Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Cutting Height | 33 ft (10 m) |
Max Loading Height | 23 ft (7 m) |
Max Vertical Wall Digging Depth | 17 ft (5 m) |
Max Cutting Height | 34 ft (10 m) |
Max Digging Depth | 25 ft (8 m) |
Max Loading Height | 24 ft (7 m) |
Max Reach Along Ground | 36 ft (11 m) |
Max Vertical Wall Digging Depth | 20 ft (6 m) |
Shipping Height of Unit | 11 ft (3 m) |
Shipping Length of Unit | 37 ft (11 m) |
Max Cutting Height | 36 ft (11 m) |
Max Digging Depth | 27 ft (8 m) |
Max Loading Height | 31 ft (9 m) |
Max Reach Along Ground | 39 ft (12 m) |
Max Vertical Wall Digging Depth | 23 ft (7 m) |
Maximum Bucket Capacity | 2 cu yd (2 cu m) |
Minimum Bucket Capacity | 2 cu yd (1 cu m) |
Reference Bucket Capacity | 2 cu yd (2 cu m) |
Ground Clearance | 2 ft (1 m) |
Height - Top of Cab | 10 ft (3 m) |
Length of Track on Ground | 13 ft (4 m) |
Removal Counterweight Clearance | 4 ft (1 m) |
Tail Swing Radius | 12 ft (4 m) |
Width to Outside of Tracks | 11 ft (3 m) |
Aspiration | Turbocharged air to air intercooled |
Displacement | 466 cu in (7,636 cu cm) |
Engine Model | DL08 |
Max Torque | 846 lbs ft (1,147 nm) |
Net Power | 247 hp (184 kw) |
Power Measured @ | 1750 rpm |
Torque Measured @ | 1300 rpm |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 9 gal (34 l) |
Engine Oil Capacity | 10 gal (36 l) |
Fuel Capacity | 145 gal (550 l) |
Hydraulic Pump Flow Capacity | 140 gpm (530 lpm) |
Hydraulic System Fluid Capacity | 122 gal (460 l) |
Hydraulic System Relief Valve Pressure | 4690 psi |
Operating Voltage | 24 volts |
Swing Drive Fluid Capacity | 2 gal (6 l) |
Swing Speed | 8.9 rpm |
Ground Pressure | 9.2 psi |
Max Travel Speed | 3 mph (5 kph) |
Number of Carrier Rollers per Side | 2 |
Number of Shoes per Side | 48 |
Number of Track Rollers per Side | 9 |
Shoe Size | 24 in (60 cm) |
Track Gauge | 9 ft (3 m) |