- Category: Compact Track Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 299C ➔
Introducing the Caterpillar 299C Compact Track Loader, a powerful and versatile machine designed for efficiency and performance on the job site. With a gross power of 94 horsepower, a maximum dump angle of 51 degrees, and an operating weight of 10,730 pounds, this compact track loader is equipped to handle a variety of tasks with ease. Featuring a loader hydraulic flow of 22 gpm, a hydraulic system fluid capacity of 15.1 gallons, and ground pressure of 4.3 psi, the Caterpillar 299C is a reliable and capable piece of equipment for any construction or landscaping project.
Cab
FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
Bucket Pin Height - Carry Position | 8 in (20 cm) |
Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
Bucket Pin Reach - Maximum Lift | 15 in (37 cm) |
Clearance at Max Lift and Dump | 8 ft (2 m) |
Clearance at Maximum Lift and Dump | 98 in (249 cm) |
Departure Angle | 38 degrees |
Ground Clearance | 9 in (23 cm) |
Height - Top of Cab | 7 ft (2 m) |
Length - Track on Ground | 70 in (177 cm) |
Length - with Bucket | 13 ft (4 m) |
Length - With Bucket on Ground | 150 in (382 cm) |
Maximum Dump Angle | 51 degrees |
Maximum Overall Height | 162 in (412 cm) |
Maximum Reach - With Arms Parallel | 50 in (127 cm) |
Overall Length - Track | 89 in (227 cm) |
Rack Back Angle - Maximum Height | 83 degrees |
Reach at Max Lift and Dump | 3 ft (1 m) |
Reach at Maximum Lift/Dump | 30 in (76 cm) |
Turn Radius from Center - Bucket | 91 in (231 cm) |
Turn Radius from Center - Coupler | 58 in (147 cm) |
Turn Radius from Center - Rear | 70 in (178 cm) |
Turning Radius from Center - inc bucket | 91 in (232 cm) |
Turning Radius from Center - machine rear | 70 in (178 cm) |
Vehicle Width | 78 in (198 cm) |
Width Over Tracks | 7 ft (2 m) |
Engine
Aspiration | Turbocharged |
Bore | 4 in (9 cm) |
Displacement | 201 cu in (3,294 cu cm) |
Engine Model | Cat C3.4T |
Gross Power | 94 hp (70 kw) |
Gross Power - SAE J1995 | 94 hp (70 kw) |
Net Power | 90 hp (67 kw) |
Net Power - SAE 1349 | 90 hp (67 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2500 rpm |
Stroke | 5 in (12 cm) |
Hydraulic System
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power | 43 hp (32 kw) |
Loader Hydraulic Flow | 22 gpm (83 lpm) |
Loader Hydraulic Pressure | 3335 psi |
Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
Maximum Loader Hydraulic Pressure | 4061 psi |
Pump Flow | 22 gpm (84 lpm) |
Relief Valve Pressure | 3335 psi |
Loader
Breakout Force | 7,308 lbs (3,315 kg) |
Bucket Capacity | 1 cu yd (0 cu m) |
Operating Load | 4,150 lbs (1,882 kg) |
Tipping Angle | 8338 degrees |
Operating Specifications
Alternator Supplied Amperage | 90 amps |
Breakout Force - Tilt Cylinder | 7,308 lbs (3,315 kg) |
Cooling System Fluid Capacity | 4 gal (14 l) |
Engine Oil Capacity | 3 gal (10 l) |
Fuel Capacity | 26 gal (98 l) |
Ground Contact Area | 2,504 cu in (41,033 cu cm) |
Ground Pressure | 4.3 psi |
Hydraulic System Fluid Capacity | 15 gal (57 l) |
Max Speed - high range | 9 mph (14 kph) |
Max Speed - low range | 5 mph (8 kph) |
Operating Voltage | 12 volts |
Operating Weight | 10,730 lbs (4,867 kg) |
Rated Operating Capacities - 35% Tipping Load | 2,905 lbs (1,318 kg) |
Rated Operating Capacities - 50% Tipping Load | 4,150 lbs (1,882 kg) |
Rated Operating Capacity with Optional Counterweight | 4,418 lbs (2,004 kg) |
Tipping Load | 8,338 lbs (3,782 kg) |
Power Train
Travel Speed Forward | 5 mph (8 kph) |
Travel Speed Forward - 2-Speed | 9 mph (14 kph) |
Travel Speed Reverse | 5 mph (8 kph) |
Travel Speed Reverse - 2-Speed | 9 mph (14 kph) |
Service Refill Capacities
Cooling System | 4 gal (14 l) |
Engine Crankcase | 3 gal (10 l) |
Fuel Tank | 26 gal (98 l) |
Hydraulic System | 15 gal (57 l) |
Hydraulic Tank | 11 gal (42 l) |
Undercarriage
Ground Contact Area | 2,504 cu in (41,033 cu cm) |
Ground Pressure | 4.3 psi |
Length of Track on Ground | 6 ft (2 m) |
Weights
Operating Weight | 10,730 lbs (4,867 kg) |