Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: Auction Pricing
Hours: | 8234 |
Serial Number: | 51541 |
Machine Location: | STARK CITY, MO |
More Information: | https://www.purplewave.com/auction/240924/item/NX9096 |
Supplied by HeavyEquipmentData.com →
Blades | |
Maximum Shoulder Reach Outside of Tires - Left | 79.0 in ( 201 cm ) |
Maximum Shoulder Reach Outside of Tires - Right | 79.0 in ( 201 cm ) |
Moldboard Sideshift - Left | 25.0 in ( 64 cm ) |
Moldboard Sideshift - Right | 25.0 in ( 64 cm ) |
Circle | |
Blade Tip Angle - Front | 40 deg |
Blade Tip Angle - Rear | 5 deg |
Diameter | 60.2 in ( 153 cm ) |
Max Lift Above Ground | 19.9 in ( 51 cm ) |
Rotation | 360 deg |
Shift Left | 24.2 in ( 61 cm ) |
Shift Right | 24.2 in ( 61 cm ) |
Dimensions | |
Blade Base | 8.5 ft ( 3 m ) |
Height to Top of Isomount Cab | 10.3 ft ( 3 m ) |
Overall Length | 33.8 ft ( 10 m ) |
Tandem Axle Wheelbase | 5.0 ft ( 2 m ) |
Wheelbase | 20.0 ft ( 6 m ) |
Width Over Tires | 8.4 ft ( 3 m ) |
Engine | |
Aspiration | Turbocharged and air-to-air aftercooled |
Base Power (1st Gear) - Net | 180.0 hp ( 134 kw ) |
Displacement | 505.0 cu in ( 8,275 cu cm ) |
Engine Model | SAA6D114E-3 |
Max Power | 200.0 hp ( 149 kw ) |
Net Power Gear 1-2 | 180.0 hp ( 134 kw ) |
Net Power Gear 4-6 | 200.0 hp ( 149 kw ) |
Net Power Gear 5-6 | 200.0 hp ( 149 kw ) |
Net Power Gears 7-8 | 200.0 hp ( 149 kw ) |
Net Torque Gears 1-2 | 612.0 lbs ft ( 830 nm ) |
Net Torque Gears 3-4 | 719.0 lbs ft ( 975 nm ) |
Net Torque Gears 5-6 | 719.0 lbs ft ( 975 nm ) |
Net Torque Gears 7-8 | 719.0 lbs ft ( 975 nm ) |
Number of Cylinders | 6.0 |
Power Measured @ | 1,900.0 rpm |
Torque Measured @ | 1,400.0 rpm |
Front Axle | |
Ground Clearance | 24.8 ft ( 8 m ) |
Oscillation - Total | 32 deg |
Wheel Lean | 20 deg |
Hydraulic System | |
Pump Flow | 51.0 gpm ( 193 lpm ) |
Pump Type | Load-sensing closed center hydraulics with variable displacement piston pump |
Relief Valve Pressure | 3,000.0 psi |
Moldboard | |
Max Depth of Cut | 32.1 in ( 82 cm ) |
Moldboard Height | 26.0 in ( 66 cm ) |
Moldboard Length | 12.0 ft ( 4 m ) |
Moldboard Thickness | 0.9 in ( 2 cm ) |
Moldboard Width | 12.0 ft ( 4 m ) |
Side Shift Left | 32.3 in ( 82 cm ) |
Side Shift Right | 32.3 in ( 82 cm ) |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Circle Gearbox Fluid Capacity | 1.3 gal ( 5 l ) |
Cooling System Fluid Capacity | 10.4 gal ( 39 l ) |
Fuel Capacity | 89.9 gal ( 340 l ) |
Hydraulic System Fluid Capacity | 26.4 gal ( 100 l ) |
Oil System Fluid Capacity | 8.0 gal ( 30 l ) |
Operating Voltage | 24.0 volts |
Operating Weight | 37,801.0 lbs ( 17,146 kg ) |
Std Operation Weight - Front Axle | 9,039.0 lbs ( 4,100 kg ) |
Std Operation Weight - Rear Axle | 24,912.3 lbs ( 11,300 kg ) |
Std Operation Weight - Total | 33,951.2 lbs ( 15,400 kg ) |
Tandem Case Fluid Capacity (each) | 21.9 gal ( 83 l ) |
Tire Size | low pressure, tubeless, 17.5R25 |
Transmission Fluid Capacity | 11.9 gal ( 45 l ) |
Steering System | |
Articulation Angle | 23 deg |
Turning Radius | 22.7 ft ( 7 m ) |
Transmission | |
Max Speed - Forward | 26.2 mph ( 42 kph ) |
Max Speed - Reverse | 23.9 mph ( 38 kph ) |
Number of Gears - Forward | 8.0 |
Number of Gears - Reverse | 4.0 |
Transmission Type | Full power shift transmission |