Hyster H1050HD Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H1050HD ➔

General Specifications

Brakes

Parking brake	Spring apply dry disc
Service brake	Oil immersed (wet) disc

Dimensions

Gradeability	44%
Ground Clearance	19 in (47 cm)
Height to Top of Overhead Guard	13 ft (4 m)
Length to Fork Face	27 ft (8 m)
Max Fork Height	15 ft (4 m)
Overall Height - mast lowered	17 ft (5 m)
Overall Width	14 ft (4 m)
Turning Radius	26 ft (8 m)
Wheelbase	18 ft (5 m)

Engine

Alternator	120 amps
Displacement	543 cu in (8,901 cu cm)
Emission Tier Level	TIER 4F
Engine Make	Cummins
Engine Model	QSL 9
Fuel Type	Diesel
Number of Cylinders	6
Power	350 hp (261 kw)
Power Measured @	2100 rpm
Torque	1,200 lbs ft (1,627 nm)

MAST

Lift Speed	51 ft/min (16 m/min)
Load Capacity	105,000 lbs (47,627 kg)
Load Center	48 in (122 cm)
Lower Speed	98 ft/min (30 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	10 degrees
Max Fork Spread	107 in (271 cm)

Operating Specifications

Axle load - front	217,353 lbs (98,590 kg)
Axle load - rear	14,259 lbs (6,468 kg)
DEF tank capacity	15 gal (57 l)
Drawbar Pull	100,619 lbs (45,640 kg)
Front Tire Size	18.00 x 25-40PR
Fuel Capacity	219 gal (829 l)
Hydraulic System Fluid Capacity	174 gal (659 l)
Max Speed	12 mph (19 kph)
Oil System Fluid Capacity	27 gal (100 l)
Operational Weight	126,611 lbs (57,430 kg)
Rear Tire Size	18.00 x 25-40PR
Tire Type	Pneumatic

Transmission

Drive system	Powershift Transmission
Number of Forward / Reverse Speeds	4-4
Transmission Type	SOH TE-32

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon