Categories ↠ Compact Track Loaders ↠ Gehl RT175

Gehl RT175 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Gehl ➔
Model: RT175 ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	14 in (35 cm)
Height - Top of Cab	7 ft (2 m)
Length - with Bucket	12 ft (4 m)
Length - without Bucket	9 ft (3 m)
Reach at Max Lift and Dump	3 ft (1 m)
Turning Radius from Center - inc bucket	92 in (232 cm)
Turning Radius from Center - machine rear	62 in (158 cm)
Width Over Tracks	5 ft (2 m)

Engine

Aspiration	Natural
Displacement	203 cu in (3,327 cu cm)
Engine Model	4TNV98-ZNTBL
Net Power	68 hp (51 kw)
Number of Cylinders	4
Peak Torque	179 lbs ft (243 nm)
Power Measured @	2500 rpm
Torque Measured @	1600 rpm

Hydraulic System

Pump Flow

19 gpm (70 lpm)

Loader

Bucket Width	66 in (168 cm)
Operating Load	1,750 lbs (794 kg)
Tipping Angle	5000 degrees

Operating Specifications

Cooling System Fluid Capacity	4 gal (14 l)
Fuel Capacity	24 gal (92 l)
Hydraulic System Fluid Capacity	11 gal (42 l)
Max Speed - high range	8 mph (12 kph)
Max Speed - low range	5 mph (8 kph)
Operating Voltage	12 volts
Operating Weight	8,605 lbs (3,903 kg)

Undercarriage

Ground Pressure	6.2 psi
Length of Track on Ground	5 ft (1 m)
Number of Track Rollers per Side	4
Track Gauge	4 ft (1 m)
Width of Track	13 in (32 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon