Hyster H70FT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H70FT ➔

General Specifications

Brakes

Parking brake	Hand/Mechanical
Service brake	Foot/Hydraulic

Dimensions

Gradeability	22%
Ground Clearance	7 in (19 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	9 ft (3 m)
Max Fork Height	11 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	9 ft (3 m)
Turning Radius	8 ft (2 m)
Wheelbase	6 ft (2 m)

Engine

Displacement	143 cu in (2,343 cu cm)
Engine Model	PSI 2.4L
Fuel Type	LPG
Number of Cylinders	4
Power	59 hp (44 kw)
Power Measured @	2700 rpm
Torque	121 lbs ft (164 nm)
Torque Measured @	2000 rpm

MAST

Lift Speed	108 ft/min (33 m/min)
Load Capacity	7,000 lbs (3,175 kg)
Load Center	24 in (61 cm)
Lower Speed	93 ft/min (28 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	6 degrees

Operating Specifications

Axle load - front	3,810 lbs (1,728 kg)
Axle load - rear	6,547 lbs (2,970 kg)
Drawbar Pull	4,465 lbs (2,025 kg)
Front Tire Size	28 x 9 - 15
Fuel Capacity	14 gal (53 l)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	12 gal (46 l)
Max Speed	12 mph (20 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	10,357 lbs (4,698 kg)
Rear Tire Size	6.50 x 10
Tire Type	Pneumatic

Hyster H70FTs currently for sale

A 2018 Hyster H70FT From Newark Equipment Sales Corp. for $14,500.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon