Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Ground Clearance | 2 ft (0 m) |
Height - Top of Cab | 11 ft (3 m) |
Length of Track on Ground | 10 ft (3 m) |
Length w/ Blade | 19 ft (6 m) |
Length w/o Blade | 14 ft (4 m) |
Width Over Tracks | 8 ft (2 m) |
Aspiration | Intercooled and turbocharged |
Displacement | 610 cu in (9,996 cu cm) |
Engine Model | D926 TI |
Max Torque | 797 lbs ft (1,081 nm) |
Net Power | 230 hp (172 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Torque Measured @ | 1300 rpm |
Pump Flow Capacity | 77 gpm (291 lpm) |
Pump type | Variable-displacement piston pump with load-sensing proportional pump flow control |
Relief Valve Pressure | 2320 psi |
Alternator Supplied Amperage | 55 amps |
Cooling System Fluid Capacity | 18 gal (67 l) |
Engine Oil Capacity | 7 gal (25 l) |
Final Drives Fluid Capacity | 4 gal (14 l) |
Fuel Capacity | 119 gal (450 l) |
Hydraulic Fluid Capacity | 47 gal (178 l) |
Operating Voltage | 24 volts |
Operating Weight | 50,600 lbs (22,952 kg) |
Blade Angle (both directions) | 25 degrees |
Capacity | 10 cu yd (7 cu m) |
Height | 57 in (145 cm) |
Width | 13 ft (4 m) |
Max Speed - Forward | 7 mph (11 kph) |
Max Speed - Reverse | 7 mph (11 kph) |
Number of Forward Gears | 3 |
Number of Reverse Gears | 3 |
Transmission Type | Dual-path electronic-controlled closed-loop hydrostatic drive |
Ground Contact Area | 4,680 cu in (76,692 cu cm) |
Ground Pressure | 10.9 psi |
Number of Shoes per Side | 39 |
Number of Track Rollers per Side | 7 |
Standard Shoe Size | 20 in (51 cm) |
Track Gauge | 7 ft (2 m) |
Track Pitch | 9 in (22 cm) |