 4,496.0 psi |
Implement System - Optional 3rd Function Maximum Flow | 79.3 gpm ( 300 lpm ) |
Implement System - Optional 3rd Function Maximum Pressure | 3,000.0 psi |
Lower Time | 3.4 seconds |
Pump Flow Capacity | 123.0 gpm ( 466 lpm ) |
Pump Type | Gear |
Raise Time | 6.0 seconds |
Relief Valve Setting | 3,000.0 psi |
Steering System - Pump Type | Piston |
Operating Specifications | |
Alternator Supplied Amperage | 80 amps |
Breakout Force | 53,548.0 lbs ( 24,289 kg ) |
Cooling System Fluid Capacity | 22.0 gal ( 83 l ) |
Engine Oil Fluid Capacity | 10.0 gal ( 38 l ) |
Front Axle/Diff Fluid Capacity | 23.0 gal ( 87 l ) |
Fuel Capacity | 127.0 gal ( 481 l ) |
Hydraulic System Fluid Capacity | 66.0 gal ( 250 l ) |
Operating Voltage | 24.0 volts |
Operating Weight | 66,489.3 lbs ( 30,159 kg ) |
Rear Axle Oscillation | 26 deg |
Rear Axle/Diff Fluid Capacity | 23.0 gal ( 87 l ) |
Static Tipping Weight | 50,201.0 lbs ( 22,771 kg ) |
Tire Size | 29.5-25 |
Transmission Fluid Capacity | 16.0 gal ( 61 l ) |
Turning Radius | 26.1 ft ( 8 m ) |
Service Refill Capacities | |
Cooling System | 16.6 gal ( 63 l ) |
Crankcase | 9.8 gal ( 37 l ) |
Differential - Final Drives - Front | 22.2 gal ( 84 l ) |
Differential - Final Drives - Rear | 22.2 gal ( 84 l ) |
Fuel Tank - Standard | 118.1 gal ( 447 l ) |
Hydraulic Tank | 44.9 gal ( 170 l ) |
Transmission | 17.4 gal ( 66 l ) |
Sound | |
Standards | Standards |
Tires | |
Note (1) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Note (2) | Other special tires are available on request. |
Note (3) | In certain applications the loader's productive capabilities might exceed the tires' tonnes-km/h (ton-) capabilities. |
Tires | Choices |
Transmission | |
Max Speed - Forward | 22.6 mph ( 36 kph ) |
Max Speed - Reverse | 25.8 mph ( 42 kph ) |
Number of Forward Gears | 4.0 |
Number of Reverse Gears | 4.0 |
Transmission Type | Powershift |
Weights | |
Operating Weight | 68,862.0 lbs ( 31,235 kg ) |