Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Cutting Height | 31 ft (9 m) |
Max Loading Height | 22 ft (7 m) |
Max Vertical Wall Digging Depth | 15 ft (5 m) |
Shipping Height of Unit | 11 ft (3 m) |
Shipping Length of Unit | 33 ft (10 m) |
Max Cutting Height | 32 ft (10 m) |
Max Digging Depth | 22 ft (7 m) |
Max Loading Height | 23 ft (7 m) |
Max Reach Along Ground | 33 ft (10 m) |
Max Vertical Wall Digging Depth | 17 ft (5 m) |
Shipping Height of Unit | 10 ft (3 m) |
Shipping Length of Unit | 33 ft (10 m) |
Max Cutting Height | 32 ft (10 m) |
Max Digging Depth | 24 ft (7 m) |
Max Loading Height | 24 ft (7 m) |
Max Reach Along Ground | 34 ft (10 m) |
Max Vertical Wall Digging Depth | 19 ft (6 m) |
Shipping Height of Unit | 11 ft (3 m) |
Shipping Length of Unit | 33 ft (10 m) |
Maximum Bucket Capacity | 2 cu yd (1 cu m) |
Minimum Bucket Capacity | 1 cu yd (1 cu m) |
Reference Bucket Capacity | 2 cu yd (1 cu m) |
Ground Clearance | 2 ft (0 m) |
Height - Top of Cab | 10 ft (3 m) |
Length of Track on Ground | 13 ft (4 m) |
Removal Counterweight Clearance | 4 ft (1 m) |
Tail Swing Radius | 10 ft (3 m) |
Width to Outside of Tracks | 11 ft (3 m) |
Aspiration | Turbocharged air-to-water intercooled |
Displacement | 359 cu in (5,883 cu cm) |
Engine Model | DL06 |
Max Torque | 564 lbs ft (765 nm) |
Power Measured @ | 2000 rpm |
Torque Measured @ | 1400 rpm |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 6 gal (24 l) |
Engine Oil Capacity | 7 gal (27 l) |
Fuel Capacity | 106 gal (400 l) |
Hydraulic Pump Flow Capacity | 116 gpm (438 lpm) |
Hydraulic System Fluid Capacity | 87 gal (330 l) |
Hydraulic System Relief Valve Pressure | 4685 psi |
Operating Voltage | 24 volts |
Swing Drive Fluid Capacity | 1 gal (5 l) |
Swing Speed | 10 rpm |
Ground Pressure | 7.2 psi |
Max Travel Speed | 3 mph (5 kph) |
Number of Carrier Rollers per Side | 2 |
Number of Shoes per Side | 51 |
Number of Track Rollers per Side | 10 |
Shoe Size | 24 in (60 cm) |