List Your Equipment For Free  /  Seller Login

2014 Caterpillar 988K For Sale in Australia, AUS



Auction Pricing



Click here to place a bid

Machine Info:

Hours:27249
Serial Number:CAT0988KATWX00313
Machine Location:AUSTRALIA, AUS

Description:

Enclosed Cab, Air Conditioner, Rear View Camera, Ride Control, Autoshift, Joystick Steering, Fire Suppression System, E-Stops, Fast Fuel System, 35/65R33 Tires LOCATED-IN-PERTH-WA, - THE CLOSING TIMES OF LOT#'s 300, 301 & 302, ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME-EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER. Closing Time: 2024-11-27 12:36:00 PM


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
FrontFixed
RearTrunnion
Brakes
BrakesSAE J1473 OCT90 ISO 3450:1992
Engine
Bore5.7 in  ( 14 cm )
Displacement1,105.0 cu in  ( 18,108 cu cm )
Engine ModelCat C18 ACERT
Gross - ISO 14396580.0 hp  ( 433 kw )
MakeCat
ModelC18 ACERT
Net Power541.0 hp  ( 403 kw )
Net Power - SAE J1349541.0 hp  ( 403 kw )
Peak Power Speed - 1,500 rpm - Gross - ISO 14396580.0 hp  ( 433 kw )
Peak Power Speed - 1,500 rpm - Gross - SAE J1995588.0 hp  ( 438 kw )
Peak Power Speed - 1,500 rpm - Net Power - SAE J1349541.0 hp  ( 403 kw )
Peak Torque - 1,200 rpm2,104.0 lbs ft  ( 2,853 nm )
Rated Speed1,700.0 rpm
Stroke7.2 in  ( 18 cm )
Torque Rise58%
General Specifications
?Model988K
Breakout Force87,122.0 lbf
Bucket Capacity6.2.17 cu yd
Bucket Capacity cu. yd. (cu m)6.5 - 13.5 (5.0 - 10.3)
CategoryWheel Loaders
EngineC18
Engine Power hp (kw)541 (403)
Engine typeCat C18
Full-Turn Tip Load79,435.0 lbs  ( 36,031 kg )
Full-Turn Tipping Load79,435.0 lbs  ( 36,031 kg )
Max Dump Height ft. (m)11.3 (3.4)
Max Dump Height ft.( m)6.8 (2.1)
Net Power538.0 hp  ( 401 kw )
Operating Weight112,574.0 lbs  ( 51,063 kg )
Operating?Weight112,574 (51,063)
Operating?Weight lbs. (kg)112,574 (51,063)
Tip Load63,404 (28,760)
Travel Speed (Fwd/Rev)24 / 25.4 mph
Travel Speed24 / 25.4 mph
Hydraulic Cycle Times
Dump2.2 seconds
Lower Float Down3.5 seconds
Rack Back4.5 seconds
Raise8.0 seconds
Total Hydraulic Cycle Time - Empty Bucket18.2 seconds
Hydraulic System - Lift/Tilt
Lift/Tilt SystemVariable displacement piston
Maximum Flow at 1,400-1,860 rpm153.0 gpm  ( 579 lpm )
Pilot SystemVariable displacement piston
Hydraulic System - Steering
Steering Cycle Times - High Idle3.4 seconds
Steering Cycle Times - Low Idle5.6 seconds
Steering System - CircuitPilot load sensing
Steering System - PumpPiston variable displacement
Operating Specifications
Cat Truck Match - High Lift773-775
Cat Truck Match - Standard770-772
Rated Bucket Capacity8 - 10 cu yd  ( 6 cu m )
Rated Payload27,557.8 lbs  ( 12,500 kg )
Rated Payload - High Lift27,557.8 lbs  ( 12,500 kg )
Rated Payload - Standard27,557.8 lbs  ( 12,500 kg )
Tipping Load - Articulated 37 degrees68,005.0 lbs  ( 30,847 kg )
Tipping Load - Straight78,115.0 lbs  ( 35,432 kg )
Service Refill Capacities
Cooling System31.7 gal  ( 120 l )
Crankcase15.9 gal  ( 60 l )
Diesel Exhaust Fluid Tank8.7 gal  ( 33 l )
Differential - Final Drives - Front49.1 gal  ( 186 l )
Differential - Final Drives - Rear49.1 gal  ( 186 l )
Hydraulic System - Tank Only63.4 gal  ( 240 l )
Hydraulic System Factory Fill125.5 gal  ( 475 l )
Transmission31.7 gal  ( 120 l )
Sound Performance - Standard
Machine Sound Level (ISO 6395)111 dB(A)
Operator Sound Level (ISO 6396)71 dB(A)
Sound Performance - Suppression
Machine Sound Level (ISO 6395)109 dB(A)
Operator Sound Level (ISO 6396)70 dB(A)
Transmission
Direct Drive - Forward 1Lock-up disabled
Transmission TypeCat planetary power shift

Dealer Contact Info:

Ritchie Bros. Auctioneers




Contact:

Click for Phone Number


veritread button





39.95234 \\ -75.16379 \\ Fort Washington \\ PA