- Category: Compact Track Loaders ➔
- Manufacturer: Volvo ➔
- Model: MCT125C ➔
The Volvo MCT125C Compact Track Loader is a powerful and versatile machine designed for a variety of construction and landscaping tasks. With impressive bucket breakout forces, multiple bucket options, and generous operating capacities, this compact track loader is ready to tackle any project with ease. Its efficient hydraulic system, strong engine performance, and comfortable operator cab make it a top choice for professionals seeking reliability and productivity on the job site.
General Specifications
Bucket
Breakout force, curl | 7,187 lbs (3,260 kg)
|
Breakout force, lift | 5,807 lbs (2,634 kg)
|
General Purpose Bucket Heaped | 1 cu yd (1 cu m)
|
General Purpose Bucket Height | 2 ft (1 m)
|
General Purpose Bucket Length | 3 ft (1 m)
|
General Purpose Bucket Weight | 542 lbs (246 kg)
|
General Purpose Bucket Width | 7 ft (2 m)
|
Landscape Bucket Heaped cap | 1 cu yd (1 cu m)
|
Landscape Bucket Height | 2 ft (1 m)
|
Landscape Bucket Length | 3 ft (1 m)
|
Landscape Bucket Weight | 1 cu in (8 cu cm)
|
Landscape Bucket Width | 7 ft (2 m)
|
Multi Purpose Bucket Heaped cap | 1 cu yd (1 cu m)
|
Multi Purpose Bucket Height | 2 ft (1 m)
|
Multi Purpose Bucket Length | 3 ft (1 m)
|
Multi Purpose Bucket Weight | 842 lbs (382 kg)
|
Multi Purpose Bucket Width | 7 ft (2 m)
|
Capacities
Cooling system | 4 gal (16 l)
|
Engine oil w/ filter change | 4 gal (15 l)
|
Fuel Tank | 27 gal (103 l)
|
Hydraulic oil reservoir | 7 gal (26 l)
|
Hydraulic system | 16 gal (60 l)
|
Tipping Load | 7,990 lbs (3,624 kg)
|
Dimensions
Angle of departure | 28.7 degrees
|
Attachment roll back angle | 30 degrees
|
Clearance at Max Lift and Dump | 8 ft (2 m)
|
Dump angle | 42 degrees
|
Dump Height | 8 ft (2 m)
|
Dump reach | 34 in (87 cm)
|
Height - Top of Cab | 7 ft (2 m)
|
Height to Hinge Pin | 125 in (318 cm)
|
Length - with Bucket | 12 ft (4 m)
|
Length - without Bucket | 9 ft (3 m)
|
Overall height | 7 ft (2 m)
|
Overall length (L/bucket) | 10 ft (3 m)
|
Overall length (W/bucket) | 12 ft (4 m)
|
Reach at Max Lift and Dump | 3 ft (1 m)
|
Turning Radius | 6 ft (2 m)
|
Turning Radius from Center - inc bucket | 69 in (176 cm)
|
Turning Radius from Center - machine rear | 69 in (176 cm)
|
Turning radius front L/bucket | 5 ft (1 m)
|
Turning radius front W/bucket | 8 ft (2 m)
|
Wheelbase | 6 ft (2 m)
|
Width Over Tracks | 7 ft (2 m)
|
Engine
Alternator | 342000 amps
|
Battery | 12 - 109 (V - Ah)
|
Fuel Type | Diesel
|
Gross horsepower - SAE J1995 | 74 hp (55 kw)
|
Max Torque | 295 lbs ft (400 nm)
|
Net Power | 84 hp (63 kw)
|
Number of Cylinders | 4
|
Peak Torque | 267 lbs ft (362 nm)
|
Power Measured @ | 2200 rpm
|
Starter | 6 hp (4 kw)
|
Torque Measured @ | 1800 rpm
|
Hydraulic System
Pump Flow | 23 gpm (87 lpm)
|
Relief Valve Pressure | 3335 psi
|
Loader
Bucket Capacity | 1 cu yd (1 cu m)
|
Bucket Width | 78 in (198 cm)
|
High flow pump output | 33 gpm (125 lpm)
|
Operating Load | 2,600 lbs (1,179 kg)
|
Operating Load Rating | 2,797 lbs (1,269 kg)
|
Operating Width | 78 in (198 cm)
|
Standard hydraulic pump output | 24 gpm (90 lpm)
|
System pressure | 3335 psi
|
Tipping Angle | 7991 degrees
|
Operating Specifications
Alternator Supplied Amperage | 95 amps
|
Cooling System Fluid Capacity | 4 gal (16 l)
|
Engine Oil Capacity | 4 gal (15 l)
|
Fuel Capacity | 27 gal (103 l)
|
Hydraulic System Fluid Capacity | 16 gal (60 l)
|
Max Speed - high range | 8 mph (13 kph)
|
Max Speed - low range | 6 mph (9 kph)
|
Operating Voltage | 12 volts
|
Operating Weight | 10,205 lbs (4,629 kg)
|
Performance
Curl | 1.4 seconds
|
Dump | 1.8 seconds
|
Lift arm path | Vertical
|
Lower (power down) | 3.5 seconds
|
Raise (lifting) | 5.1 seconds
|
Rated operating load, 35% tip | 2,599 lbs (1,179 kg)
|
Speeds
Single speed | 6 mph (9 kph)
|
Undercarriage
Width of Track | 18 in (45 cm)
|
Weights
Weight | 10,756 lbs (4,879 kg)
|