Hyster H550HD Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H550HD ➔

General Specifications

Brakes

Parking brake	Spring apply dry disc
Service brake	Oil immersed (wet) disc

Dimensions

Gradeability	35%
Ground Clearance	16 in (41 cm)
Height to Top of Overhead Guard	11 ft (3 m)
Length to Fork Face	21 ft (6 m)
Max Fork Height	10 ft (3 m)
Overall Height - mast lowered	12 ft (4 m)
Overall Width	11 ft (3 m)
Turning Radius	20 ft (6 m)
Wheelbase	14 ft (4 m)

Engine

Alternator	120 amps
Battery	900 CCA
Displacement	409 cu in (6,701 cu cm)
Emission Tier Level	TIER 4F
Engine Make	Cummins
Engine Model	QSB 6.7L
Fuel Type	Diesel
Number of Cylinders	6
Power	260 hp (194 kw)
Power Measured @	2200 rpm
Torque	730 lbs ft (990 nm)
Torque Measured @	1500 rpm

MAST

Lift Speed	67 ft/min (20 m/min)
Load Capacity	55,000 lbs (24,948 kg)
Load Center	48 in (122 cm)
Lower Speed	98 ft/min (30 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	10 degrees
Max Fork Spread	122 in (311 cm)

Operating Specifications

Axle load - front	124,425 lbs (56,438 kg)
Axle load - rear	12,165 lbs (5,518 kg)
Drawbar Pull	54,400 lbs (24,675 kg)
Front Tire Size	14.00 x 24-28PR
Fuel Capacity	96 gal (363 l)
Hydraulic System Fluid Capacity	86 gal (326 l)
Max Speed	16 mph (26 kph)
Operating Voltage	24 volts
Operational Weight	81,589 lbs (37,008 kg)
Rear Tire Size	14.00 x 24-28PR
Tire Type	Pneumatic

Transmission

Drive system	Powershift Transmission
Number of Forward / Reverse Speeds	5-3
Transmission Type	ZF WG 211

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon