List Your Equipment For Free  /  Seller Login

Vermeer Introduces PD5, PD5R Pile Drivers

Tue October 15, 2019 - National Edition
Vermeer


The PD5R features a full-function wireless remote control that can engage the hammer, accurately align the pile to complete verticality using the auto plumb feature and position the machine.
The PD5R features a full-function wireless remote control that can engage the hammer, accurately align the pile to complete verticality using the auto plumb feature and position the machine.

Vermeer is expanding its pile driver product line with the introduction of two new models. The Vermeer PD5 and PD5R pile drivers combine efficient operation and accuracy into a compact, lightweight machine well suited for working on smaller solar installation projects, congested job sites and civil fencing and guardrail installation applications.

With a 15 ft. (4.6 m) mast that can remain fully assembled when transporting and aided by a 90-degree rotating platform, the design of the PD5 and PD5R can help ease the setup and teardown process. With transportation weights of 10,350 lbs. (4,694.7 kg) for the PD5 and 10,300 lbs. (4,672 kg) for the PD5R, multiple units can be transported on a single trailer.

The PD5 features machine-integrated controls located on the side of the machine. The PD5R features a full-function wireless remote control that can engage the hammer, accurately align the pile to complete verticality using the auto plumb feature and position the machine. Both machines can use an optional laser receiver or a compatible third-party GPS system to help improve productivity by better aligning the machine to the specified pile install location.

"The solar industry has experienced tremendous growth in the last few years, and the Vermeer PD10 and PD10R pile drivers have been among the most widespread machines used for installing ground mount solar piles," said Ed Savage, product manager at Vermeer. "Of course, not every job site is the same, so we created the new PD5R and PD5 pile drivers to give contractors smaller and more lightweight options. These units include many of the same features as the PD10 and have similar productivity in a variety of soil conditions."

Both pile drivers are powered by a Cat 49 hp (36.5 kW) Tier IV Final diesel engine, have a forward travel speed of 2.6 miles per hour (4.18 kmh) so operators can move quickly from pile to pile and feature a mast pull-down that is rigidly attached to the mast chain to deliver powerful force.

Both machines will be available early 2020.

For more information, visit Vermeer.com.




Today's top stories

Florida's Sarasota Bradenton International Airport Sees $105M Terminal Expansion

Louisville Pump Station Receives $230M Update

Rokbak Haul Track Telematics Boost Uptime With Proactive Maintenance

SISO Air, InTerra Form Strategic Reseller Agreement

Hitachi Construction Machinery Wins Silver in 2024 Anthem Award

Balfour Beatty's Carolinas Operations Selected for Over $36M in Special Project Works

Caterpillar to Spotlight 'Next 100 Years' at CES 2025

Liebherr to Exhibit at World of Concrete 2025


 







39.95234 \\ -75.16379 \\ Fort Washington \\ PA