Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2024-12-04Click here to place a bid Minimum Bid: $1
Supplied by HeavyEquipmentData.com →
3-Point Hitch | |
Category | Category 1 |
Lift capacity (24-in. behind link arms) | 615.0 kg ( 1,356 lbs ) |
Dimensions | |
Shipping weight | 1,105.0 kg ( 2,436 lbs ) |
Turning radius without brakes | 9.1 ft ( 3 m ) |
Wheelbase | 67.9 ft ( 21 m ) |
Electrical System | |
Alternator (12-V) | 85 amp |
Battery size | 500 CCA |
Starter size | 1.9 hp ( 1 kw ) |
Engine | |
Air cleaner | Dual element |
Aspiration | Natural |
Bore | 3.5 in ( 9 cm ) |
Compression ratio | 19.1:1 |
Cooling system | Water pump |
Cylinder liners | Cast-In-Block |
Displacement | 100.3 cu in ( 1,644 cu cm ) |
Emissions compliance | Final Tier 4 |
Engine Manufacturer | Yanmar |
Engine Model | 3TNV88C-NJT |
Engine torque at rated speed | 86 Nm |
Engine Type | Direct Injection |
Family | GYDXL1.64NDA |
Fuel tank capacity | 8.5 gal ( 32 l ) |
Gross Power | 31.3 hp ( 23 kw ) |
Injection pump type | Direct Injection |
Lubrication | Pressurized |
Number of Cylinders | 3.0 |
Power take-off (PTO) power | 24.2 hp ( 18 kw ) |
Rated engine speed | 2,500.0 rpm |
Stroke | 3.6 in ( 9 cm ) |
Final Drive | |
Differential lock | Yes |
Final Drive Type | Spur Gear |
Fluid Capacities | |
Crankcase with filter | 4.5 L |
Fuel System | |
Fuel System Type | Direct Injection |
Hydraulic System | |
Draft control sensing | Position control |
Hydraulic Type | Open Center |
Maximum operating pressure | 2,500.0 psi |
Pump rated output | Steering - 15 L/min Implement - 20.2 L/min |
Pump Type | Gear |
Remote control valves available | Up to three |
Operator Station | |
Gear shift location - console/floor | Left Hand Side |
Platform - flat/straddle | Flat |
Rollover protective structure | Foldable ASABE S478 |
Power Take-Off (PTO) | |
Brake (for mid and rear PTO) | Wet disc |
Clutch | Independent |
Control | Independent |
Standard | Rear - 540 rpm Mid - 2000 rpm |
Tires | |
Front Tires Size | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
Rear Tires Size | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
Transmission | |
Axle capacity | Front - 880 kg Rear - 1089 kg |
Brakes | Wet disc |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Final Drive Type | Bull Gear |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Steering | Power steering |