Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $245,000.00 USD
Apply for FinancingSerial Number: | BXY04045 |
Machine Location: | OAK RIDGE, NJ |
Supplied by HeavyEquipmentData.com →
Axles | |
Front | Fixed |
Maximum Single-Wheel Rise and Fall | 22.4 in ( 57 cm ) |
Rear | Oscillating 13 deg |
Bucket | |
Breakout Force | 85,068.0 lbs ( 38,586 kg ) |
Bucket Capacities | 10.0 cu yd ( 8 cu m ) |
Bucket Capacity - heaped | 8.4 cu yd ( 6 cu m ) |
Bucket Capacity - struck | 6.9 cu yd ( 5 cu m ) |
Bucket Width | 12.5 ft ( 4 m ) |
Maximum Bucket Capacity | 10.0 cu yd ( 8 cu m ) |
Cab | |
Cab - ROPS/FOPS | Meets SAE and ISO standards |
Sound Performance | Meets ANSI SAE and ISO standards |
Dimensions | |
Height - Top of Cab | 13.5 ft ( 4 m ) |
Height - Top of Exhaust | 13.5 ft ( 4 m ) |
Hinge Pin - Max Height | 19.2 ft ( 6 m ) |
Length with Bucket on Ground | 40.1 ft ( 12 m ) |
Reach at Max Lift and Dump | 6.7 ft ( 2 m ) |
Wheel Base Length | 15.0 ft ( 5 m ) |
Wheelbase | 14.9 ft ( 5 m ) |
Width Over Tires | 11.8 ft ( 4 m ) |
Engine | |
Bore | 5.7 in ( 14 cm ) |
Displacement | 1,104.5 cu in ( 18,100 cu cm ) |
Engine Model | Cat C18 ACERT |
Flywheel Power | 501.0 hp ( 374 kw ) |
Gross Power | 555.0 hp ( 414 kw ) |
Gross Power - ISO 3046-2 | 520.0 hp ( 388 kw ) |
Make | Cat |
Net Power - EEC 80/1269 | 501.0 hp ( 374 kw ) |
Net Power - ISO 9249 | 501.0 hp ( 374 kw ) |
Number of Cylinders | 6.0 |
Power Measured @ | 1,800.0 rpm |
Stroke | 7.2 in ( 18 cm ) |
Hydraulic Cycle Times | |
Dump | 2.4 seconds |
Raise | 9.4 seconds |
Total Hydraulic Cycle Time | 15.6 seconds |
Hydraulic System | |
Dump Time | 2.4 seconds |
Lower Time | 3.8 seconds |
Pump Flow Capacity | 130.0 gpm ( 492 lpm ) |
Raise Time | 9.4 seconds |
Relief Valve Setting | 4,500.0 psi |
Loader Hydraulic System | |
Relief Valve Setting | 5,075.0 psi |
Relief Valve Setting - Low Idle | 348.1 psi |
Operating Specifications | |
Alternator Supplied Amperage | 100 amps |
Cooling System Fluid Capacity | 27.2 gal ( 103 l ) |
Engine Oil Fluid Capacity | 15.9 gal ( 60 l ) |
Front Axle/Diff Fluid Capacity | 49.0 gal ( 185 l ) |
Fuel Capacity | 188.0 gal ( 712 l ) |
Hinge Pin Height, Unloaded | 16.2 ft ( 5 m ) |
Hydraulic System Fluid Capacity | 70.5 gal ( 267 l ) |
Operating Voltage | 24.0 volts |
Rated Payload | 27,557.8 lbs ( 12,500 kg ) |
Rear Axle Oscillation | 26 deg |
Rear Axle/Diff Fluid Capacity | 49.0 gal ( 185 l ) |
Static Tipping Weight | 76,776.0 lbs ( 34,825 kg ) |
Tire Size | 35/65 |
Transmission Fluid Capacity | 18.5 gal ( 70 l ) |
Turning Radius | 28.0 ft ( 9 m ) |
Service Refill Capacities | |
Cooling System | 27.2 gal ( 103 l ) |
Crankcase | 15.9 gal ( 60 l ) |
Differential - Final Drives - Front | 49.0 gal ( 185 l ) |
Differential - Final Drives - Rear | 49.0 gal ( 185 l ) |
Fuel Tank | 188.0 gal ( 712 l ) |
Hydraulic System - Tank Only | 70.5 gal ( 267 l ) |
Hydraulic System Factory Fill | 124.2 gal ( 470 l ) |
Transmission | 18.5 gal ( 70 l ) |
Steering System | |
Steering | Meets SAE and ISO standards |
Transmission | |
Converter Drive - Forward 1 | 4.2 mph ( 7 kph ) |
Converter Drive - Forward 2 | 7.3 mph ( 12 kph ) |
Converter Drive - Forward 3 | 12.9 mph ( 21 kph ) |
Converter Drive - Reverse 1 | 4.7 mph ( 8 kph ) |
Converter Drive - Reverse 2 | 8.4 mph ( 14 kph ) |
Converter Drive - Reverse 3 | 14.7 mph ( 24 kph ) |
Direct Drive - Forward 2 | 7.7 mph ( 12 kph ) |
Direct Drive - Forward 3 | 13.6 mph ( 22 kph ) |
Direct Drive - Forward 4 | 24.0 mph ( 39 kph ) |
Direct Drive - Reverse 1 | 4.9 mph ( 8 kph ) |
Direct Drive - Reverse 2 | 8.8 mph ( 14 kph ) |
Direct Drive - Reverse 3 | 15.6 mph ( 25 kph ) |
Max Speed - Forward | 24.0 mph ( 39 kph ) |
Max Speed - Reverse | 15.6 mph ( 25 kph ) |
Number of Forward Gears | 4.0 |
Number of Reverse Gears | 3.0 |
Weights | |
Operating Weight | 128,328.0 lbs ( 58,209 kg ) |