Categories ↠ Compact Track Loaders ↠ John Deere 333E

John Deere 333E Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: John Deere ➔
Model: 333E ➔

General Specifications

Dimensions

Dump angle	45 degrees
Dump Height	102 in (259 cm)
Dump reach	39 in (100 cm)
Ground Clearance	10 in (26 cm)
Height - Top of ROPS/FOPS	85 in (215 cm)
Hinge pin height, maximum height	126 in (320 cm)
Length - with Bucket	12 ft (4 m)
Length - without Bucket	10 ft (3 m)
Turning Radius	7 ft (2 m)
Width Over Tracks	2 ft (0 m)

Engine

Aspiration	Turbocharged
Displacement	189 cu in (3,100 cu cm)
Engine Make	Yanmar
Engine Model	4TNV94CHT
Gross Power	100 hp (75 kw)
Net Power	97 hp (72 kw)
Number of Cylinders	4
Peak Torque	291 lbs ft (395 nm)
Power Measured @	2500 rpm
Torque Measured @	1700 rpm

Hydraulic System

Hydraulic Horsepower-Standard Flow	50 hp (37 kw)
Pump Flow	25 gpm (95 lpm)
Relief Valve Pressure	3450.1 psi

Loader

Boom breakout force	6,600 lbs (2,994 kg)
Breakout Force	13,887 lbs (6,299 kg)
Operating Load	3,303 lbs (1,498 kg)
Tipping Load	9,434 lbs (4,279 kg)

Operating Specifications

Alternator Supplied Amperage	70 amps
Fuel Capacity	26 gal (97 l)
Max Speed - high range	8 mph (13 kph)
Max Speed - low range	5 mph (9 kph)
Operating Voltage	12 volts
Operating Weight	11,810 lbs (5,357 kg)

Undercarriage

Ground Pressure	4.6 psi
Number of Track Rollers per Side	5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon