Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Clearance at Full Height and Dump | 9 ft (3 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 9 ft (3 m) |
Length of Track on Ground | 6 ft (2 m) |
Length w/o Blade | 15 ft (5 m) |
Length with Bucket on Ground | 15 ft (5 m) |
Reach at Dump Height | 3 ft (1 m) |
Width to Outside of Tracks | 6 ft (2 m) |
Aspiration | Altitude compensating turbocharger |
Displacement | 276 cu in (4,523 cu cm) |
Engine Model | 4045T |
Gross Power | 73 hp (54 kw) |
Max Torque | 228 lbs ft (309 nm) |
Net Power | 70 hp (52 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2100 rpm |
Torque Measured @ | 1300 rpm |
Pump Flow Capacity | 31 gpm (117 lpm) |
Pump Type | Gear |
Relief Valve Pressure | 2600 psi |
Alternator Supplied Amperage | 95 amps |
Breakout Force Bucket | 15,735 lbs (7,137 kg) |
Bucket Capacity - heaped | 1 cu yd (1 cu m) |
Bucket Capacity - struck | 1 cu yd (1 cu m) |
Cooling System Fluid Capacity | 5 gal (17 l) |
Engine Oil Capacity | 2 gal (9 l) |
Final Drive Fluid Capacity - each | 2 gal (7 l) |
Final Drives Fluid Capacity | 2 gal (7 l) |
Fuel Capacity | 41 gal (155 l) |
Hydraulic Fluid Capacity | 18 gal (68 l) |
Hydraulic System Fluid Capacity | 18 gal (68 l) |
Max Speed | 6 mph (9 kph) |
Operating Voltage | 12 volts |
Operating Weight | 18,745 lbs (8,503 kg) |
Static Tipping Load | 11,800 lbs (5,352 kg) |
Blade Angle (both directions) | 25 degrees |
Capacity | 1 cu yd (1 cu m) |
Width | 7 ft (2 m) |
Max Speed - Forward | 6 mph (9 kph) |
Max Speed - Reverse | 6 mph (10 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 4 |
Transmission Type | Full power shift Dura-Shift with torque converter |
Ground Contact Area | 2,128 cu in (34,872 cu cm) |
Ground Pressure | 8.9 psi |
Length of Track on Ground | 6 ft (2 m) |
Number of Shoes per Side | 37 |
Number of Track Rollers per Side | 5 |
Standard Shoe Size | 14 in (36 cm) |
Track Gauge | 57 in (145 cm) |
Track Pitch | 6 in (16 cm) |
Track Shoe Width | 14 in (36 cm) |