Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 279C2 Compact Track Loader is a powerful and versatile machine designed to handle a wide range of tasks with ease. With a compact design and impressive performance capabilities, this loader offers exceptional maneuverability and efficiency on the job site. From its high breakout force and operating capacities to its reliable hydraulic system and comfortable cab, the 279C2 is a top choice for contractors and operators looking for a dependable and efficient compact track loader.
FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471:1994 |
Bucket hinge pin | 123 in (313 cm) |
Bucket Pin Height - Carry Position | 8 in (20 cm) |
Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
Clearance at Max Lift and Dump | 8 ft (2 m) |
Clearance at Maximum Lift and Dump | 96 in (243 cm) |
Departure Angle | 44 degrees |
Dump angle | 40 degrees |
Ground Clearance | 9 in (23 cm) |
Height - Top of Cab | 7 ft (2 m) |
Length - Track on Ground | 64 in (163 cm) |
Length - with Bucket | 12 ft (4 m) |
Length - With Bucket on Ground | 145 in (368 cm) |
Maximum Dump Angle | 40 degrees |
Maximum Overall Height | 158 in (401 cm) |
Maximum Reach - With Arms Parallel | 55 in (139 cm) |
Overall height | 13 ft (4 m) |
Overall Length - Track | 84 in (213 cm) |
Overall Track Length | 7 ft (2 m) |
Rack Back Angle - Maximum Height | 85 degrees |
Reach at Max Lift and Dump | 2 ft (1 m) |
Reach at Maximum Lift/Dump | 23 in (59 cm) |
Turn Radius from Center - Bucket | 88 in (224 cm) |
Turn Radius from Center - Coupler | 57 in (146 cm) |
Turn Radius from Center - Rear | 69 in (176 cm) |
Turning Radius from Center - machine rear | 68 in (173 cm) |
Vehicle Width | 78 in (198 cm) |
Width Over Tracks | 7 ft (2 m) |
Bore | 3 in (9 cm) |
Displacement | 201 cu in (3,294 cu cm) |
Engine Make | Caterpillar |
Engine Model | Cat C3.4T |
Gross Power | 74 hp (55 kw) |
Gross Power - SAE J1995 | 74 hp (55 kw) |
Net Power | 73 hp (54 kw) |
Net Power - SAE 1349 | 73 hp (54 kw) |
Stroke | 5 in (12 cm) |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power | 43 hp (32 kw) |
Loader Hydraulic Flow | 22 gpm (83 lpm) |
Loader Hydraulic Pressure | 3335 psi |
Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
Maximum Loader Hydraulic Pressure | 4061 psi |
Pump Flow | 22 gpm (84 lpm) |
Pump Type | Standard |
Relief Valve Pressure | 3335.9 psi |
Breakout Force | 7,308 lbs (3,315 kg) |
Operating capacity (ISO 14397) | 3,049 lbs (1,383 kg) |
Tipping Load | 6,100 lbs (2,767 kg) |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Tilt Cylinder | 7,308 lbs (3,315 kg) |
Cooling System Fluid Capacity | 4 gal (14 l) |
Fuel Capacity | 26 gal (98 l) |
Ground Contact Area | 2,303 cu in (37,739 cu cm) |
Ground Pressure | 4.3 psi |
Hydraulic System Fluid Capacity | 15 gal (57 l) |
Operating Voltage | 12 volts |
Operating Weight | 9,866 lbs (4,475 kg) |
Rated Operating Capacities - 35% Tipping Load | 2,135 lbs (968 kg) |
Rated Operating Capacities - 50% Tipping Load | 3,050 lbs (1,383 kg) |
Tipping Load | 6,100 lbs (2,767 kg) |
Travel Speed | 9 mph (14 kph) |
Travel Speed Forward | 5 mph (8 kph) |
Travel Speed Forward - 2-Speed | 9 mph (14 kph) |
Travel Speed Reverse | 5 mph (8 kph) |
Travel Speed Reverse - 2-Speed | 9 mph (14 kph) |
Cooling System | 4 gal (14 l) |
Engine Crankcase | 3 gal (10 l) |
Fuel Tank | 26 gal (98 l) |
Hydraulic System | 15 gal (57 l) |
Hydraulic Tank | 11 gal (42 l) |
Counterweight, Standard | 126 lbs (57 kg) |
Ground Contact Area | 2,310 cu in (37,848 cu cm) |
Ground Pressure | 4.3 psi |
Length of Track on Ground | 5 ft (2 m) |
Operating Weight | 9,865 lbs (4,475 kg) |