Equipment ↠ Komatsu ↠ Wheel Loaders ↠ THIS 2015 Komatsu WA200-7

2015 Komatsu WA200-7 For Sale in South Mills, NC

Name: 2015 Komatsu WA200-7
Brand: Komatsu
Price: 69500 USD
Availability: InStock

❮

❯

For Sale: $69,500.00 USD

Apply for Financing

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Machine Info:

Serial Number:	CEG-80338
Stock Number:	CEG-13-8531
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat and A/C, hydraulic quick coupler, bucket and forks, matching radials with 80% plus or minus remaining, aux hydraulics, tight, clean and original loader with no damage, rust or leaks. One owner machine that starts easy, burns clean and shifts as it should.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Breakout Force	24,250.2 lbs ( 11,000 kg )
Bucket Width	8.4 ft ( 3 m )
Dump Clearance at Max Raise	9.8 ft ( 3 m )
Dimensions
Ground Clearance	1.7 ft ( 1 m )
Hinge Pin - Max Height	12.8 ft ( 4 m )
Length with Bucket on Ground	23.3 ft ( 7 m )
Reach at Max Lift and Dump	3.2 ft ( 1 m )
Wheelbase	9.4 ft ( 3 m )
Width Over Tires	8.2 ft ( 3 m )
Engine
Aspiration	Turbocharged
Bore	4.3 in ( 11 cm )
Displacement	272.2 cu in ( 4,461 cu cm )
Emissions Certification	IIIB/EPA Tier 4 interim
Engine Make	Komatsu
Engine Model	SAA4D107E-2
Gross Power	128.0 hp ( 95 kw )
Model	SAA4D107E-2
Net Power	126.0 hp ( 94 kw )
Number of Cylinders	4.0
Power Measured @	2,000.0 rpm
Stroke	4.9 in ( 12 cm )
General Specifications
?Model	WA200-7
Bucket Capacity cu. yd. (cu m)	2.2 - 3.1 (1.7 - 2.4)
Category	Wheel Loaders
Engine Power hp (kw)	126 (94)
Engine type	SAA4D107E-2
Max Dump Height ft. (m)	9.8 (3.0)
Operating?Weight	25,199 - 26,070 (11,430 - 11,825)
Hydraulic System
Dump Time	1.9 seconds
Lower Time	3.2 seconds
Pump Flow Capacity	22.5 gpm ( 85 lpm )
Pump Type	Gear type pump
Raise Time	5.7 seconds
Relief Valve Setting	20.6 Mpa
Operating Specifications
Alternator Supplied Amperage	60 amps
Cooling System Fluid Capacity	6.5 gal ( 25 l )
Engine Oil Fluid Capacity	4.1 gal ( 16 l )
Front Axle/Diff Fluid Capacity	4.9 gal ( 19 l )
Fuel Capacity	46.8 gal ( 177 l )
Hydraulic System Fluid Capacity	15.4 gal ( 58 l )
Operating Voltage	24.0 volts
Operating Weight	25,342.2 lbs ( 11,495 kg )
Rated Bucket Capacity	2.6 cu yd ( 2 cu m )
Rear Axle/Diff Fluid Capacity	4.8 gal ( 18 l )
Tire Size	20.5 R25
Transmission Fluid Capacity	1.4 gal ( 5 l )
Turning Radius	16.1 ft ( 5 m )
Transmission
Max Speed - Forward	23.7 mph ( 38 kph )
Max Speed - Reverse	23.7 mph ( 38 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	4.0
Transmission Type	Electronically controlled hydrostatic transmission
Weights
Operational Weight	25,320 - 26,070 lbs ( 11 kg )

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon