Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Cutting Height | 32 ft (10 m) |
Max Loading Height | 22 ft (7 m) |
Max Vertical Wall Digging Depth | 4 ft (1 m) |
Shipping Height of Unit | 14 ft (4 m) |
Shipping Length of Unit | 38 ft (11 m) |
Max Cutting Height | 37 ft (11 m) |
Max Digging Depth | 28 ft (8 m) |
Max Loading Height | 26 ft (8 m) |
Max Reach Along Ground | 41 ft (12 m) |
Max Vertical Wall Digging Depth | 16 ft (5 m) |
Max Cutting Height | 36 ft (11 m) |
Max Digging Depth | 26 ft (8 m) |
Max Loading Height | 26 ft (8 m) |
Max Reach Along Ground | 39 ft (12 m) |
Max Vertical Wall Digging Depth | 15 ft (4 m) |
Shipping Height of Unit | 12 ft (4 m) |
Shipping Length of Unit | 40 ft (12 m) |
Maximum Bucket Capacity | 4 cu yd (3 cu m) |
Minimum Bucket Capacity | 1 cu yd (1 cu m) |
Reference Bucket Capacity | 4 cu yd (3 cu m) |
Ground Clearance | 3 ft (1 m) |
Height - Top of Cab | 11 ft (3 m) |
Length of Track on Ground | 15 ft (4 m) |
Removal Counterweight Clearance | 5 ft (1 m) |
Tail Swing Radius | 12 ft (4 m) |
Width to Outside of Tracks | 13 ft (4 m) |
Aspiration | Turbocharged air to air intercooled |
Displacement | 669 cu in (10,963 cu cm) |
Engine Model | DV11 |
Max Torque | 1,137 lbs ft (1,542 nm) |
Net Power | 328 hp (245 kw) |
Power Measured @ | 1800 rpm |
Torque Measured @ | 1300 rpm |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 11 gal (40 l) |
Engine Oil Capacity | 12 gal (44 l) |
Fuel Capacity | 164 gal (620 l) |
Hydraulic Pump Flow Capacity | 188 gpm (710 lpm) |
Hydraulic System Fluid Capacity | 132 gal (500 l) |
Hydraulic System Relief Valve Pressure | 4550 psi |
Operating Voltage | 24 volts |
Swing Drive Fluid Capacity | 1 gal (4 l) |
Swing Speed | 8.8 rpm |
Ground Pressure | 12.5 psi |
Max Travel Speed | 3 mph (5 kph) |
Number of Carrier Rollers per Side | 3 |
Number of Shoes per Side | 53 |
Number of Track Rollers per Side | 9 |
Shoe Size | 24 in (60 cm) |