Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $35,000.00 USD
Apply for FinancingHours: | 11375 |
Serial Number: | 8CR02634 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10103923 |
Supplied by HeavyEquipmentData.com →
Bucket | |
Bucket Width | 8.4 ft ( 3 m ) |
Digging depth | 0.4 ft ( 0 m ) |
Dump Clearance at Max Raise | 9.8 ft ( 3 m ) |
Dumping angle, top | 45 deg |
Dimensions | |
Dump Clearance at Max Lift | 9.6 ft ( 3 m ) |
Fork Tine Length | 4.0 ft ( 1 m ) |
Ground Clearance | 1.4 ft ( 0 m ) |
Height - Top of Cab | 10.8 ft ( 3 m ) |
Hinge Pin - Max Height | 13.1 ft ( 4 m ) |
Hinge Pin Max Height | 13.1 ft ( 4 m ) |
Length w/ Bucket on Ground | 24.1 ft ( 7 m ) |
Length with out Forks on Ground | 24.8 ft ( 8 m ) |
Length with Bucket on Ground | 23.9 ft ( 7 m ) |
Max Lift Height | 12.7 ft ( 4 m ) |
Reach at Max Height and Dump | 3.4 ft ( 1 m ) |
Reach at Max Lift and Dump | 3.2 ft ( 1 m ) |
Wheelbase | 9.6 ft ( 3 m ) |
Width Over Tires | 8.4 ft ( 3 m ) |
Engine | |
Bore | 4.0 in ( 10 cm ) |
Displacement | 366.2 cu in ( 6,001 cu cm ) |
Engine Model | 3116T |
Gross Power | 156.0 hp ( 116 kw ) |
Net Power | 145.0 hp ( 108 kw ) |
Power Measured @ | 2,300.0 rpm |
Stroke | 5.0 in ( 13 cm ) |
Hydraulic System | |
Dump Time | 1.4 seconds |
Lower Time | 2.8 seconds |
Pump Flow Capacity | 27.5 gpm ( 104 lpm ) |
Raise Time | 6.1 seconds |
Relief Valve Setting | 3,002.3 psi |
Operating Specifications | |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 11.1 gal ( 42 l ) |
Engine Oil Capacity | 4.3 gal ( 16 l ) |
Front Axle/Diff Fluid Capacity | 6.9 gal ( 26 l ) |
Front Diff Fluid Capacity | 6.9 gal ( 26 l ) |
Fuel Capacity | 57.1 gal ( 216 l ) |
Hydraulic System Fluid Capacity | 33.1 gal ( 125 l ) |
Operating Voltage | 24.0 volts |
Rear Axle Oscillation | 11 deg |
Rear Axle/Diff Fluid Capacity | 6.7 gal ( 25 l ) |
Rear Diff Fluid Capacity | 6.7 gal ( 25 l ) |
Static Tipping Load - Bucket | 19,916.6 lbs ( 9,034 kg ) |
Static Tipping Load - Material Handler | 11,805.8 lbs ( 5,355 kg ) |
Tire Size | 20.5R25 L3 XHA |
Transmission Fluid Capacity | 9.2 gal ( 35 l ) |
Turning Radius | 16.7 ft ( 5 m ) |
Transmission | |
Max Speed - Forward | 37.7 mph ( 61 kph ) |
Max Speed - Reverse | 25.8 mph ( 42 kph ) |
Max Speed Forward | 23.7 mph ( 38 kph ) |
Max Speed Reverse | 16.2 mph ( 26 kph ) |
Number of Forward Gears | 4.0 |
Number of Reverse Gears | 3.0 |